搜索结果：parasitic

Adaptive andcooperative adaptive cruise control (ACC and CACC) and next generation CACC (CACC+) systems usually employ a constant time headway policy (CTHP) for platooning of connected and autonomous vehicles (CAVs). In ACC, the ego vehicle uses onboard sensors to measure the position and velocity of the predecessor vehicle to maintain a desired spacing. The CACC and CACC+systems use additional information, such as acceleration(s) communicated through vehicle-to-vehicle (V2V) communication of the predecessor vehicle(s); these systems have been shown to result in improved spacing performance, throughput, and safety over ACC. Parasitic dynamics are generally difficult to model and the parasitic parameters (delay, lag, etc.) are difficult to obtain. Parasitic actuation delays can have deleterious effects and impose limits on the mobility and safety of CAVs. It is reasonable to assume that the bounds on parasitic actuation delays are known a priori. For CAVs, we need to address both internal stability and string stability in the presence of parasitic actuation delays. This requires robustness of string and internal stability for all values of parasitic actuation delays that are within

A parasitic reconfigurable antenna array is a low-power approach for beamforming using passive tunable elements. Prior work on reconfigurable antennas in communication theory is based on ideal radiation pattern abstractions. It does not address the problem of physical realizability. Beamforming with parasitic elements is inherently difficult because mutual coupling creates non-linearity in the beamforming gain objective. We develop a multi-port circuit-theoretic model of the hybrid array with parasitic elements and antennas with active RF chain validated through electromagnetic simulations with a dipole array. We then derive the beamforming weight of the parasitic element using the theoretical beam pattern expression for the case of a single active antenna and multiple parasitic elements. We show that the parasitic beamforming is challenging because the weights are subject to coupled magnitude and phase constraints. We simplify the beamforming optimization problem using a shift-of-origin transformation to the typical unit-modulus beamforming weight. With this transformation, we derive a closed-form solution for the reconfigurable parasitic reactance. We generalize this solution to

In this article, we study the impact of self-heating effects (SHEs) and middle of line (MOL) and back-end of line (BEOL) induced parasitics on multi-tier CFET design, where multiple nanosheet devices are vertically stacked. We analyze and compare the 4-tier CFET design with the conventional 2-tier CFET, using TCAD models calibrated to experimental measurements. Additionally, TCAD simulations are used to model and analyze SHE-induced heat distribution and temperature profiles and to extract the detailed parasitic RC network from 3D models of CMOS inverters designed with full MOL and BEOL interconnects. At the device level, the maximum temperature rise (TMAX) caused by SHE in nFET and pFET devices of the 2-tier CFET architecture is 62 K and 74 K, respectively. Due to the increased distance from the substrate heat sink, the upper-tier nFET and pFET devices in the 4-tier design show higher TMAX of 83.5 K and 98.5 K and more heat trapping in the stacked layers. Furthermore, in the 4-tier CFET-based CMOS inverters, the BEOL-induced parasitic RCs are, respectively, 10 and 6.5 times higher in the top-tier than in the 2-tier CFET-based inverters. In the bottom tier, the corresponding parasi

Microring resonators enable the enhancement of nonlinear frequency mixing processes, generating output fields at frequencies that widely differ from the inputs, in some cases by more than an octave. The efficiency of such devices depends on effective in- and out-coupling between access waveguides and the microrings at these widely separated frequencies. One successful approach is to separate the coupling task across multiple waveguides, with a cutoff waveguide (a waveguide that does not support guided modes above a certain wavelength) being judiciously used to prevent unwanted excessive overcoupling at low frequencies. Here, we examine how such a cutoff waveguide can still induce parasitic loss in the coupling region of a microring resonator, thereby impacting nonlinear device performance. We verified this parasitic loss channel through both experiment and simulation, showing that a waveguide optimized for 532 nm (visible) and 780 nm (near-infrared), while nominally cut off at 1550 nm, can still introduce significant parasitic loss at telecom wavelengths. This is studied in the context of visible-telecom optical parametric oscillation, where the excess parasitic loss can be strong

