Plastics recycling depends on everyday sorting practices and on how recycling services are communicated and experienced. Virtual reality (VR) can present these practices and services in situated, interactive form, yet its role in service design for plastics recycling is still emerging. This paper examines how VR tools can contribute to designing plastics recycling services through two application cases that address different stages of the recycling journey. The first case, Clean Cabin Escape, is a household scale VR escape room where players collect and sort waste items into locally relevant categories, with immediate feedback that supports practice with plastics recycling decisions. The second case is a VR simulation of a plastics recycling center that represents a real planned site and is used in service design workshops where stakeholders explore layout, signage and customer paths for plastics fractions. Across the cases, we analyse how VR supported learning, engagement and shared sensemaking, and how it interacted with other service design methods such as workshops, customer path mapping and physical artefacts. The findings show that VR can make domestic sorting tasks and compl
Plastics are essential to modern life, yet poor disposal practices contribute to low recycling rates and environmental accumulation-biological degradation and by-product reuse offer a path to mitigate this global threat. This report highlights key insights, future challenges, and research priorities identified during the CECAM workshop "Computations Meet Experiments to Advance the Enzymatic Depolymerization of Plastics One Atom at a Time", held in Trieste from May 6-8, 2025. The workshop brought together an interdisciplinary community of scientists focused on advancing the sustainable use of plastics through enzyme-based degradation. A key point from the discussions is that many bottlenecks in enzymatic recycling arise not only from process engineering challenges, but also from a limited understanding of the underlying molecular mechanisms. We argue that constraints on economic viability and sustainability (e.g., harsh solvents, high temperatures, substrate crystallinity, pretreatments) can-and should-be addressed directly through enzyme design, provided these factors are understood at the molecular level, in synergy with process optimization. For this, it is essential to rely on t
The escalating plastic waste crisis demands global action, yet mechanical recycling - currently the most prevalent strategy - remains severely underutilized. Only a small fraction of the total plastic waste is recycled in this manner, largely due to the significant variability in recycled plastics' mechanical properties. This variability stems from compositional fluctuations and impurities introduced throughout the materials' lifecycle and the recycling process, deterring industries with stringent product specifications from adopting recycled plastics on a wider scale. To overcome this challenge, we propose a composite structure inspired by nacre's microstructure - a natural material known for its exceptional mechanical performance despite its inherent randomness across multiple length scales. This bio-inspired design features stiff recycled plastic platelets ("bricks") within a soft polymeric matrix ("mortar"). We use a tension-shear-chain model to capture the deformation mechanism of the structure, and demonstrate, through a case study of commercial stretch wrap, that the proposed design reduces variability in effective elastic modulus by 89.5% and in elongation at break by 42%,
Plastics are ubiquitous in modern society, but the linear model of produce, use, and dispose results in massive amounts of resource consumption and pollution. Landfill and incineration of plastic waste is endemic, with no consensus on a clear path towards a more sustainable model. Progress is often hampered by a lack of clarity on what choices will enable a more sustainable circular plastics economy. Our Plastics Hierarchy of Fates tool addresses this by bringing together scattered information on the end-of-life fates of plastics in a more accessible format. This tool will support manufacturing, processing, and policy decisions in the push for a more sustainable future. Potential sorting and recycling decisions for plastics waste are discussed in the hierarchy and the consequences of different decisions are highlighted. The hierarchy is meant to inform potential outcomes but can also be used to help shape future interventions.
