We propose a couple of novel tools for benchmarking optimization algorithms which possibly converge to different solutions on a test set: the quality profiles and the test set profiles. Their aim is to assess and compare algorithms in terms of quality (i.e. value of the objective function) of the obtained solutions, as well as to assess the consistency of the test set. A key distinguishing feature of the quality profiles we propose is its comparative deterministic procedure that emphasizes the accuracy of the solution, rather than the computational burden of solvers. In this regard, several test set--dependent approaches for both comparing and ranking algorithms have already been proposed in the literature, representing widely used benchmarking procedures. We believe that the joint use of such procedures, along with the novel quality profiles detailed here, should enhance the benchmarking process, in all those cases where the comparison encompasses exact methods as well as heuristics. Moreover, the literature on numerical optimization seems to have paid less attention, in the last decade, to determining how appropriate a test set used for benchmarking the selected solvers may be. T
Mission profiles cover the conditions that a component, e.g., an electronic component of a vehicle, is exposed to during its lifecycle. Currently, these profiles typically provide descriptive summaries, such as histograms, of single stress parameters like temperature, humidity, or voltage. This is highly aggregated information. New requirements for electric and autonomous driving cars require much more information how applications are used. In this work, we present a new approach for mission profiles which contains detailed usage information. We suggest a functional description over time, which allows joint modeling of various characteristics such as temperature, humidity, and voltage. The entire lifecycle history is covered, and the method can control the temporal resolution, i.e., the level of details of a mission profile. As a result, more accurate mission profiles can be generated, user quantiles can be derived, and usage outliers can be identified. This model establishes a framework to exchange usage data between suppliers, original equipment manufacturers (OEMs), and end customers while data integrity and protection are assured.
We present radial profiles of surface brightness in UV and IR bands, estimate stellar mass surface density ($Σ_\star$) and star formation rate surface density ($Σ_\mathrm{SFR}$), and predict the CO-to-H$_2$ conversion factor ($α_\mathrm{CO}$) for over 5,000 local galaxies with stellar mass $M_\star\,{\geq}\,10^{9.3}\rm\,M_\odot$. We build these profiles and measure galaxy half-light radii using GALEX and WISE images from the $z$0MGS program, with special care given to highly inclined galaxies. From the UV and IR surface brightness profiles, we estimate $Σ_\star$ and $Σ_\mathrm{SFR}$ and use them to predict $α_\mathrm{CO}$ with state-of-the-art empirical prescriptions. We validate our (kpc-scale) $α_\mathrm{CO}$ predictions against observational estimates, finding the best agreement when accounting for CO-dark gas as well as CO emissivity and excitation effects. The CO-dark correction plays a primary role in lower-mass galaxies, whereas CO emissivity and excitation effects become more important in higher-mass and more actively star-forming galaxies, respectively. We compare our estimated $α_\mathrm{CO}$ to observed galaxy-integrated SFR to CO luminosity ratio as a function of $M_\st
Pulsar polarization profiles are very basic database for understanding the emission processes in pulsar magnetosphere. After careful polarization calibration of the 19-beam L-band receiver and verification of beam-offset observation results, we obtain polarization profiles of 682 pulsars from observations by the Five-hundred-meter Aperture Spherical radio Telescope (FAST) during the survey tests for the Galactic Plan Pulsar Snapshot (GPPS) survey and other normal FAST projects. Among them, polarization profiles of about 460 pulsars are observed for the first time. The profiles exhibit diverse features. Some pulsars have a polarization position angle curve with a good S-shaped swing, and some with orthogonal modes; some have components with highly linearly components or strong circularly polarized components; some have a very wide profile, coming from an aligned rotator, and some have an interpulse from a perpendicular rotator; some wide profiles are caused by interstellar scattering. We derive geometry parameters for 190 pulsars from the S-shaped position angle curves or with orthogonal modes. We find that the linear and circular polarization or the widths of pulse profiles have va
