Relaying is an effective technique to achieve reliable wireless connectivity in harsh communication environment. However, most of the existing relaying schemes are based on relays with fixed locations, or \emph{static relaying}. In this paper, we consider a novel \emph{mobile relaying} technique, where the relay nodes are assumed to be capable of moving at high speed. Compared to static relaying, mobile relaying offers a new degree of freedom for performance enhancement via careful relay trajectory design. We study the throughput maximization problem in mobile relaying systems by optimizing the source/relay transmit power along with the relay trajectory, subject to practical mobility constraints (on the relay speed and initial/final relay locations), as well as the \emph{information-causality constraint} at the relay owing to its decode-store-and-forward (DSF) strategy. It is shown that for fixed relay trajectory, the throughput-optimal source/relay power allocations over time follow a "staircase" water filling (WF) structure, with \emph{non-increasing} and \emph{non-decreasing} water levels at the source and relay, respectively. On the other hand, with given power allocations, the
The relay channel, consisting of a source-destination pair and a relay, is a fundamental component of cooperative communications. While the capacity of a general relay channel remains unknown, various relaying strategies, including compress-and-forward (CF), have been proposed. For CF, given the correlated signals at the relay and destination, distributed compression techniques, such as Wyner-Ziv coding, can be harnessed to utilize the relay-to-destination link more efficiently. In light of the recent advancements in neural network-based distributed compression, we revisit the relay channel problem, where we integrate a learned one-shot Wyner--Ziv compressor into a primitive relay channel with a finite-capacity and orthogonal (or out-of-band) relay-to-destination link. The resulting neural CF scheme demonstrates that our task-oriented compressor recovers "binning" of the quantized indices at the relay, mimicking the optimal asymptotic CF strategy, although no structure exploiting the knowledge of source statistics was imposed into the design. We show that the proposed neural CF scheme, employing finite order modulation, operates closely to the capacity of a primitive relay channel
Communication over a fully quantum relay channel is considered. We establish three bounds based on different coding strategies, i.e., partial decode-forward, measure-forward, and assist-forward. Using the partial-decode forward strategy, the relay decodes part of the information, while the other part is decoded without the relay's help. The result by Savov et al. (2012) for a classical-quantum relay channel is obtained as a special case. Based on our partial-decode forward bound, the capacity is determined for Hadamard relay channels. In the measure-forward coding scheme, the relay performs a sequence of measurements and then sends a compressed representation of the measurement outcome to the destination receiver. The measure-forward strategy can be viewed as a generalization of the classical compress-forward bound. At last, we consider quantum relay channels with orthogonal receiver components. The assist-forward bound is based on a new approach, whereby the transmitter sends the message to the relay and simultaneously generates entanglement assistance between the relay and the destination receiver. Subsequently, the relay can transmit the message to the destination receiver with
When Masked Diffusion Models (MDMs) generate sequences through iterative refinement, the rich internal computation over masked positions is discarded, forcing every subsequent refinement step to recompute the valuable internal information stored as model representations. To avoid a hard reset between denoising rounds, we propose Learned Relay Representations (Relay), a method that allows MDMs to be forward-thinking when denoising by explicitly learning how to propagate latent information for the benefit of future denoising steps. Relay introduces a differentiable per-token channel that passes information between forward passes and is trained via truncated backpropagation through time (BPTT). We show that this framework can be scaled to state-of-the-art Diffusion Language Models (DLMs), and is seamlessly compatible with techniques like block diffusion and KV caching. We first provide a thorough justification of the design choices in Relay on a challenging Sudoku-based planning task. We then scale Relay to Fast-dLLM v2, a state-of-the-art DLM, outperforming standard supervised finetuning on coding tasks while reducing inference latency by up to 32%. Our empirical results demonstrate
In this paper, a cooperative relay network consisting of a single-antenna source, a multi-antenna relay, and a multi-antenna destination is considered. The relay operates in decode-and-forward (DF) mode under frequency-selective fading. To combat intersymbol interference (ISI), single-carrier frequency-domain equalization (SC-FDE) with or without decision feedback is deployed at the relay and the destination. The equalization coefficients are obtained using minimum mean squared error (MMSE) criterion. Both equal and optimum power allocations for a constant total transmit power at the relay are considered. While, the optimum power allocation is a non-convex problem, the solution is obtained using strong duality.
