搜索结果：pressure

Diamond quantum sensors offer high precision and spatial resolution as magnetic probes, making them promising for a wide range of applications. While diamond anvil cells (DACs) can generate extremely high pressures, techniques for magnetometry under such conditions remain limited. By fabricating an ensemble of NV centers directly on the anvil diamond surface, we enable precise magnetic measurements under high pressure. In this work, we employ this NV ensemble to image the stray magnetic field of iron up to 30 GPa, enabling the observation of the magnetic transition ($α$-$\varepsilon$ transition) in iron.

Current multi-agent LLM frameworks rely on explicit orchestration patterns borrowed from human organizational structures: planners delegate to executors, managers coordinate workers, and hierarchical control flow governs agent interactions. These approaches suffer from coordination overhead that scales poorly with agent count and task complexity. We propose a fundamentally different paradigm inspired by natural coordination mechanisms: agents operate locally on a shared artifact, guided only by pressure gradients derived from measurable quality signals, with temporal decay preventing premature convergence. We formalize this as optimization over a pressure landscape and prove convergence guarantees under mild conditions. Empirically, on meeting room scheduling across 1,350 trials, pressure-field coordination outperforms all baselines: 48.5% aggregate solve rate versus 12.6% for conversation-based coordination, 1.5% for hierarchical control, and 0.4% for sequential and random baselines (all pairwise comparisons p < 0.001). Temporal decay is essential: disabling it reduces solve rate by 10 percentage points. On easy problems, pressure-field achieves 86.7% solve rate. The approach m

We report the fabrication and characterization of a Zr-based bulk metallic glass (Zr-BMG) clamp cell designed for high-pressure inelastic neutron scattering (INS) measurements. The INS spectra of the empty cell exhibit broad and featureless backgrounds, reflecting the amorphous structure of the Zr-BMG. Test measurements using a reference sample, CsFeCl$_{3}$, confirm that the neutron transmission of the Zr-BMG cell is significantly higher than that of a conventional monobloc CuBe clamp cell. These results demonstrate that the Zr-BMG clamp cell provides both enhanced neutron transparency and a clean background profile, thereby advancing high-pressure INS studies.

We investigated the non centrosymmetric superconductors CePt$_3$Si and UIr by the ac heat capacity measurement under pressures. We determined the pressure phase diagrams of these compounds. In CePt$_3$Si, the Néel temperature $T_{\rm N}$ = 2.2 K decreases with increasing pressure and becomes zero at the critical pressure $P_{\rm AF}$ $\simeq$ 0.6 GPa. On the other hand, the superconducting phase exists in a wider pressure region from ambient pressure to $P_{\rm AF}$ $\simeq$ 1.5 GPa. The phase diagram of CePt$_3$Si is very unique and has never been reported before for other heavy fermion superconductors. In UIr, the heat capacity shows an anomaly at the Curie temperature $T_{\rm C1}$ = 46 K at ambient pressure, and the heat capacity anomaly shifts to lower temperatures with increasing pressure. The present pressure dependence of $T_{\rm C1}$ was consistent with the previous studies by the resistivity and magnetization measurements. Previous ac magnetic susceptibility and resistivity measurements suggested the existence of three ferromagnetic phases, FM1-3. $C_{\rm ac}$ shows a bending structure at 1.98, 2.21, and 2.40 GPa .The temperatures where these anomalies are observed are clo

We investigate the dynamical instability of a self-gravitating thermal system in the quantum regime, where Fermi degeneracy pressure becomes significant. Using a truncated Fermi-Dirac distribution and solving the Tolman-Oppenheimer-Volkoff equation, we identify marginally stable configurations following Chandrasekhar's criterion. While Fermi pressure stabilizes a system against gravitational collapse in Newtonian gravity, in general relativity it can instead drive the instability, enabling collapse even at low temperatures. In the low-temperature limit, the critical mass is independent of the boundary temperature. We discuss implications for the formation of massive black holes in the early Universe through the gravothermal collapse of dark matter.