Data aggregators collect large amount of information about individual users and create detailed online behavioral profiles of individuals. Behavioral profiles benefit users by improving products and services. However, they have also raised concerns regarding user privacy, transparency of collection practices and accuracy of data in the profiles. To improve transparency, some companies are allowing users to access their behavioral profiles. In this work, we investigated behavioral profiles of users by utilizing these access mechanisms. Using in-person interviews (n=8), we analyzed the data shown in the profiles, elicited user concerns, and estimated accuracy of profiles. We confirmed our interview findings via an online survey (n=100). To assess the claim of improving transparency, we compared data shown in profiles with the data that companies have about users. More than 70% of the participants expressed concerns about collection of sensitive data such as credit and health information, level of detail and how their data may be used. We found a large gap between the data shown in profiles and the data possessed by companies. A large number of profiles were inaccurate with as much as
We present an analysis of major-axis surface-brightness profiles of bars in a volume-limited sample of 182 barred spiral galaxies, using Spitzer 3.6 micron images. Unlike most previous studies, we use the entire bar profile, and we classify profiles into four categories. These are "Peak+Shoulders" (P+Sh) -- updating the classic "flat bar" profile -- and three subtypes of the classic "exponential" profile: (true) Exponential, "Two-Slope" (shallow inner slope + steeper outer slope), and "Flat-Top" (constant inner region, steep outer slope). P+Sh profiles are preferentially found in galaxies with high stellar masses, early Hubble types, red colours, and low gas fractions; the most significant factor is stellar mass, and previous correlations with Hubble type can be explained by the tendency of higher-mass galaxies to have earlier Hubble types. The most common type of non-P+Sh profile is Exponential, followed by Flat-Top profiles; all non-P+Sh profiles appear to have similar distributions of stellar mass, Hubble type, colour, and gas fraction. We also morphologically classify the bars of an inclined subsample into those with and without boxy/peanut-shaped (B/P) bulges; as previously re
The description of chemical processes at the molecular level is often facilitated by use of reaction coordinates, or collective variables (CVs). The CV measures the progress of the reaction and allows the construction of profiles that track the evolution of a specific property as the reaction progresses. Whereas CVs are routinely used, especially alongside enhanced sampling techniques, links between profiles and thermodynamic state functions and reaction rate constants are not rigorously exploited. Here, we report a unified treatment of such reaction profiles. Tractable expressions are derived for the free-energy, internal-energy, and entropy profiles as functions of only the CV.We demonstrate the ability of this treatment to extract quantitative insight from the entropy and internal-energy profiles of various real-world physicochemical processes, including intramolecular organic reactions, ionic transport in superionic electrolytes, and molecular transport in nanoporous materials.
Finite-difference WENO schemes are capable of approximating accurately and efficiently weak solutions of hyperbolic conservation laws. In this context high order numerical boundary conditions have been proven to increase significantly the resolution of the numerical solutions. In this paper a finite-difference WENO scheme is combined with a high order boundary extrapolation technique at ghost cells to solve problems involving NACA airfoil profiles. The results obtained are comparable with those obtained through other techniques involving unstructured meshes.
Online social networks (OSNs) are abused by cyber criminals for various malicious activities. One of the most effective approaches for detecting malicious activity in OSNs involves the use of social network honeypots - artificial profiles that are deliberately planted within OSNs in order to attract abusers. Honeypot profiles have been used in detecting spammers, potential cyber attackers, and advanced attackers. Therefore, there is a growing need for the ability to reliably generate realistic artificial honeypot profiles in OSNs. In this research we present 'ProfileGen' - a method for the automated generation of profiles for professional social networks, giving particular attention to producing realistic education and employment records. 'ProfileGen' creates honeypot profiles that are similar to actual data by extrapolating the characteristics and properties of real data items. Evaluation by 70 domain experts confirms the method's ability to generate realistic artificial profiles that are indistinguishable from real profiles, demonstrating that our method can be applied to generate realistic artificial profiles for a wide range of applications.
The surface-brightness profiles of galaxies I(R) and the density profiles of dark-matter halos rho(r) are well represented by the same analytic function, named after either Sérsic, I~exp[-(R/R*)^(1/m)], or Einasto, rho~[exp[-(r/r*)^alpha], where R* and r* are characteristic radii. Systems with high Sérsic index m (or low Einasto index alpha) have steep central profiles and shallow outer profiles, while systems with low m (or high alpha) have shallow central profiles and steep profiles in the outskirts. We present the results of idealized numerical experiments which suggest that the origin of these profiles can be traced back to the initial density fluctuation field: high-alpha (low-m) systems form in smooth regions via few mergers, while low-alpha (high-m) systems form in clumpy regions via several mergers.