The relay channel with unreliable helper is introduced and studied. The model is that of a classical relay channel where the input from the relay to the channel has an extra primitive link whose presence is not assured a priori. The extra link represents a helper who may decide not to cooperate in transmission. The goal is to devise robust coding schemes that exploit all the relay links when they are present, but can also operate, possibly at reduced rates, when the extra primitive link (helper) is absent. The capacity region of this class of problems is defined, and fully characterized for degraded relay channels. The degraded Gaussian relay channel with unreliable relay link is solved.
Relay selection is considered to enhance the secrecy of a dual-hop regenerative multi-relay system with an eavesdropper. Without assuming perfect decoding at the relays, the secrecy outage probability of a single relay system is obtained first. Secrecy outage of optimal, traditional and suboptimal relay selection schemes is then evaluated. To reduce the power consumption, partial relay selection schemes based only on either of the source-relay or relay-destination instantaneous channel state information (ICSI) are introduced. Its secrecy outage is evaluated and compared with the other schemes. Secrecy outage of all the selection schemes are obtained in closed-form. An optimal relay selection scheme is proposed using secrecy outage which does not require any ICSI. Asymptotic and diversity gain analysis of the secrecy outage is presented when source-relay and relay-destination average SNRs are same or different. We observe that the improvement in eavesdropper link quality affects the secrecy outage more when required secrecy rate is low as compared to the case when rate is high. We also observe that relay selection improves performance more when number of relays are more. It is impor
In this paper, we investigate the two-hop full-duplex (FD) relay channel with self-interference and fading, which is comprised of a source, an FD relay, and a destination, where a direct source-destination link does not exist and the FD relay is impaired by self-interference. For this channel, we propose three buffer-aided relaying schemes with adaptive reception-transmission at the FD relay for the cases when the source and the relay both perform adaptive-power allocation, fixed-power allocation, and fixed-rate transmission, respectively. The proposed buffer-aided relaying schemes significantly improve the achievable rate and the throughput of the considered relay channel by enabling the FD relay to adaptively select to either receive, transmit, or simultaneously receive and transmit in a given time slot based on the qualities of the receiving, transmitting, and self-interference channels. Our numerical results show that significant performance gains are achieved using the proposed buffer-aided relaying schemes compared to conventional FD relaying, where the FD relay is forced to always simultaneously receive and transmit, and to buffer-aided half-duplex relaying, where the half-d
In this paper, we study virtual full-duplex (FD) buffer-aided relaying to recover the loss of multiplexing gain caused by half-duplex (HD) relaying in a multiple relay network, where each relay is equipped with a buffer and multiple antennas, through joint opportunistic relay selection (RS) and beamforming (BF) design. The main idea of virtual FD buffer-aided relaying is that the source and one of the relays simultaneously transmit their own information to another relay and the destination, respectively. In such networks, inter-relay interference (IRI) is a crucial problem which has to be resolved like self-interference in the FD relaying. In contrast to previous work that neglected IRI, we propose joint RS and BF schemes taking IRI into consideration by using multiple antennas at the relays. In order to maximize average end-to-end rate, we propose a weighted sum-rate maximization strategy assuming that adaptive rate transmission is employed in both the source to relay and relay to destination links. Then, we propose several BF schemes cancelling or suppressing IRI in order to maximize the weighted sum-rate. Numerical results show that our proposed optimal, zero forcing, and minimu
In this paper, we consider the design of joint network coding (NC)and relay selection (RS) in two-way relay channels. In the proposed schemes, two users first sequentially broadcast their respective information to all the relays. We propose two RS schemes, a single relay selection with NC and a dual relay selection with NC. For both schemes, the selected relay(s) perform NC on the received signals sent from the two users and forward them to both users. The proposed schemes are analyzed and the exact bit error rate (BER) expressions are derived and verified through Monte Carlo simulations. It is shown that the dual relay selection with NC outperforms other considered relay selection schemes in two-way relay channels. The results also reveal that the proposed NC relay selection schemes provide a selection gain compared to a NC scheme with no relay selection, and a network coding gain relative to a conventional relay selection scheme with no NC.