According to the EPA, only 25% of waste is recycled, and just 60% of U.S. municipalities offer curbside recycling. Plastics fare worse, with a recycling rate of only 8%; an additional 16% is incinerated, while the remaining 76% ends up in landfills. The low plastic recycling rate stems from contamination, poor economic incentives, and technical difficulties, making efficient recycling a challenge. To improve recovery, automated sorting plays a critical role. Companies like AMP Robotics and Greyparrot utilize optical systems for sorting, while Materials Recovery Facilities (MRFs) employ Near-Infrared (NIR) sensors to detect plastic types. Modern optical sorting uses advances in computer vision such as object recognition and instance segmentation, powered by machine learning. Two-stage detectors like Mask R-CNN use region proposals and classification with deep backbones like ResNet. Single-stage detectors like YOLO handle detection in one pass, trading some accuracy for speed. While such methods excel under ideal conditions with a large volume of labeled training data, challenges arise in realistic scenarios, emphasizing the need to further examine the efficacy of optic detection for
Single use plastics (SUPs) impose substantial environmental costs. Following Directive (EU) 2019/904, Austria introduced producer charges and mandatory participation in collection and recycling systems. This paper exploits a monthly panel of retail offer spells drawn from a price comparison platform to estimate the extent to which compliance costs pass through to posted online prices in Austria. The treated sample comprises keyword matched SUP products including balloons, to go cups, wet wipes, plastic bags, food containers, tobacco filter items, beverage bottles, and plastic wraps observed alongside a control group of non SUP listings over 2020-2024. A two way fixed effects (TWFE) specification places the average post treatment price increase at approximately 4.1 percent. A sequential TWFE model separating the administrative reporting phase from March 2023 and the payment due phase from March 2024 reveals that the larger adjustment occurred during the earlier reporting stage, with a reporting only effect of approximately 8.1 percent and an incremental payment phase effect of 5.6 percent. For balloons, a category subject to pronounced regulatory fee exposure, event study estimates
Over the last decade, fluvial plastics have been identified as major threat to aquatic environments and human health. In order to develop adequate mitigation strategies for plastic pollution, a fundamental process understanding of riverine plastic transport is of significant importance. In this context, the implementation of research findings into numerical simulation environments is anticipated to enhance modelling capabilities and to support a rigorous decision making. Recent experimental research has focused on the incipient motion of plastic particles, as well as on the effects of surface tension on plastic concentration profiles. While these investigations have advanced the state-of-the-art knowledge, current literature still displays a lack of basic insights into layer-specific plastic transport physics. In this study, first principles are applied to advance knowledge on free-surface detachment and bed entrainment of fluvial plastics. A novel relationship for the critical surface detachment velocity is derived, followed by the development of a framework that allows to relate plastic Shields parameters to those of natural sediments. Overall, it is anticipated that these develo
Pollution and climate change are some of the biggest challenges that humanity is facing. In such a context, efficient recycling is a crucial tool for a sustainable future. This work is aimed at creating a system that can classify different types of plastics by using picture analysis, in particular, black plastics of the type Polystyrene (PS) and Acrylonitrile Butadiene Styrene (ABS). They are two common plastics from Waste from Electrical and Electronic Equipment (WEEE). For this purpose, a Convolutional Neural Network has been tested and retrained, obtaining a validation accuracy of 95%. Using a separate test set, average accuracy goes down to 86.6%, but a further look at the results shows that the ABS type is correctly classified 100% of the time, so it is the PS type that accumulates all the errors. Overall, this demonstrates the feasibility of classifying black plastics using CNN machine learning techniques. It is believed that if a more diverse and extensive image dataset becomes available, a system with higher reliability that generalizes well could be developed using the proposed methodology.
Marine plastic pollution is an emerging environmental problem since it pollutes the ocean, air and food whilst endangering the ocean wildlife via the ingestion and entanglements. During the last decade, an enormous effort has been spent on finding possible solutions to marine plastic pollution. Remote sensing imagery sits in a crucial place for these efforts since it provides informative earth observation products, and the current technology offers further essential development. Despite the advances in the last decade, there is still a way to go for marine plastic monitoring research where challenges are rarely highlighted. This paper contributes to the literature with a critical review and aims to highlight literature milestones in marine debris and suspected plastics (MD&SP) monitoring by promoting the computational imaging methodology behind these approaches along with detailed discussions on challenges and potential future research directions.
