搜索结果：telescopes

The performance of future observatories such as the Extremely Large Telescope is mainly limited by atmospheric turbulence and structural vibrations of the optical assembly. To further enhance the mitigation performance of adaptive optics, real-time information about the disturbances acting on the control loop is needed. Current systems therefore employ a combination of wavefront sensor- and accelerometer-based filters. In this work, methods using only data from natural- and laser guide star (NGS, LGS) measurements are presented, as telescopes like the Very Large Telescope already have multiple fast and high-resolution wavefront sensors installed. This approach also avoids the costly installation and operation of additional accelerometers on the optical elements. We introduce two innovative disturbance observer schemes to sense both turbulence and vibration information. A multi-rate estimator for atmospheric influences is based on Kalman filter theory and can incorporate NGS and LGS signals at different loop rates. The estimator for structural perturbations uses Gaussian process regression and can be implemented in an offline and online configuration. We validate the filter designs

Telescope arrays allow high-performance wide-field imaging systems to be built more quickly and at lower cost than conventional telescopes. Distributed aperture telescopes (the premier example of which is the Dragonfly Telephoto Array) are a special type of array in which all telescopes point at roughly the same position in the sky. In this configuration the array performs like a large and optically very fast single telescope with unusually good control over systematic errors. In a few key areas, such as low surface brightness imaging over wide fields of view, distributed aperture telescopes outperform conventional survey telescopes by a wide margin. In these Proceedings we outline the rationale for distributed aperture telescopes, and highlight the strengths and weaknesses of the concept. Areas of observational parameter space in which the design excels are identified. These correspond to areas of astrophysics that are both relatively unexplored and which have unusually strong breakthrough potential.

In the ROSAT era of the mid-1990's, the problems facing deep X-ray surveys could be largely solved with 10 m class telescopes. In the first decade of this new millennium, with X-ray telescopes such as the Chandra X-ray Observatory and XMM-Newton in operation, deep X-ray surveys are challenging 10 m telescopes. For example, in the Chandra Deep Field surveys, approximately 30% of the X-ray sources have optical counterparts fainter than R=25 (I=24). This paper reviews current progress with 6-10 m class telescopes in following up sources discovered in deep X-ray surveys, including results from several X-ray surveys which have depended on telescopes such as Keck, VLT and HET. Topics include the prospects for detecting extreme redshift (z>6) quasars and the first detections of normal and starburst galaxies at cosmologically interesting distances in the X-ray band. X-ray astronomy can significantly bolster the science case for the next generation of large aperture (30-100 m) ground-based telescopes and has already provided targets for these large telescopes through the Chandra and XMM-Newton surveys. The next generation of X-ray telescopes will continue to challenge large optical teles

Cosmic Microwave Background experiments need to measure polarization properties of the incoming radiation very accurately to achieve their scientific goals. As a result of that, it is necessary to properly characterize these instruments. However, there are not natural sources that can be used for this purpose. For this reason, we developed the PROTOtype CALibrator for Cosmology, PROTOCALC, which is a calibrator source designed for the 90 GHz band of these telescopes. This source is purely polarized and the direction of the polarization vector is known with an accuracy better than 0.1 deg. This source flew for the first time in May 2022 showing promising result.

The Cherenkov Telescope Array (CTA) is the next ground-based $γ$-ray observatory in the TeV $γ$-ray spectral region operating with the Imaging Atmospheric Cherenkov Technique. It is based on almost 70 telescopes of different class diameters - LST, MST and SST of 23, 12, and 4 m, respectively - to be installed in two sites in the two hemispheres (at La Palma, Canary Islands, and near Paranal, Chile). Several thousands of reflecting mirror tiles larger than 1 m$^2$ will be produced for realizing the segmented primary mirrors of a so large number of telescopes. Almost in parallel, the ASTRI Mini-Array (MA) is being implemented in Tenerife (Canary Islands), composed of nine 4 m diameter dual-mirror Cherenkov telescopes (very similar to the SSTs). We completed the mirror production for all nine telescopes of the ASTRI MA and two MST telescopes (400 segments in total) using the cold glass slumping replication technology. The results related to the quality achieved with a so large-scale production are presented, also discussing the adopted testing methods and approaches. They will be very useful for the adoption and optimization of the quality assurance process for the huge production (al

