共找到 20 条结果
Materials that are capable of extracting gold from complex sources, especially electronic waste (e-waste) with high efficiency are needed for gold resource sustainability and effective e-waste recycling. However, it remains challenging to achieve high extraction capacity to trace amount of gold, and precise selectivity to gold over a wide range of complex co-existing elements. Here we report a reduced graphene oxide (rGO) material that has an ultrahigh extraction capacity for trace amounts of gold (1,850 mg/g and 1,180 mg/g to 10 ppm and 1 ppm gold). The excellent gold extraction behavior is accounted to the graphene areas and oxidized regions of rGO. The graphene areas spontaneously reduce gold ions to metallic gold, and the oxidized regions provide a good dispersibility so that efficient adsorption and reduction of gold ions by the graphene area can be realized. The rGO is also highly selective to gold ions. By controlling the protonation process of the functional groups on the oxidized regions of rGO, it shows an exclusive gold extraction without adsorption of 14 co-existing elements seen in e-waste. These discoveries are further exploited in highly efficient, continuous gold re
Chemical interface damping is a change in the effective collision frequency of conduction band electrons in metal originating from a chemical change of the metal interface. In this work, we present in-situ ellipsometric measurements that reveal the chemical interface damping effect from electrochemical oxidation of single crystal and polycrystalline gold films. We observe an increase in collision frequency of up to 21 meV for single-crystalline gold. To compare to results obtained with thiols and metal-oxides on gold nanoparticles, we normalize the collision frequency by the electron mean free path to the surface of the structure. We show that electrochemical gold oxidation provides a stronger effect on collision frequency than these coatings. Similar ellipsometric experiments have previously been conducted to investigate the optical properties of gold oxide, but without taking chemical interface damping into account. The change in reflection from oxidation of gold was solely attributed to the oxide coating. We also show that the chemical interface damping effect saturates at a larger effective oxide thickness, which is attributed to the stabilization of the gold-oxide interface.
Gold nanoparticles have shown great prospective in cancer diagnosis and therapy, but they can not be metabolized and prefer to accumulate in liver and spleen due to their large size. The gold nanoclusters with small size can penetrate kidney tissue and have promise to decrease in vivo toxicity by renal clearance. In this work, we explore the in vivo renal clearance, biodistribution, and toxicity responses of the BSA- and GSH-protected gold nanoclusters for 24 hours and 28 days. The BSA-protected gold nanoclusters have low-efficient renal clearance and only 1% of gold can be cleared, but the GSH-protected gold nanoclusters have high-efficient renal clearance and 36 % of gold can be cleared after 24 hours. The biodistribution further reveals that 94% of gold can be metabolized for the GSH-protected nanoclusters, but only less than 5% of gold can be metabolized for the BSA-protected nanoclusters after 28 days. Both of the GSH- and BSA-protected gold nanoclusters cause acute infection, inflammation, and kidney function damage after 24 hours, but these toxicity responses for the GSH-protected gold nanoclusters can be eliminated after 28 days. Immune system can also be affected by the tw
We report on the crystallographic structure of penta-twinned gold nanoparticles. Although gold typically exhibits a face-centered cubic (fcc) lattice, other phases have been reported in some nanoscale systems. We show that the crystallographic system and the lattice parameters of the gold unit cell strongly depend on the nanoparticle geometry, for a wide size range. Specifically, we show that decahedra exhibit a body-centered tetragonal structure (I4/mmm), whereas rods and bipyramids exhibit a body-centered orthorhombic structure (Immm). These changes in the crystallographic structure are explained by the elastic lattice distortions required to close the mismatch gap in penta-twinned nanoparticles, with respect to fcc single-crystal gold nanoparticles. The effects of nanoparticle shape and size on the surface pressure and the subsequent distortions are additionally discussed.