This letter presents a generalized technique for cancelling the parasitic inductance of capacitors using a lattice network. The Z-matrix-based equivalent transformation shows that the conventional vertically symmetric inductance condition is only a sufficient condition and can be relaxed. A vertically asymmetric lattice network is then proposed, enabling the parasitic inductance of capacitors to be cancelled by adjusting only one inductance. The method is further extended to common-mode noise reduction using a common-mode choke, and both concepts are experimentally verified.

Soil-transmitted helminth (STH) infections continuously affect a large proportion of the global population, particularly in tropical and sub-tropical regions, where access to specialized diagnostic expertise is limited. Although manual microscopic diagnosis of parasitic eggs remains the diagnostic gold standard, the approach can be labour-intensive, time-consuming, and prone to human error. This paper aims to utilize a vision language model (VLM) such as Microsoft Florence that was fine-tuned to localize all parasitic eggs within microscopic images. The preliminary results show that our localization VLM performs comparatively better than the other object detection methods, such as EfficientDet, with an mIOU of 0.94. This finding demonstrates the potential of the proposed VLM to serve as a core component of an automated framework, offering a scalable engineering solution for intelligent parasitological diagnosis.

Superconducting qubits show great promise to realize practical quantum computers from micro-fabricated integrated circuits. However, their solid-state architecture bears the burden of parasitic modes in qubit materials and the control circuitry which cause decoherence and interfere with qubits. Here, we present evidence that wirebonds, which are used to contact the micro-circuits and to realize chip-to-chip airbridges, may contain parasitic Josephson junctions. In our experiment, such a junction was enclosed in a superconducting loop and so gave rise to the formation an RF-SQUID which interfered with a nearby flux-tunable transmon qubit. Periodic signatures observed in magnetic field sweeps revealed a strong AC-dispersive coupling of the parasitic RF-SQUID to both the qubit and its readout resonator, in addition to the DC-inductive coupling between RF-SQUID and qubit. Our finding sheds light on a previously unknown origin of decoherence due to parasitic Josephson junctions in superconducing circuits.

The magnetorotational instability (MRI) is considered a leading mechanism for driving angular momentum transport in differentially rotating astrophysical flows, including accretion disks and protoneutron stars. This process is mediated by the exponential amplification of the magnetic field whose final amplitude is envisioned to be limited by secondary (parasitic) instabilities. In this paper, we investigated the saturation of the MRI via parasitic modes relaxing previous approximations. We carried out the first systematic analysis of the evolution of parasitic modes as they feed off the exponentially growing MRI while being advected by the background shear flow. We provide the most accurate calculation of the amplification factor to which the MRI can grow before the fastest parasitic modes reach a comparable amplitude. We find that this amplification factor is remarkably robust, depending only logarithmically on the initial amplitude of the parasitic modes, in reasonable agreement with numerical simulations. Based on these insights, and guided by numerical simulations, we provide a simple analytical expression for the amplification of magnetic fields responsible for MRI-driven angu

We report the development of a cryogenic powder filter that simultaneously offers high attenuation of radio-frequency (RF) signals in the gigahertz (GHz) range and minimized parasitic capacitance to ground. Conventional powder filters, which consist of a signal line passing through a metal powder-filled housing, attenuate high-frequency signals via the skin effect. However, these designs often suffer from significant parasitic capacitance between the signal line and the grounded chassis, which can compromise the performance of sensitive measurement setups by limiting their frequency bandwidth. In this work, we demonstrate that a multilayer powder filter design effectively achieves both high RF attenuation and reduced parasitic capacitance. This solution suppresses sample heating due to the unintentional intrusion of RF signals through the wiring, without degrading the performance of the measurement setup.