In this paper, a kinetic energy recovery system for large telescopes is presented, with the Atacama Large Aperture Submm Telescope (AtLAST) as a possible target application. The system consists of supercapacitors integrated in the DC-link of motor inverters through a bidirectional DC-DC converter. The optimal system design, based on the energy flow analysis within the telescope's power electronics, is introduced. The proposed system is simulated as part of the telescope's drives, providing not only a significant reduction in energy consumption of the telescope due to motion, but also remarkably reducing (or shaving) grid power peaks. We find that the system presented here can contribute to making both current and future observatories more sustainable.

The Las Cumbres Observatory operates a fleet of robotically controlled telescopes currently two 2m, nine 1m, and ten 0.4m telescopes, distributed amongst six sites covering both hemispheres. Telescopes of an aperture class are equipped with an identical set of optical imagers, and those data are subsequently processed by a common pipeline (BANZAI). The telescopes operate without direct human supervision, and assessing the daily and long-term scientific productivity of the fleet of telescopes and instruments poses an operational challenge. One key operational metric of a telescope/instrument system is throughput. We present a method of long-term performance monitoring based on nightly science observations: For every image taken in matching filters and within the footprint of the PANSTARRS DR1 catalog we derive a photometric zeropoint, which is a good proxy for system throughput. This dataset of over $250000$ data points enables us to answer questions about general throughput degradation trends, and how individual telescopes perform at the various sites. This particular metric is useful to plan the effort level for on-site support and to prioritize the cleaning and re-aluminizing sch

Space-based gamma-ray telescopes such as the Fermi Large Area Telescope have used single sided silicon strip detectors to track secondary charged particles produced by primary gamma-rays with high resolution. At the lower energies targeted by keV-MeV telescopes, two dimensional position information within a single detector is required for event reconstruction - especially in the Compton regime. This work describes the development of monolithic CMOS active pixel silicon sensors - AstroPix - as a novel technology for use in future gamma-ray telescopes. Based upon sensors (ATLASPix) designed for use in the ATLAS detector at the Large Hadron Collider, AstroPix has the potential to maintain high performance while reducing noise with low power consumption. This is achieved with the dual detection and readout capabilities in each CMOS pixel. The status of AstroPix development and testing, as well as outlook for future testing and application, will be presented.

The TBT project is being developed under ESA's General Studies and Technology Programme (GSTP), and shall implement a test-bed for the validation of an autonomous optical observing system in a realistic scenario within the Space Situational Awareness (SSA) programme of the European Space Agency (ESA). The goal of the project is to provide two fully robotic telescopes, which will serve as prototypes for development of a future network. The system consists of two telescopes, one in Spain and the second one in the Southern Hemisphere. The telescope is a fast astrograph with a large Field of View of 2.5 x 2.5 square-degrees and a plate scale of 2.2 arcsec/pixel. The tube is mounted on a fast direct-drive mount moving with speed up to 20 degrees per second. The focal plane hosts a 2-port 4K x 4K back-illuminated CCD with readout speeds up to 1MHz per port. Detection software and hardware are optimised for the detection of NEOs and objects in high Earth orbits (objects moving from 0.1-40 arcsec/second). Every night it takes all the input needed and prepares a schedule following predefined rules allocating tasks for the telescopes. Telescopes are managed by RTS2 control software, that per

We present new wide field survey strategies for Chilean Large Aperture Telescopes (LAT) measuring the Cosmic Microwave Background (CMB), which we call Sinusoidal Modulated High Cadence Survey Strategies. The strategies were developed during the process of optimizing LAT measurements for the CMB-S4, Simons Observatory, and CCAT-prime collaborations. Observing more than $f_{sky} \sim 0.5$, the telescope consistently achieves high observation efficiency, even with Sun-avoidance enabled. Classical azimuthal scan survey strategies observing fields of equal size suffer from problems of observation depth non-uniformity relative to declination and lack of crosslinking. The new survey strategies described here significantly improve both uniformity and crosslinking while also enabling higher cadence observations for time-domain astrophysics. Uniformity and crosslinking are improved by modulation of azimuthal angular velocity and sinusoidal elevation nods, respectively. In particular, there is nearly uniform observation depth and crosslinking is improved from total lack of crosslinking near -40 degree declination to clearing the strictest thresholds for crosslinking across the entire field. T