In this work, the achievable rate of three-node relay systems with selection relaying under statistical delay constraints, imposed on the limitations of the maximum end-to-end delay violation probabilities, is investigated. It is assumed that there are queues of infinite size at both the source and relay node, and the source can select the relay or destination for data reception. Given selection relaying policy, the effective bandwidth of the arrival processes of the queue at the relay is derived. Then, the maximum constant arrival rate can be identified as the maximum effective capacity as a function of the statistical end-to-end queueing delay constraints, signal-to-noise ratios (SNR) at the source and relay, the fading distributions of the links, and the relay policy. Subsequently, a relay policy that incorporates the statistical delay constraints is proposed. It is shown that the proposed relay policy can achieve better performance than existing protocols. Moreover, it is demonstrated that buffering relay model can still help improve the throughput of relay systems in the presence of statistical delay constraints and source-destination link.
In this paper, we re-examine the relay channel under the decode-forward (DF) strategy. Contrary to the established belief that block Markov coding is always the rate-optimal DF strategy, under certain channel conditions (a link regime), independent signaling between the source and relay achieves the same transmission rate without requiring coherent channel phase information. Further, this independent signaling regime allows the relay to conserve power. As such, we design a composite DF relaying strategy that achieves the same rate as block Markov DF but with less required relay power. The finding is attractive from the link adaptation perspective to adapt relay coding and relay power according to the link state. We examine this link adaptation in fading under both perfect channel state information (CSI) and practical CSI, in which nodes have perfect receive and long-term transmit CSI, and derive the corresponding relay power savings in both cases. We also derive the outage probability of the composite relaying scheme which adapts the signaling to the link regime. Through simulation, we expose a novel trade-off for relay placement showing that the relay conserves the most power when
We consider the communication scenario where a source-destination pair wishes to keep the information secret from a relay node despite wanting to enlist its help. For this scenario, an interesting question is whether the relay node should be deployed at all. That is, whether cooperation with an untrusted relay node can ever be beneficial. We first provide an achievable secrecy rate for the general untrusted relay channel, and proceed to investigate this question for two types of relay networks with orthogonal components. For the first model, there is an orthogonal link from the source to the relay. For the second model, there is an orthogonal link from the relay to the destination. For the first model, we find the equivocation capacity region and show that answer is negative. In contrast, for the second model, we find that the answer is positive. Specifically, we show by means of the achievable secrecy rate based on compress-and-forward, that, by asking the untrusted relay node to relay information, we can achieve a higher secrecy rate than just treating the relay as an eavesdropper. For a special class of the second model, where the relay is not interfering itself, we derive an up
Apple AirTags use Apple's Find My network: when nearby iDevices detect a lost tag, they anonymously forward an encrypted location report to Apple, which the tag's owner can then fetch to locate the item. That encryption protects privacy -- neither the finder nor Apple learns the owner's identity -- but it also prevents Apple from validating the correctness of received reports. We show that this design weakness can be exploited: using a relay attack, we can inject manipulated location reports so the Find My service reports a false position for a lost AirTag. The same technique can be used to deny recovery of a targeted tag (a focused DoS), since the owner is misled about its whereabouts.
In this paper, we study the two-way relay channel with energy harvesting nodes. In particular, we find transmission policies that maximize the sum-throughput for two-way relay channels when the relay does not employ a data buffer. The relay can perform decode-and-forward, compress-and-forward, compute-and-forward or amplify-and-forward relaying. Furthermore, we consider throughput improvement by dynamically choosing relaying strategies, resulting in hybrid relaying strategies. We show that an iterative generalized directional water-filling algorithm solves the offline throughput maximization problem, with the achievable sum-rate from an individual or hybrid relaying scheme. In addition to the optimum offline policy, we obtain the optimum online policy via dynamic programming. We provide numerical results for each relaying scheme to support the analytic findings, pointing out to the advantage of adapting the instantaneous relaying strategy to the available harvested energy.
