共找到 20 条结果
The main aspect of this paper is to introduce a new generalisation of nano open sets namely, nano h-open sets. These newly generalised sets serve as the foundation for the definition of nano h-continuous functions and some results involving their characterizations are established. Furthermore, the notion of nano h-open functions, nano h-irresolute functions, nano h-totally continuous functions, nano h-contra continuous functions and nano h-homeomorphism have been put forth. Some properties regarding these functions have been investigated and some remarks related to them have been provided, supported by examples.
Surface acoustic waves (SAWs) convey energy at subwavelength depths along surfaces. Using interdigital transducers (IDTs) and opto-acousto-optic transducers (OAOTs), researchers have harnessed coherent SAWs with nanosecond periods and micrometer localization depth for various applications. However, the utilization of cutting-edge OAOTs produced through surface nanopatterning techniques has set the upper limit for coherent SAW frequencies below 100 GHz, constrained by factors such as the quality and pitch of the surface nanopattern, not to mention the electronic bandwidth limitations of the IDTs. In this context, unconventional optically-controlled nano-transducers based on cleaved superlattices (SLs) are here presented as an alternative solution. To demonstrate their viability, we conducted proof-of-concept experiments using ultrafast lasers in a pump-probe configuration on SLs made of alternating AlxGa1-xAs and AlyGa1-yAs layers with approximately 70 nm periodicity and cleaved along their growth direction to produce a periodic nanostructured surface. The acoustic vibrations, generated and detected by laser beams incident on the cleaved surface, span a range from 40 GHz to 70 GHz,
Mutual synchronization of N serially connected spintronic nano-oscillators increases their coherence by a factor $N$ and their output power by $N^2$. Increasing the number of mutually synchronized nano-oscillators in chains is hence of great importance for better signal quality and also for emerging applications such as oscillator-based neuromorphic computing and Ising machines where larger N can tackle larger problems. Here we fabricate spin Hall nano-oscillator chains of up to 50 serially connected nano-constrictions in W/NiFe, W/CoFeB/MgO, and NiFe/Pt stacks and demonstrate robust and complete mutual synchronization of up to 21 nano-constrictions, reaching linewidths of below 200 kHz and quality factors beyond 79,000, while operating at 10 GHz. We also find a square increase in the peak power with the increasing number of mutually synchronized oscillators, resulting in a factor of 400 higher peak power in long chains compared to individual nano-constrictions. Although chains longer than 21 nano-constrictions also show complete mutual synchronization, it is not as robust and their signal quality does not improve as much as they prefer to break up into partially synchronized state
The extraordinary transmission of light through a nano slit in a metal film is enhanced by introducing a nano cavity antenna formed by a nearby metallic nano-strip over the slit opening. For a fixed wavelength, the width of the metallic nano-strip should be chosen to make the horizontal metal-insulator-metal waveguide of finite length resonant as a Fabry-Perot cavity. When such a cavity antenna is used to enhance the transmission through a non-resonant nano slit, the slit should be opened at a position with maximal magnetic field in the horizontal resonant cavity. It is shown that an optimized cavity antenna can enhance greatly the transmission of light through a non-resonant nano slit (by about 20 times) or a resonant nano slit (by 124%). The transmission spectrum of the nano slit can also be tuned by adjusting the width of the metallic nano-strip. Such a transmission enhancement with a nano cavity antenna is studied for the first time and the physical mechanism is explained.
The advancements in nanotechnology, material science, and electrical engineering have shrunk the sizes of electronic devices down to the micro/nanoscale. This brings the opportunity of developing the Internet of Nano Things (IoNT), an extension of the Internet of Things (IoT). With nanodevices, numerous new possibilities emerge in the biomedical, military fields, and industrial products. However, a continuous energy supply is mandatory for these devices to work. At the micro/nanoscale, batteries cannot supply this demand due to size limitations and the limited energy contained in the batteries. Internet of Harvester Nano Things (IoHNT), a concept of Energy Harvesting (EH) integrated with wireless power transmission (WPT) techniques, converts the existing different energy sources into electrical energy and transmits to IoNT nodes. As IoHNTs are not directly attached to IoNTs, it gives flexibility in size. However, we define the size of IoHNTs as up to 10 cm. In this review, we comprehensively investigate the available energy sources and EH principles to wirelessly power IoNTs. We discuss the IoHNT principles, material selections, and state-of-the-art applications of each energy sour
The spatially precise integration of arrays of micro-patterned two-dimensional (2D) crystals onto three-dimensionally structured Si/SiO$_2$ substrates represents an attractive strategy towards the low-cost system-on-chip integration of extended functions in silicon microelectronics. However, the reliable integration of the arrays of 2D materials on non-flat surfaces has thus far proved extremely challenging due to their poor adhesion to underlying substrates as ruled by weak van der Waals interactions. Here we report on a novel fabrication method based on nano-subsidence which enables the precise and reliable integration of the micro-patterned 2D materials/silicon photodiode arrays exhibiting high uniformity. Our devices display peak sensitivity as high as 0.35 A/W and external quantum efficiency (EQE) of ca. 90%, outperforming most commercial photodiodes. The nano-subsidence technique opens a viable path to on-chip integrate 2D crystals onto silicon for beyond-silicon microelectronics.