High-pressure superconductivity in a rare-earth doped Ca0.86Pr0.14Fe2As2 single crystalline sample has been studied up to 12 GPa and temperatures down to 11 K using designer diamond anvil cell under a quasi-hydrostatic pressure medium. The electrical resistance measurements were complemented by high pressure and low temperature x-ray diffraction studies at a synchrotron source. The electrical resistance measurements show an intriguing observation of superconductivity under pressure, with Tc as high as ~51 K at 1.9 GPa, presenting the highest Tc reported in the intermetallic class of 1-2-2 iron-based superconductors. The resistive transition observed suggests a possible existence of two superconducting phases at low pressures of 0.5 GPa: one phase starting at Tc1 ~48 K, and the other starting at Tc2~16 K. The two superconducting transitions show distinct variations with increasing pressure. High pressure low temperature structural studies indicate that the superconducting phase is a collapsed tetragonal ThCr2Si2-type (122) crystal structure. Our high pressure studies indicate that high Tc state attributed to non-bulk superconductivity in rare-earth doped 1-2-2 iron-based superconduc

The pressure-dependence of the hidden order phase transition of URu2Si2 is shown to depend sensitively upon the quality of hydrostatic pressure conditions during electrical resistivity measurements. Hysteresis in pressure is demonstrated for two choices of pressure medium: the commonly-used mixture of 1:1 Fluorinert FC70/FC77 and pure FC75. In contrast, no hysteresis is observed when the pressure medium is a 1:1 mixture of n-pentane/isoamyl alcohol, as it remains hydrostatic over the entire studied pressure range. Possible ramifications for the interpretation of the temperature-pressure phase diagram of URu2Si2 are discussed.

A low background double-wall piston-cylinder-type pressure cell is developed at the Paul Scherrer Institute. The cell is made from BERLYCO-25 (beryllium copper) and MP35N nonmagnetic alloys with the design and dimensions which are specifically adapted to muon-spin rotation/relaxation (muSR) measurements. The mechanical design and performance of the pressure cell are evaluated using finite-element analysis (FEA). By including the measured stress-strain characteristics of the material into the finite-element model, the cell dimensions are optimized with the aim to reach the highest possible pressure while maintaining the sample space large (6 mm in diameter and 12 mm high). The presented unconventional design of the double-wall piston-cylinder pressure cell with a harder outer MP35N sleeve and asofter inner CuBe cylinder enables pressures of up to 2.6 GPa to be reached at ambient temperatures, corresponding to 2.2 GPa at low temperatures without any irreversible damage to the pressure cell. The nature of the muon stopping distribution, mainly in the sample and in the CuBe cylinder, results in a low-background muSR signal.

Human can be distinguished by different limb movements and unique ground reaction force. Cumulative foot pressure image is a 2-D cumulative ground reaction force during one gait cycle. Although it contains pressure spatial distribution information and pressure temporal distribution information, it suffers from several problems including different shoes and noise, when putting it into practice as a new biometric for pedestrian identification. In this paper, we propose a hierarchical translation-invariant representation for cumulative foot pressure images, inspired by the success of Convolutional deep belief network for digital classification. Key contribution in our approach is discriminative hierarchical sparse coding scheme which helps to learn useful discriminative high-level visual features. Based on the feature representation of cumulative foot pressure images, we develop a pedestrian recognition system which is invariant to three different shoes and slight local shape change. Experiments are conducted on a proposed open dataset that contains more than 2800 cumulative foot pressure images from 118 subjects. Evaluations suggest the effectiveness of the proposed method and the po

We discuss the use of commercial high-power light emitting diodes (LEDs) as a light source for fluorescence pressure measurements. A relatively broad light emitting spectra of single color LEDs (in comparison with lasers) do not prevent producing narrow fluorescence lines at least for two widely used pressure indicator materials, namely ruby (Cr$^{3+}$:Al$_2$O$_3$) and strontium tetraborate (Sm$^{2+}$:SrB$_4$O$_7$). Strongest responses of both pressure indicators were detected for the green color LEDs with the average wavelength $λ_{\rm av}\sim 530$ nm. LEDs might be easily implemented for producing fiber coupled, as well as the parallel light sources. LEDs were found to be efficient to replace laser sources in piston-cylinder cell and diamond anvil cell fluorescence pressure measurement setups.