While the Sersic profile family provide adequate fits for the surface brightness profiles of observed galaxies, the physical origin is unknown. We show that, if the cosmological density field are seeded by random gaussian fluctuations, as in the standard cold dark matter model, galaxies with steep central profiles have simultaneously extended envelopes of shallow profiles in the outskirts, whereas galaxies with shallow central profiles are accompanied by steep density profiles in the outskirts. These properties are in accord with those of the Sersic profile family. Moreover, galaxies with steep central profiles form their central regions in smaller denser subunits that possibly merge subsequently, which naturally leads to formation of bulges. In contrast, galaxies with shallow central profiles form their central regions in a coherent fashion without significant substructure, a necessary condition for disk galaxy formation. Thus, the scenario is self-consistent with respect to the correlation between observed galaxy morphology and Sersic index. We predict further that clusters of galaxies should display a similar trend, which should be verifiable observationally.
Matching the rail cross-section profiles measured on site with the designed profile is a must to evaluate the wear of the rail, which is very important for track maintenance and rail safety. So far, the measured rail profiles to be matched usually have four features, that is, large amount of data, diverse section shapes, hardware made errors, and human experience needs to be introduced to solve the complex situation on site during matching process. However, traditional matching methods based on feature points or feature lines could no longer meet the requirements. To this end, we first establish the rail profiles matching dataset composed of 46386 pairs of professional manual matched data, then propose a general high-precision method for rail profiles matching using pre-trained convolutional neural network (CNN). This new method based on deep learning is promising to be the dominant approach for this issue. Source code is at https://github.com/Kunqi1994/Deep-learning-on-rail-profile-matching.
We use N-body simulations to study the shape of mean cluster density and velocity profiles formed via gravitational instability. The dependence of the final structure on both cosmology and initial density field is examined, using a grid of cosmologies and scale-free initial power spectra P\propto k^n. For each model, we stack clusters to define an average density profile in the non-linear regime. The profiles are well fit by a power law over 99% of the cluster volume, with a clear trend toward steeper slopes with both increasing n and decreasing Omega_o. For models with a Omega_o = 0.2, the profile slopes are consistently higher than those for Omega-1.0. Cluster density profiles are thus potentially useful cosmological diagnostics. We find no evidence for a constant density core in any of the models, although the density profiles do tend to flatten at small radii. Much of the flattening is due to the force softening required by the simulations, and an attempt is made to recover the unsoftened profiles assuming angular momentum invariance. The recovered profiles in the Omega=1 cosmologies are consistent with a pure power law up to the highest density contrasts (10^6) accessible with
We present a study of the broad optical/UV emission line profiles in AGN (active galactic nuclei) to get information on the dominant velocity components (turbulence, rotation, etc.) in the central broad-line region (BLR). We introduce line broadening simulations of emission line profiles and compare these results with the largest homogeneous data set of reverberation-mapped AGN. The underlying broad-line profiles in AGN are Lorentzian profiles caused by turbulence in the line emitting region. The turbulent velocities are different for the different line emitting regions of Ha, Hg, Lya, CIII] 1909, He II 1640, and Si IV 1400. The turbulent velocities go from 400 km/s for Hb up to 3,800 km/s for Lya+Nv 1240. The dominating broadening mechanism of these profiles is broadening due to rotation. The rotation velocities causing the line profile broadening go from 500 km/s up to 6,500 km/s. Here we present interrelations between observed emission line widths (FWHM) and their related rotational velocities to correct for the contribution of the turbulence to the broad-line profiles.
We report results from the analysis of 21 nearby galaxy clusters, 11 with cooling flow (CF) and 10 without cooling flow, observed with BeppoSAX. The temperature profiles of both CF and non-CF systems are characterized by an isothermal core extending out to 0.2 r_180; beyond this radius both CF and non-CF cluster profiles rapidly decline. Our results differ from those derived by other authors who either found continuously declining profiles or substantially flat profiles. Neither the CF nor the non-CF profiles can be modeled by a polytropic temperature profile, the reason being that the radius at which the profiles break is much larger than the core radius characterizing the gas density profiles. For r > 0.2 r_180, where the gas can be treated as a polytrope, the polytropic indices derived for CF and non-CF systems are respectively 1.20 +/- 0.06 and 1.46 +/- 0.06. The former index is closer to the isothermal value, 1, and the latter to the adiabatic value, 5/3. Published hydrodynamic simulations do not reproduce the peculiar shape of the observed temperature profile, probably suggesting that a fundamental ingredient is missing.