Within a new paradigm for communications on the nanoscale, high-frequency surface acoustic waves are becoming effective data carrier and encoder. On-chip communications require acoustic wave propagation along nano-corrugated surfaces which strongly scatter traditional Rayleigh waves. Here we propose the delivery of information using subsurface acoustic waves with hypersound frequencies ~20 GHz, which is a nanoscale analogue of subsurface sound waves in the ocean. A bunch of subsurface hypersound modes is generated by pulsed optical excitation in a multilayer semiconductor structure with a metallic nanograting on top. The guided hypersound modes propagate coherently beneath the nanograting, retaining the surface imprinted information, on a distance of more than 50 μm which essentially exceeds the propagation length of Rayleigh waves. The concept is suitable for interfacing single photon emitters, such as buried quantum dots, carrying coherent spin excitations in magnonic devices, and encoding the signals for optical communications at the nanoscale.
We have performed scanning angle-resolved photoemission spectroscopy with a nanometer-sized beam spot (nano-ARPES) on the cleaved surface of Pb5Bi24Se41, which is a member of the (PbSe)5(Bi2Se3)3m homologous series (PSBS) with m = 4 consisting of alternate stacking of the topologically-trivial insulator PbSe bilayer and four quintuple layers (QLs) of the topological insulator Bi2Se3. This allows us to visualize a mosaic of topological Dirac states at a nanometer scale coming from the variable thickness of the Bi2Se3 nano-islands (1-3 QLs) that remain on top of the PbSe layer after cleaving the PSBS crystal, because the local band structure of topological origin changes drastically with the thickness of the Bi2Se3 nano-islands. A comparison of the local band structure with that in ultrathin Bi2Se3 films on Si(111) gives us further insights into the nature of the observed topological states. This result demonstrates that nano-ARPES is a very useful tool for characterizing topological heterostructures.
In most of the cases, the experimental study of Nanotechnology involves high cost for Laboratory set-up and the experimentation processes were also slow. So, one cannot rely on experimental nanotechnology alone. As such, the Computer-Based molecular simulations and modeling are one of the foundations of computational nanotechnology. The computer based modeling and simulations were also referred as computational experimentations. In real experiments, the investigator doesn't have full control over the experiment. But, in Computational experimentation the investigator have full control over the experiment. The accuracy of such Computational nano-technology based experiment generally depends on the accuracy of the following things: Intermolecular interaction, Numerical models and Simulation schemes used. Once the accuracy of the Computational Scheme is guaranteed one can use that to investigate various nonlinear interactions whose results are completely unexpected and unforeseen. Apart from it, numerical modeling and computer based simulations also help to understand the theoretical part of the nano-science involved in the nano-system. They allow us to develop useful analytic and pred
Porous nanosponges, percolated with a three-dimensional network of 10-nm sized ligaments, recently emerged as promising substrates for plasmon-enhanced spectroscopy and (photo-)catalysis. Experimental and theoretical work suggests surface plasmon localization in some hot-spot modes as the physical origin of their unusual optical properties, but so far the existence of such hot-spots has not been proven. Here we use scattering-type scanning near-field nano-spectroscopy on individual gold nanosponges to reveal spatially and spectrally confined modes with 10 nanometer localization lengths by mapping the local optical density of states. High quality factors of individual hot-spots of more than 40 are demonstrated. A statistical analysis of near-field intensity fluctuations unveils plasmonics in the strong localization regime. The observed field localization and enhancement make such nanosponges an appealing platform for a variety of applications ranging from nonlinear optics to strong-coupling physics.