Motivated by unexpected reports of a 26 K superconducting transition in elemental titanium at high pressure, we carry out an accurate ab-initio study of its properties to understand the rationale for this observation. The critical superconducting temperatures (Tc's) predicted under the assumption of a phononic pairing mechanism are found to be significantly lower than those experimentally observed. We argue that this disagreement cannot be explained by an unconventional coupling, as previously suggested, or by the existence of competing metastable structural phases. As a physically meaningful hypothesis to reconcile experimental and theoretical results, we assume the presence of Ti vacancies in the lattice. Our first-principles calculations indeed show that lattice vacancies can cause pressure dependent phonon softening and substantially increase the electron-phonon coupling at high pressure, yielding computed Tc's in agreement with the experimental measurements over the full pressure range from 150 to 300 GPa. We expect the proposed Tc enhancement mechanism to occur on a general basis in simple high-symmetry metals for various types of defects.

We study the structural and electronic properties of isolated single-wall carbon nanotubes (SWNTs) under hydrostatic pressure using a combination of theoretical techniques: Continuum elasticity models, classical molecular dynamics simulations, tight-binding electronic structure methods, and first-principles total energy calculations within the density-functional and pseudopotential frameworks. For pressures below a certain critical pressure $P_c$, the SWNTs' structure remains cylindrical and the Kohn-Sham energy gaps of semiconducting SWNTs have either positive or negative pressure coefficients depending on the value of $(n,m)$, with a distinct "family" (of the same $n-m$) behavior. The diameter and chirality dependence of the pressure coefficients can be described by a simple analytical expression. At $P_c$, molecular-dynamics simulations predict that isolated SWNTs undergo a pressure-induced symmetry-breaking transformation from a cylindrical shape to a collapsed geometry. This transition is described by a simple elastic model as arising from the competition between the bond-bending and $PV$ terms in the enthalpy. The good agreement between calculated and experimental values of $

The effects of pressure on antiferromagnetic (AFM) and superconducting phase transitions of 112-type Ca$_{1-x}$La$_{x}$FeAs$_{2}$ were studied, and the in-plane electrical resistivity $ρ_{ab}$ was measured with an indenter-type pressure cell. The AFM phase transition temperatures of $T_{\rm N}$ = 47, 63, and 63 K at ambient pressure for $x$ = 0.18, 0.21, and 0.26 was suppressed by applying pressure $P$, with superconductivity emerging at critical pressures of $P_{\rm c}$ $\simeq$ 0, 1.5, and 3.4 GPa, respectively. Correspondingly, the slope of $T_{\rm N}$ against $P$ decreased as $dT_{\rm N}/P$ $\simeq$ $-$15 and $-$2 K/GPa for $x$ = 0.21 and 0.26, respectively. Thus, although the AFM phase was stabilized with La doping $x$, the AFM phase was suppressed by pressure, and superconductivity eventually emerged.

Pressure, together with temperature and magnetic field, is an important thermodynamical parameter in physics. Investigating the response of a compound or of a material to pressure allows to elucidate ground states, investigate their interplay and interactions and determine microscopic parameters. Pressure tuning is used to establish phase diagrams, study phase transitions and identify critical points. Muon spin rotation/relaxation (muSR) is now a standard technique making increasing significant contribution in condensed matter physics, material science research and other fields. In this review, we will discuss specific requirements and challenges to perform muSR experiments under pressure, introduce the high-pressure muon facility at the Paul Scherrer Institute (PSI, Switzerland) and present selected results obtained by combining the sensitivity of the muSR technique with pressure.