Diffusion-based microfluidic gradient generators (DMGGs) are essential for various in-vitro studies due to their ability to provide a convection-free concentration gradient. However, these systems, often referred to as membrane-based DMGGs, exhibit delayed gradient formation due to the incorporated flow-resistant membrane. This limitation substantially hinders their application in dynamic and time-sensitive studies. Here, we accelerate the gradient response in DMGGs by removing the membrane and implementing new geometrical configurations to compensate for the membrane's role in suppressing parasitic flows. We introduce these novel configurations into two microfluidic designs: the H-junction and the Y-junction. In the H-junction design, parasitic flow is redirected through a bypass channel following the gradient region. The Y-junction design features a shared discharge channel that allows converging discharge flow streams, preventing the buildup of parasitic pressure downstream of the gradient region. Using hydraulic circuit analysis and fluid dynamics simulations, we demonstrate the effectiveness of the H-junction and Y-junction designs in suppressing parasitic pressure flows. Thes

This study investigates the stiffness characteristics of the Sprint Z3 head, also known as 3-PRS Parallel Kinematics Machines, which are among the most extensively researched and viably successful manipulators for precision machining applications. Despite the wealth of research on these robotic manipulators, no previous work has demonstrated their stiffness performance within the parasitic motion space. Such an undesired motion influences their stiffness properties, as stiffness is configuration-dependent. Addressing this gap, this paper develops a stiffness model that accounts for both the velocity-level parasitic motion space and the regular workspace. Numerical simulations are provided to illustrate the stiffness characteristics of the manipulator across all considered spaces. The results indicate that the stiffness profile within the parasitic motion space is both shallower and the values are smaller when compared to the stiffness distribution across the orientation workspace. This implies that evaluating a manipulator's performance adequately requires assessing its ability to resist external loads during parasitic motion. Therefore, comprehending this aspect is crucial for red

We propose a novel approach for boosting the realized gain in enhanced directivity arrays with both active and parasitic dipoles as radiating elements. The optimization process involves two main objectives: maximizing the end-fire gain and minimizing the reflection coefficient to ensure high realized gain. In the first step, the current excitation vector of the fully driven array is selected to maximize the end-fire gain. Then, all but one of the dipoles are reactively loaded according to their input impedance. Following that, the optimization focuses on the inter-element distance, computing the one that offers a favorable balance between the gain and the total efficiency. This multi-objective optimization leverages the differential evolution (DE) algorithm and utilizes a simple wire dipole as the unit element. Full-wave simulations further confirm the accuracy of our theoretical results. Our two- and three-element parasitic arrays achieve realized gain comparable to state-of-the-art designs, without relying on intricate unit elements or resource-intensive simulations. Moreover, our four- and five-element parasitic arrays deliver the highest realized gain values reported in the lit

Superconducting qubits are among the most promising candidates for building quantum computers. Despite significant improvements in qubit coherence, achieving a fault-tolerant quantum computer remains a major challenge, largely due to imperfect gate fidelity. A key source of this infidelity is the parasitic interaction between coupled qubits, which this thesis addresses in two- and three-qubit circuits. This parasitic interaction causes a bending between computational and non-computational levels, leading to a parasitic ZZ interaction. The thesis first investigates the possibility of zeroing the ZZ interaction in two qubit combinations: a pair of interacting transmons, and a hybrid pair of a transmon coupled to a capacitively shunted flux qubit (CSFQ). The theory developed is used to accurately simulate experimental results from our collaborators, who measured a CSFQ-transmon pair with and without a cross-resonance (CR) gate. The strong agreement between theory and experiment motivated further study of a CR gate that achieves 99.9% fidelity in the absence of static ZZ interaction. Since the CR pulse adds an additional ZZ component to the static part, a new strategy called dynamical