Spin-wave based transmission and processing of information is a promising emerging nano-technology that can help overcome limitations of traditional electronics based on the transfer of electrical charge. Among the most important challenges for this technology is the implementation of spin-wave devices that can operate without the need for an external bias magnetic field. Here we experimentally demonstrate that this can be achieved using sub-micrometer wide spin-wave waveguides fabricated from ultrathin films of low-loss magnetic insulator - Yttrium Iron Garnet (YIG). We show that these waveguides exhibit a highly stable single-domain static magnetic configuration at zero field and support long-range propagation of spin waves with gigahertz frequencies. The experimental results are supported by micromagnetic simulations, which additionally provide information for optimization of zero-field guiding structures. Our findings create the basis for the development of energy-efficient zero-field spin-wave devices and circuits.
Recent advances in nanotechnology have created tremendous excitement across different disciplines but in order to fully control and manipulate nano-scale objects, we must understand the forces at work at the nano-scale, which can be very different from those that dominate the macro-scale. We show that there is a new kind of curvature-induced force that acts between nano-corrugated electrically neutral plasmonic surfaces. Absent in flat surfaces, such a force owes its existence entirely to geometric curvature, and originates from the kinetic energy associated with the electron density which tends to make the profile of the electron density smoother than that of the ionic background and hence induces curvature-induced local charges. Such a force cannot be found using standard classical electromagnetic approaches, and we use a self-consistent hydrodynamics model as well as first principles density functional calculations to explore the character of such forces. These two methods give qualitative similar results. We found that the force can be attractive or repulsive, depending on the details of the nano-corrugation, and its magnitude is comparable to light induced forces acting on pla
A superconducting quantum interference device (SQUID) miniaturized into nanoscale is promising in the inductive detection of a single electron spin. A nano-SQUID with a strong spin coupling coefficient, a low flux noise, and a wide working magnetic field range is highly desired in a single spin resonance measurement. Nano-SQUIDs with Dayem-bridge junctions excel in a high working field range and in the direct coupling from spins to the bridge. However, the common planar structure of nano-SQUIDs is known for problems such as a shallow flux modulation depth and a troublesome hysteresis in current-voltage curves. Here, we developed a fabrication process for creating three-dimensional (3-D) niobium (Nb) nano-SQUIDs with nano-bridge junctions that can be tuned independently. Characterization of the device shows up to 45.9 % modulation depth with a reversible current-voltage curve. Owning to the large modulation depth, the measured flux noise is as low as 0.34 μΦ$_0$/Hz$^{1/2}$. The working field range of the SQUID is greater than 0.5 T parallel to the SQUID plane. We believe that 3-D Nb nano-SQUIDs provide a promising step toward effective single-spin inductive detection.
Spin-torque nano-oscillators (STNOs) are a type of nanoscale microwave auto-oscillators utilizing spin-torque to generate magnetodynamics with great promise for applications in microwaves, magnetic memory, and neuromorphic computing. Here, we report the first demonstration of exchange-spring STNOs, with an exchange-spring ([Co/Pd]-Co) reference layer and a perpendicular ([Co/Ni]) free layer. This magnetic configuration results in high-frequency (>10 GHz) microwave emission at a zero magnetic field and exchange-spring dynamics in the reference layer and the observation of magnetic droplet solitons in the free layer at different current polarities. Our demonstration of bipolar and field-free exchange-spring-based STNOs operating over a 20 GHz frequency range greatly extends the design freedom and functionality of the current STNO technology for energy-efficient high-frequency spintronic and neuromorphic applications.
Transition metal dichalcogenides have emerged as promising materials for nano-photonic resonators due to their large refractive index, low absorption within a large portion of the visible spectrum and compatibility with a wide range of substrates. Here we use these properties to fabricate WS$_2$ double-pillar nano-antennas in a variety of geometries enabled by the anisotropy in the crystal structure. Using dark field spectroscopy, we reveal multiple Mie resonances, to which we couple WSe$_2$ monolayer photoluminescence and achieve Purcell enhancement and an increased fluorescence by factors up to 240. We introduce post-fabrication atomic force microscope repositioning and rotation of dimer nano-antennas, achieving gaps as small as 10$\pm$5 nm, opening the possibility to a host of potential applications including strong Purcell enhancement of single photon emitters and optical trapping, which we study in simulations. Our findings highlight the advantages of using transition metal dichalcogenides for nano-photonics by exploring new applications enabled by their unique properties.