THz spectroscopy has reached imaging capability with a spatial resolution of a few micrometres. This property enables measurements and imaging of biological samples like cells. THz photons have very low photon energies in the millielectronvolt range. These energies interact mainly with vibrations in the molecules. Therefore, the investigated samples are neither ionized nor their DNA damaged, making this the perfect method for application on living cell tissue. In the future, material databases with absorption spectra will empower this method to distinguish even artificial particles like microplastics inside biological tissue. Current research aims at the impact of plastic nanoparticles on cell tissue considering various aspects. One of them is the investigation of the potential harm, the interaction of these particles with human body cells can cause, as these highly abundant particles are found anywhere in the environment. THz absorption spectroscopy offers the opportunity to investigate the polymers and identify them using their specific absorption lines as a fingerprint. In this publication, we study different polymers and analyse their particular fingerprints in the THz frequenc
Combining multi-spectral satellite data and machine learning has been suggested as a method for monitoring plastic pollutants in the ocean environment. Recent studies have made theoretical progress regarding the identification of marine plastic via machine learning. However, no study has assessed the application of these methods for mapping and monitoring marine-plastic density. As such, this paper comprised of three main components: (1) the development of a machine learning model, (2) the construction of the MAP-Mapper, an automated tool for mapping marine-plastic density, and finally (3) an evaluation of the whole system for out-of-distribution test locations. The findings from this paper leverage the fact that machine learning models need to be high-precision to reduce the impact of false positives on results. The developed MAP-Mapper architectures provide users choices to reach high-precision ($\textit{abbv.}$ -HP) or optimum precision-recall ($\textit{abbv.}$ -Opt) values in terms of the training/test data set. Our MAP-Mapper-HP model greatly increased the precision of plastic detection to 95\%, whilst MAP-Mapper-Opt reaches precision-recall pair of 87\%-88\%. The MAP-Mapper c
Polyethylene naphthalate (PEN) and polyethylene teraphthalate (PET) are cheap and common polyester plastics used throughout the world in the manufacturing of bottled drinks, containers for foodstuffs, and fibers used in clothing. These plastics are also known organic scintillators with very good scintillation properties. As particle physics experiments increase in energy and particle flux density, so does radiation exposure to detector materials. It is therefore important that scintillators be tested for radiation tolerance at these generally unheard of doses. We tested samples of PEN and PET using laser stimulated emission on separate tiles exposed to 1 MRad and 10 MRad gamma rays with a 137Cs source. PEN exposed to 1 MRad and 10 MRad emit 71.4% and 46.7% of the light of an undamaged tile, respectively, and maximally recover to 85.9% and 79.5% after 5 and 9 days, respectively. PET exposed to 1 MRad and 10 MRad emit 35.0% and 12.2% light, respectively, and maximally recover to 93.5% and 80.0% after 22 and 60 days, respectively.
Proton scattering in some water and tissue equivalent phantom materials was measured to evaluate their simulation accuracy of water and respective human biological tissues. The measurements were performed on the medical facility of the ITEP synchrotron, proton energy was 219 MeV, a narrow beam was formed by a 3 mm collimator. A stack of plastic slabs was set closely to the collimator hole as a scatterer. Three types of Plastic Water (PW, PW LR and PW DT), lung, cortical bone, adipose and muscle plastics (CIRS Inc., USA) were used in the experiments as the substitutes under investigation and liquid water and PMMA slabs as reference materials. Dose (intensity) profiles were measured for each sample by two orthogonal strips of the Gafchromic EBT film. A total thickness of the plastic slab was from 4 to 16 cm depending on the material. The Gafchromic film response nonlinearity was taken into account by an additional calibration vs. absorbed dose in a wide proton beam, the temporal irradiation-to-scanning dependence was also accounted. The central part of each angular distribution was fitted by the Gaussian function and compared with the respective parameters calculated for the simulate
We use first-principles molecular dynamics simulations to study the deformation and breaking of neutron star crusts. When simulating with strain rates several orders of magnitude slower than prior work, we find a new regime of steady plastic flow beyond the breaking point that is independent of the initial crystal structure. Polycrystals exhibit a robust transition from linear elasticity to perfect plastic flow at shear strains of $ε= 0.05$, while monocrystals break at $ε= 0.11$ and then flow plastically. The universal post-break plasticity may arise because the crystal self-consistently assumes a defect density to accommodate the imposed strain rate. If broken crusts can re-anneal to large crystal sizes, crust breaking may repeat with implications for magnetar bursts and flares.
When two metal blocks are squeezed together the stresses in the asperity contact regions are usually so large that the asperities deform plastically, at least at short length scales. Many tribology properties of contacts, such as the contact stiffness and the electric and thermal contact resistance, and the fluid flow at interfaces, depend on the surface topography and are hence modified by the plastic flow. Here I present a new way to obtain an effective power spectra of plastically deformed surfaces to be used in the Persson contact mechanics theory. I also present results for the surface height topography obtained using the plastically modified power spectra, and compare to the experimental results of Yusof and Ripin, who studied the influence of plastic flow on the topography for a smooth steel surface squeezed against a rough steel surface. Finally, I discuss why some surfaces after plastic deformation have similar Gaussian roughness as before plastic deformation, only with smaller roughness amplitude, while other surfaces shows very skewed roughness after plastic deformation.