We investigate how the pressure in fluctuating shear flow depends on the shear rate $S$ and on the system size $L$ by studying fluctuating hydrodynamics under shear conditions. We derive anomalous forms of the pressure for two limiting values of the dimensionless parameter $λ=SL^2/ν$, where $ν$ is the kinematic viscosity. In the case $λ\ll 1$, the pressure is not an intensive quantity because of the influence of the long-range spatial correlations of momentum fluctuations. In the other limit $λ\gg 1$, the long-range correlations are suppressed at large distances, and the pressure is intensive. In this case, however, there is the interesting effect that the non-equilibrium correction to the pressure is proportional to $S^{3/2}$, which was previously obtained with the projection operator method [K. Kawasaki and J. D. Gunton, Phys. Rev. {\bf A 8}, 2048, (1973)].

This paper presents a mathematical framework for a flexible pressure-sensor model using electrical impedance tomography (EIT). When pressure is applied to a conductive membrane patch with clamped boundary, the pressure-induced surface deformation results in a change in the conductivity distribution. This change can be detected in the current-voltage data ({\it i.e.,} EIT data) measured on the boundary of the membrane patch. Hence, the corresponding inverse problem is to reconstruct the pressure distribution from the data. The 2D apparent conductivity (in terms of EIT data) corresponding to the surface deformation is anisotropic. Thus, we consider a constrained inverse problem by restricting the coefficient tensor to the range of the map from pressure to 2D-apparent conductivity. This paper provides theoretical grounds for the mathematical model of the inverse problem. We develop a reconstruction algorithm based on a careful sensitivity analysis. We demonstrate the performance of the reconstruction algorithm through numerical simulations to validate its feasibility for future experimental studies.

Pulse transit time (PTT) has been widely used for cuffless blood pressure (BP) measurement. But, it requires more than one cardiovascular signals involving more than one sensing device. In this paper, we propose a method for continuous cuffless blood pressure measurement with the help of left ventricular ejection time (LVET). The LVET is estimated using a signal obtained through a micro-electromechanical system (MEMS)-based accelerometric sensor. The sensor acquires a seismocardiogram (SCG) signal at the chest surface, and the LVET information is extracted. Both systolic blood pressure (SBP) and diastolic blood pressure (DBP) are estimated by calibrating the system with the original arterial blood pressure values of the subjects. The proposed method is evaluated using different quantitative measures on the signals collected from ten subjects under the supine position. The performance of the proposed method is also compared with two earlier approaches, where PTT intervals are estimated from electrocardiogram (ECG)-photoplethysmogram (PPG) and SCG-PPG, respectively. The performance results clearly show that the proposed method is comparable with the state-of-the-art methods. Also, th

The effect of pressure on acceptor levels and hole scattering mechanisms in p-GaSe is investigated through Hall effect and resistivity measurements under quasi-hydrostatic conditions up to 4 GPa. The pressure dependence of the hole concentration is interpreted through a carrier statistics equation with a single (nitrogen) or double (tin) acceptor whose ionization energies decrease under pressure due to the dielectric constant increase. The pressure effect on the hole mobility is also accounted for by considering the pressure dependencies of both the phonon frequencies and the hole-phonon coupling constants involved in the scattering rates.

Studies of the effect of high pressure on superconductivity began in 1925 with the seminal work of Sizoo and Onnes on Sn to 0.03 GPa and have continued up to the present day to pressures in the 200 - 300 GPa range. Such enormous pressures cause profound changes in all condensed matter properties, including superconductivity. In high pressure experiments metallic elements, Tc values have been elevated to temperatures as high as 20 K for Y at 115 GPa and 25 K for Ca at 160 GPa. These pressures are sufficient to turn many insulators into metals and magnetics into superconductors. The changes will be particularly dramatic when the pressure is sufficient to break up one or more atomic shells. Recent results in superconductivity to Mbar pressures wll be discussed which exemplify the progress made in this field over the past 82 years.