Photonic structures in diamond are key to most of its application in quantum technology. Here, we demonstrate tapered nano-waveguides structured directly onto the diamond substrate hosting shallow-implanted nitrogen vacancy (NV) centers. By optimization based on simulations and precise experimental control of the geometry of these pillar-shaped nano-waveguides, we achieve a net photon flux up to ~ $1.7 \cdot 10^6 /s$. This presents the brightest monolithic bulk diamond structure based on single NV centers so far. We observe no impact on excited state lifetime and electronic spin dephasing time ($T_2$) due to the nanofabrication process. Possessing such high brightness with low background in addition to preserved spin quality, this geometry can improve the current nanomagnetometry sensitivity ~ 5 times. In addition, it facilitates a wide range of diamond defects-based magnetometry applications. As a demonstration, we measure the temperature dependency of $T_1$ relaxation time of a single shallow NV center electronic spin. We observe the two-phonon Raman process to be negligible in comparison to the dominant two-phonon Orbach process.
A scheme for detection of abnormality in molecular nano-networks is proposed. This is motivated by the fact that early diagnosis, classification and detection of diseases such as cancer play a crucial role in their successful treatment. The proposed nano-abnormality detection scheme (NADS) comprises of a two-tier network of sensor nano-machines (SNMs) in the first tier and a data gathering node (DGN) at the sink. The SNMs detect the presence of competitor cells as abnormality that is captured by variations in parameters of a nano-communications channel. In the second step, the SNMs transmit micro-scale messages over a noisy micro communications channel (MCC) to the DGN, where a decision is made upon fusing the received signals. The detection performance of each SNM is analyzed by setting up a Neyman-Pearson test. Next, taking into account the effect of the MCC, the overall performance of the proposed NADS is quantified in terms of probabilities of misdetection and false alarm. A design problem is formulated, when the optimized concentration of SNMs in a sample is obtained for a high probability of detection and a limited probability of false alarm.
Scalable memories that can match the speeds of superconducting logic circuits have long been desired to enable a superconducting computer. A superconducting loop that includes a Josephson junction can store a flux quantum state in picoseconds. However, the requirement for the loop inductance to create a bi-state hysteresis sets a limit on the minimal area occupied by a single memory cell. Here, we present a miniaturized superconducting memory cell based on a Three-Dimensional (3D) Nb nano-Superconducting QUantum Interference Device (nano-SQUID). The major cell area here fits within an 8*9 μm^2 rectangle with a cross-selected function for memory implementation. The cell shows periodic tunable hysteresis between two neighbouring flux quantum states produced by bias current sweeping because of the large modulation depth of the 3D nano-SQUID (~66%). Furthermore, the measured Current-Phase Relations (CPRs) of nano-SQUIDs are shown to be skewed from a sine function, as predicted by theoretical modelling. The skewness and the critical current of 3D nano-SQUIDs are linearly correlated. It is also found that the hysteresis loop size is in a linear scaling relationship with the CPR skewness
Clustering and dynamics of nano-sized particles (nano dust) is investigated using high-resolution ($1024^3$) simulations of compressible isothermal hydrodynamic turbulence, intended to mimic the conditions inside cold molecular clouds in the interstellar medium. Nano-sized grains may cluster in a turbulent flow (small-scale clustering), which increases the local grain density significantly. Together with the increased interaction rate due to turbulent motions, aggregation of interstellar nano-dust may be plausible.
Previous studies on ultrasound-propelled nano- and microparticles have considered only systems where the particle orientation is perpendicular to the direction of propagation of the ultrasound. However, in future applications of these particles, they will typically be able to attain also other orientations. Therefore, using direct acoustofluidic simulations, we here study how the propulsion of cone-shaped nano- and microparticles, which are known to have a particularly efficient acoustic propulsion and are therefore promising candidates for future applications, depends on their orientation relative to the propagation direction of a traveling ultrasound wave. Our results reveal that the propulsion of the particles depends strongly on their orientation relative to the direction of wave propagation and that the particles tend to orient perpendicularly to the wave direction. We also present the orientation-averaged translational and angular velocities of the particles, which correspond to the particles' effective propulsion for an isotropic exposure to ultrasound. Our results allow assessing how free ultrasound-propelled colloidal particles move in three spatial dimensions and thus con