Observatory end-to-end science operations is the overall process starting with a scientific question, represented by a proposal requesting observing time, and ending with the analysis of observation data addressing that question, and including all the intermediate steps needed to plan, schedule, obtain, and process these observations. Increasingly complex observing facilities demand a highly efficient science operations approach and at the same time be user friendly to the astronomical user community and enable the highest possible scientific return. Therefore, this process is supported by a collection of tools. In this paper, we describe the overall end-to-end process and its implementation for the three upcoming extremely large telescopes (ELTs), ESO's ELT, the Thirty Meter Telescope (TMT), and the Giant Magellan Telescope (GMT).

Astronomical facilities at the high-altitude observatory Terskol in the Northern Caucasus include optical telescopes with diameters up to 2 m, their instrumentation (high-resolution spectrometers, high-speed photometers, CCDs, etc.), as well as provisions for data distribution via satellite and computer networks. The decades of successful research at Terskol have yielded new data and findings in the following areas of astronomy: discovery and monitoring of NEOs, precise astrometry and photometry of solar system bodies, high-resolution spectroscopy of interstellar clouds, search for optical afterglow of gamma ray bursts, etc. Facilities of the Terskol Observatory are heavily used for the operation of the Synchronous Network of distant Telescopes, which includes optical telescopes at Terskol and at observatories in Bulgaria, Greece, and Ukraine; the remarkable results were obtained especially from synchronous observations of galaxies and flare stars.

Cosmic Microwave Background experiments need to measure polarization properties of the incoming radiation very accurately to achieve their scientific goals. As a result of that, it is necessary to properly characterize these instruments. However, there are not natural sources that can be used for this purpose. For this reason, we developed the PROTOtype CALibrator for Cosmology, PROTOCALC, which is a calibrator source designed for the 90GHz band of these telescopes. This source is purely polarized and the direction of the polarization vector is known with an accuracy better than 0.1deg. This source flew for the first time in May 2022 showing promising result

We have investigated the nature and the origin of the telescopes depicted in three paintings of J. Bruegel the Elder completed between 1609 and 1618. The "tube" that appears in the painting dated 1608-1612 represents a very early dutch spyglass, tentatively attributable to Sacharias Janssen or Lipperhey, prior to those made by Galileo, while the two instruments made of several draw-tubes which appear in the two paintings of 1617 and 1618 are quite sophisticated and may represent early examples of Keplerian telescopes.

Doppler observations of exoplanet systems have been a very expensive technique, mainly due to the high costs of high-resolution stable spectrographs. Recent advances in instrumentation enable affordable Doppler planet detections with surprisingly small optical telescopes. We investigate the possibility of measuring Doppler reflex motion of planet hosting stars with small-aperture telescopes that have traditionally been neglected for this kind of studies. After thoroughly testing the recently developed and commercially available Shelyak eShel echelle spectrograph, we demonstrated that it is routinely possible to achieve velocity precision at the $100 \mathrm{m\,s}^{-1}$ level, reaching down to $\pm 50~\mathrm{m\,s}^{-1}$ for the best cases. We describe our off-the-shelf instrumentation, including a new 0.5m RC telescope at the Gothard Astrophysical Observatory of Loránd Eötvös University equipped with an intermediate resolution fiber-fed echelle spectrograph. We present some follow-up radial velocity measurements of planet hosting stars and point out that updating the orbital solution of Doppler-planets is a very important task that can be fulfilled with sub-meter sized optical tele

Nulling interferometry has been identified as a competitive technique for the detection of extrasolar planets. The technique consists in combining out-of-phase pairs of telescopes to null effectively the light of a bright star an reveal the dim glow of the companion. We have manufactured and tested with monochromatic light an integrated optics component which combines a linear array of 4 telescopes in the nulling mode envisaged by Angel & Wolf (1997). Our testbench simulates the motion of a star in the sky. The tests have demonstrated a nulling scaling as the fourth power of the baseline delay.