The observable quantities in optical interferometry, which are the modulus and the phase of the complex visibility, may be corrupted by parasitic fringes superimposed on the genuine fringe pattern. These fringes are due to an interference phenomenon occurring from straylight effects inside an interferometric instrument. We developed an analytical approach to better understand this phenomenon when straylight causes crosstalk between beams. We deduced that the parasitic interference significantly affects the interferometric phase and thus the associated observables including the differential phase and the closure phase. The amount of parasitic flux coupled to the piston between beams appears to be very influential in this degradation. For instance, considering a point-like source and a piston ranging from $λ/500$ to $λ/5$ in L band ($λ=3.5\:μ$m), a parasitic flux of about 1\% of the total flux produces a parasitic phase reaching at most one third of the intrinsic phase. The piston, which can have different origins (instrumental stability, atmospheric perturbations, ...), thus amplifies the effect of parasitic interference. According to specifications of piston correction in space or

In this work, we develop a linear model ODE to study the parasitic capillary ripples present on steep Stokes waves when a small amount of surface tension is included in the formulation. Our methodology builds upon the exponential asymptotic theory of Shelton & Trinh (J. Fluid Mech., vol. 939, 2022, A17), who demonstrated that these ripples occur beyond-all-orders of a small-surface-tension expansion. Our model equation, a linear ODE forced by solutions of the Stokes wave equation, forms a convenient tool to calculate numerical and asymptotic solutions. We show analytically that the parasitic capillary ripples that emerge in solutions to this linear model have the same asymptotic scaling and functional behaviour as those in the fully nonlinear problem. It is expected that this work will lead to the study of parasitic capillary ripples that occur in more general formulations involving viscosity or time-dependence.

Manual examination of faecal smear samples to identify the existence of parasitic eggs is very time-consuming and can only be done by specialists. Therefore, an automated system is required to tackle this problem since it can relate to serious intestinal parasitic infections. This paper reviews the ICIP 2022 Challenge on parasitic egg detection and classification in microscopic images. We describe a new dataset for this application, which is the largest dataset of its kind. The methods used by participants in the challenge are summarised and discussed along with their results.

Traditional computing hardware often encounters on-chip memory bottleneck on large scale Convolution Neural Networks (CNN) applications. With its unique in-memory computing feature, resistive crossbar-based computing attracts researchers' attention as a promising solution to the memory bottleneck issue in von Neumann architectures. However, the parasitic resistances in the crossbar deviate its behavior from the ideal weighted summation operation. In large-scale implementations, the impact of parasitic resistances must be carefully considered and mitigated to ensure circuits' functionality. In this work, we implemented and simulated CNNs on resistive crossbar circuits with consideration of parasitic resistances. Moreover, we carried out a new mapping scheme for high utilization of crossbar arrays on convolution, and a mitigation algorithm to mitigate parasitic resistances in CNN applications. The mitigation algorithm considers parasitic resistances as well as data/kernel patterns of each layer to minimize the computing error in crossbar-based convolutions of CNNs. We demonstrated the proposed methods with implementations of a 4-layer CNN on MNIST and ResNet(20, 32, and 56) on CIFAR-

In this work we study the role of parasitic interactions and microwave crosstalk in a system of two superconducting artificial atoms interacting via a single-mode coplanar waveguide. Through a general description of the effective dynamics of the atoms, beyond the two-level approximation, we show that the atom selectivity (ability to individually address an atom) is only dependent on the resultant phasor associated to the drives used to control the system. We then exploit the benefits of such a drive-dependent selectivity to describe how the coherent population inversion occurs in the atoms simultaneously, with no interference of residual atom-atom interaction. In this scenario the parasitic interaction works as a resource to fast and high fidelity control, as it gives rise to a new regime of frequencies for the atoms able to suppress effective atom-atom coupling (idling point). To end, we show how an entangling $i$SWAP gate is implemented with fidelity higher than $99\%$, even in presence of parasitic interactions. More than that, we argue that the existence of this interaction can be helpful to speed up the gate performance. Our results open prospects to a new outlook on the real