A new, fair relay selection scheme is proposed for a dual-hop decode-and-forward network with randomly-distributed relays. Most of the reported works in the literature achieve fairness at the expense of degrading the outage probability performance. In addition, they often assume that the number and locations of the relays are known. In contrast, the proposed scheme achieves fairness in a random field of relays without deteriorating the outage probability performance. In this scheme, each relay maintains a countdown timer whose initial value is a function of the relay location and a tunable parameter which controls the level of fairness. The optimum value of this parameter is evaluated in an offline manner so as to achieve fairness by making the average powers consumed by the relays as close as possible. An exact analytical expression is derived for the average power consumed by each relay. This expression is then used to show the superiority of the proposed scheme over opportunistic relaying and random relay selection schemes.
This paper studies incremental relay strategies for a two-user Gaussian relay-interference channel with an in-band-reception and out-of-band-transmission relay, where the link between the relay and the two receivers is modelled as a degraded broadcast channel. It is shown that generalized hash-and-forward (GHF) can achieve the capacity region of this channel to within a constant number of bits in a certain weak relay regime, where the transmitter-to-relay link gains are not unboundedly stronger than the interference links between the transmitters and the receivers. The GHF relaying strategy is ideally suited for the broadcasting relay because it can be implemented in an incremental fashion, i.e., the relay message to one receiver is a degraded version of the message to the other receiver. A generalized-degree-of-freedom (GDoF) analysis in the high signal-to-noise ratio (SNR) regime reveals that in the symmetric channel setting, each common relay bit can improve the sum rate roughly by either one bit or two bits asymptotically depending on the operating regime, and the rate gain can be interpreted as coming solely from the improvement of the common message rates, or alternatively in
This paper studies the noncausal relay channel, also known as the relay channel with unlimited lookahead, introduced by El Gamal, Hassanpour, and Mammen. Unlike the standard relay channel model, where the relay encodes its signal based on the previous received output symbols, the relay in the noncausal relay channel encodes its signal as a function of the entire received sequence. In the existing coding schemes, the relay uses this noncausal information solely to recover the transmitted message and then cooperates with the sender to communicate this message to the receiver. However, it is shown in this paper that by applying the Gelfand--Pinsker coding scheme, the relay can take further advantage of the noncausally available information, which can achieve strictly higher rates than existing coding schemes. This paper also provides a new upper bound on the capacity of the noncausal relay that strictly improves upon the cutset bound. These new lower and upper bounds on the capacity coincide for the class of degraded noncausal relay channels and establish the capacity for this class.
This study investigates wireless information and energy transfer for dual-hop amplify-and-forward full-duplex relaying systems. By forming energy efficiency (EE) maximization problem into a concave fractional program of transmission power, three relay control schemes are separately designed to enable energy harvesting and full-duplex information relaying. With Rician fading modeled residual self-interference channel, analytical expressions of outage probability and ergodic capacity are presented for the maximum relay, signal-to-interference-plus-noise-ratio (SINR) relay, and target relay. It has shown that EE maximization problem of the maximum relay is concave for time switching factor, so that bisection method has been applied to obtain the optimized value. By incorporating instantaneous channel information, the SINR relay with collateral time switching factor achieves an improved EE over the maximum relay in delay-limited and delay-tolerant transmissions. Without requiring channel information for the second-hop, the target relay ensures a competitive performance for outage probability, ergodic capacity, and EE. Comparing to the direct source-destination transmission, numerical r
We explore the SNR-optimal relay functionality in a \emph{memoryless} relay network, i.e. a network where, during each channel use, the signal transmitted by a relay depends only on the last received symbol at that relay. We develop a generalized notion of SNR for the class of memoryless relay functions. The solution to the generalized SNR optimization problem leads to the novel concept of minimum mean square uncorrelated error estimation(MMSUEE). For the elemental case of a single relay, we show that MMSUEE is the SNR-optimal memoryless relay function regardless of the source and relay transmit power, and the modulation scheme. This scheme, that we call estimate and forward (EF), is also shown to be SNR-optimal with PSK modulation in a parallel relay network. We demonstrate that EF performs better than the best of amplify and forward (AF) and demodulate and forward (DF), in both parallel and serial relay networks. We also determine that AF is near-optimal at low transmit power in a parallel network, while DF is near-optimal at high transmit power in a serial network. For hybrid networks that contain both serial and parallel elements, and when robust performance is desired, the adv