We investigate the dark matter profile of the Milky Way using the observed rotation curve data out to 100 kpc. The baryonic matter of the Milky Way is divided into bulge, disk and gas components, and each component is modelled using various possible mass profiles available in literature. The arbitrary combination of seven bulge profiles, four disk profiles and two gas profiles results in fifty-six baryon models. These baryon models are combined with one of the four dark matter profiles: Burkert profile, core-modified profile, pseudo-isothermal profile and NFW profile, to fit the observed rotation curve data. Results show that in general the NFW profile fits the data better than the Burkert profile, while the core-modified profile and the pseudo-isothermal profile are essentially ruled out. The best-fitting NFW model has the scale length $r_0=8.1\pm 0.7$ kpc, and the corresponding local density of dark matter is $ρ_{\rm dm}(R=R_\odot)=0.51\pm0.09~{\rm GeV}/{\rm cm}^3$.
Numerical simulations of blood flow are a valuable tool to investigate the pathophysiology of ascending thoracic aortic aneurysms (ATAA). To accurately reproduce hemodynamics, computational fluid dynamics (CFD) models must employ realistic inflow boundary conditions (BCs). However, the limited availability of in vivo velocity measurements still makes researchers resort to idealized BCs. In this study we generated and thoroughly characterized a large dataset of synthetic 4D aortic velocity profiles suitable to be used as BCs for CFD simulations. 4D flow MRI scans of 30 subjects with ATAA were processed to extract cross-sectional planes along the ascending aorta, ensuring spatial alignment among all planes and interpolating all velocity fields to a reference configuration. Velocity profiles of the clinical cohort were extensively characterized by computing flow morphology descriptors of both spatial and temporal features. By exploiting principal component analysis (PCA), a statistical shape model (SSM) of 4D aortic velocity profiles was built and a dataset of 437 synthetic cases with realistic properties was generated. Comparison between clinical and synthetic datasets showed that th
The warm absorbers observed in more than half of all nearby active galactic nuclei (AGN) are tracers of ionized outflows located at parsec scale distances from the central engine. If the smallest inferred ionization parameters correspond to plasma at a few $10^4$~K, then the gas undergoes a transition from being bound to unbound provided it is further heated to $\sim 10^6$~K at larger radii. Dannen et al. recently discovered that under these circumstances, thermally driven wind solutions are unsteady and even show very dense clumps due to thermal instability. To explore the observational consequences of these new wind solutions, we compute line profiles based on the one-dimensional simulations of Dannen et al. We show how the line profiles from even a simple steady state wind solution depend on the ionization energy (IE) of absorbing ions, which is a reflection of the wind ionization stratification. To organize the diversity of the line shapes, we group them into four categories: weak Gaussians, saturated boxy profiles with and without an extended blue wing, and broad weak profiles. The lines with profiles in the last two categories are produced by ions with the highest IE that pro
As organizations increasingly rely on professionally oriented networks such as LinkedIn (the largest such social network) for building business connections, there is increasing value in having one's profile noticed within the network. As this value increases, so does the temptation to misuse the network for unethical purposes. Fake profiles have an adverse effect on the trustworthiness of the network as a whole, and can represent significant costs in time and effort in building a connection based on fake information. Unfortunately, fake profiles are difficult to identify. Approaches have been proposed for some social networks; however, these generally rely on data that are not publicly available for LinkedIn profiles. In this research, we identify the minimal set of profile data necessary for identifying fake profiles in LinkedIn, and propose an appropriate data mining approach for fake profile identification. We demonstrate that, even with limited profile data, our approach can identify fake profiles with 87% accuracy and 94% True Negative Rate, which is comparable to the results obtained based on larger data sets and more expansive profile information. Further, when compared to a
We have compiled a pseudo-snapshot data set of two-colour observations from the Hubble Space Telescope archive for a sample of 53 rich LMC clusters with ages 10^6-10^10 yr. We present surface brightness profiles for the entire sample, and derive structural parameters for each cluster, including core radii, and luminosity and mass estimates. Because we expect the results presented here to form the basis for several further projects, we describe in detail the data reduction and surface brightness profile construction processes, and compare our results with those of previous ground-based studies. The surface brightness profiles show a large amount of detail, including irregularities in the profiles of young clusters (such as bumps, dips, and sharp shoulders), and evidence for both double clusters and post core-collapse (PCC) clusters. In particular we find power-law profiles in the inner regions of several candidate PCC clusters, with slopes of approximately -0.7, but showing considerable variation. We estimate that 20 +/- 7 % of the old cluster population of the LMC has entered PCC evolution, a similar fraction to that for the Galactic globular cluster system. In addition, we examine