The construction industry is a major consumer of raw materials, accounting for nearly half of global material usage annually, while generating significant waste that poses sustainability challenges. This paper explores the untapped potential of recycled plastics as a primary construction material, leveraging their lightweight, flexible, and customizable properties for advanced applications in modular chainmail systems. Through a computational workflow, the study optimizes the design, testing, and fabrication of vacuum-sealed chainmail structures composed of recycled plastic filaments, demonstrating their adaptability and structural performance for architectural use. Key contributions include a novel methodology for integrating recycled plastic filaments into chainmail geometries, validated through 2D sectional testing, 3D shell structure generation, and physical modeling under vacuum constraints. The research identifies the rectangular chainmail configuration as the most efficient and adaptable, achieving superior deformation capacity, material efficiency, and load-bearing performance. Optimization strategies for temporary structures highlight practical deployment potential, balanc
Agents are minimally entities that are influenced by their past observations and act to influence future observations. This latter capacity is captured by empowerment, which has served as a vital framing concept across artificial intelligence and cognitive science. This former capacity, however, is equally foundational: In what ways, and to what extent, can an agent be influenced by what it observes? In this paper, we ground this concept in a universal agent-centric measure that we refer to as plasticity, and reveal a fundamental connection to empowerment. Following a set of desiderata on a suitable definition, we define plasticity using a new information-theoretic quantity we call the generalized directed information. We show that this new quantity strictly generalizes the directed information introduced by Massey (1990) while preserving all of its desirable properties. Under this definition, we find that plasticity is well thought of as the mirror of empowerment: The two concepts are defined using the same measure, with only the direction of influence reversed. Our main result establishes a tension between the plasticity and empowerment of an agent, suggesting that agent design n
Simultaneous catalytic hydrogen (H2) production and plastic waste degradation under light, known as photoreforming, is a novel approach to green fuel production and efficient waste management. Here, we use a high-entropy oxide (HEO), a new family of catalysts with five or more principal cations in their structure, for plastic degradation and simultaneous H2 production. The HEO shows higher activity than that of P25 TiO2, a benchmark photocatalyst, for the degradation of polyethylene terephthalate (PET) plastics in water. Several valuable products are produced by photoreforming of PET bottles and microplastics including H2, terephthalate, ethylene glycol and formic acid. The high activity is attributed to the diverse existence of several cations in the HEO lattice, lattice defects, and appropriate charge carrier lifetime. These findings suggest that HEOs possess high potential as new catalysts for concurrent plastic waste conversion and clean H2 production.
Plastic waste entering the environment through landfilling or improper disposal poses substantial risks to ecosystems and human health. Photoreforming is emerging as a clean photocatalytic technology that degrades plastic waste to organic compounds while simultaneously producing hydrogen fuel. This study introduces high-pressure torsion (HPT), a severe plastic deformation (SPD) method, as an innovative technique to enhance the photoreforming of polypropylene (PP) plastic mixed with a brookite TiO2 photocatalyst. Hydrogen production systematically increases with the number of HPT turns, accompanied by the formation of valuable small organic molecules. The enhancement in photocatalytic activity is attributed to strain-induced defect formation in both catalysts and plastics, as well as the creation of catalyst/plastic interphases that enhance charge carrier transport between inorganic and organic phases. These findings reveal a new functional application for SPD in energy conversion and sustainability.
Robust and credible material flow data are required to support the ongoing efforts to reconcile the economic and social benefits of plastics with their human and environmental health impacts. This study presents a global, but regionalized, life cycle material flow analysis (MFA) of all plastic polymers and applications for the period 1950-2020. It also illustrates how this dataset can be used to generate possible scenarios for the next 30 years. The historical account documents how the relentless growth of plastic production and use has consistently outpaced waste management systems worldwide and currently generates on the order of 60 Mt of mismanaged plastic waste annually. The scenarios show that robust interventions are needed to avoid annual plastic waste mismanagement from doubling by 2050.