This paper provides an innovative perspective on the role of gold as a hedge and safe haven. We use a quantile-on-quantile regression approach to capture the dependence structure between gold returns and changes in uncertainty under different gold market conditions, while considering the nuances of uncertainty levels. To capture the core uncertainty effects on gold returns, a dynamic factor model is used. This technique allows summarizing the impact of six different indexes (namely economic, macroeconomic, microeconomic, monetary policy, financial and political uncertainties) within one aggregate measure of uncertainty. In doing so, we show that the gold's role as a hedge and safe haven cannot be assumed to hold at all times. This ability seems to be sensitive to the gold's various market states (bearish, normal or bullish) and to whether the uncertainty is low, middle or high. Interestingly, we find a positive and strong relationship between gold returns and the uncertainty composite indicator when the uncertainty attains its highest level and under normal gold market scenario. This suggests that holding a diversified portfolio composed of gold could help protecting against exposu
In biomedical research and the practice of cancer therapy, gold nanoparticles have been used to visualize malignant tumors, as the heated bodies for hyperthermia of cancer cells, as drug carriers to deliver drugs to a cancer cell, but, to the best of our knowledge, they have not yet been used consciously as the sources of terahertz (THz) radiation delivered to a cancer cell that contributes to the inhibition of cell activity. It is predicted here that gold nanoparticles less than 8 nm in size are sources of spontaneous THz radiation, and the possibility of their application in oncology is due to the known effects of THz radiation on the cells of living organisms. There are indications that nanoparticles with a size comparable to the width of the major groove of the DNA molecule will be the most effective. Another effect that has not yet been taken into account in biomedical studies using gold nanoparticles is that of local electric fields due to the contact potential difference above edges and vertices of gold nanoclusters. The prerequisites and possibilities for searching for the manifestations of these two effects when gold nanoparticles are introduced into living cells of organi
Gold nanoparticles have been conceived as a radiosensitizer in cancer radiation therapy, but one of the important questions for primary drug screening is what size of gold nanoparticles can optimally enhance radiation effects. Herein, we perform in vitro and in vivo radiosensitization studies of 4.8, 12.1, 27.3, and 46.6 nm PEG-coated gold nanoparticles. In vitro results show that all sizes of the PEG-coated gold nanoparticles can cause a significant decrease in cancer cell survival after gamma radiation. 12.1 and 27.3 nm PEG-coated gold nanoparticles have dispersive distributions in the cells and have stronger sensitization effects than 4.8 and 46.6 nm particles by both cell apoptosis and necrosis. Further, in vivo results also show all sizes of the PEG-coated gold nanoparticles can decrease tumor volume and weight after 5 Gy radiations, and 12.1 and 27.3 nm PEG-coated gold nanoparticles have greater sensitization effects than 4.8 and 46.6 nm particles, which can lead to almost complete disappearance of the tumor. In vivo biodistribution confirms that 12.1 and 27.3 nm PEG-coated gold nanoparticles are accumulated in the tumor with high concentrations. The pathology, immune respons
Motivated by the experimentally observed high mobility of gold atoms on graphene and their tendency to form nanometer-sized clusters, we present a density functional theory study of the ground state structures of small gold clusters on graphene, their mobility and clustering. Our detailed analysis of the electronic structures identifies the opportunity to form strong gold-gold bonds and the graphene mediated interaction of the pre-adsorbed fragments as the driving forces behind gold's tendency to aggregate on graphene. While clusters containing up to three gold atoms have one unambiguous ground state structure, both gas phase isomers of a cluster with four gold atoms can be found on graphene. In the gas phase the diamond shaped Au$_{4}^{D}$ cluster is the ground state structure, whereas the Y shaped Au$_{4}^{Y}$ becomes the actual ground state when adsorbed on graphene. As we show, both clusters can be produced on graphene by two distinct clustering processes. We also studied in detail the stepwise formation of a gold dimer out of two pre-adsorbed adatoms, as well as the formation of Au$_{3}$. All reactions are exothermic and no further activation barriers, apart from the diffusion
If a finite poset $Q$ satisfies the Gold Partition Conjecture, and $P$ is a finite poset, then for any $i$ in $P$ the lexicographic sum of $P$ with $Q$ on the point $i$, satisfies the Gold Partition Conjecture.
The recent fragmentation data for central collisions of Gold on Gold are even qualitatively different from those for central collisions of Argon on Scandium. The latter can be fitted with a lattice gas model calculation. Effort is made to understand why the model fails for Gold on Gold. The calculation suggests that the large Coulomb interaction which is operative for the larger system is responsible for this discrepancy. This is demonstrated by mapping the lattice gas model to a molecular dynamics calculation for disassembly. This mapping is quite faithful for Argon on Scandium but deviates strongly for Gold on Gold. The molecular dynamics calculation for disassembly reproduces the characteristics of the fragmentation data for both Gold on Gold and Argon on Scandium.
This paper studies the empirical tracking performance of leveraged ETFs on gold, and their price relationships with gold spot and futures. For tracking the gold spot, we find that our optimized portfolios with short-term gold futures are highly effective in replicating prices. The market-traded gold ETF (GLD) also exhibits a similar tracking performance. However, we show that leveraged gold ETFs tend to underperform their corresponding leveraged benchmark. Moreover, the underperformance worsens over a longer holding period. In contrast, we illustrate that a dynamic portfolio of gold futures tracks significantly better than various static portfolios. The dynamic portfolio also consistently outperforms the respective market-traded LETFs for different leverage ratios over multiple years.
A comparison of the secondary emission (photoluminescence) and Bragg reflection spectra of photonic crystals (PC), namely, synthetic opals, opals infiltrated by colloidal gold, glycine, and a complex of colloidal gold with glycine is performed. The infiltration of colloidal gold and a complex of colloidal gold with glycine into the pores of PC causes a short-wavelength shift (about 5-15 nm) of the Bragg reflection and increases the intensity of this band by 1.5-3 times. In photoluminescence, the infiltration of PC by colloidal gold and colloidal gold with glycine suppresses the PC emission band near 375-450 nm and enhances the shoulder of the stop-zone band of PC in the region of 470-510 nm. The shape of the observed PC emission band connected with defects in synthetic opal is determined by the type of infiltrates and the excitation wavelength. Possible mechanisms of the effects are discussed.
Gold has been long thought as an inert metal which finds most of its use in jewelry and monetary exchange. However, catalysis by gold has rapidly become a hot topic in chemistry ever since Haruta and Hutchings found gold to be an extraordinary good heterogeneous catalyst in certain reactions. Here in this paper, several model reactions which made gold historically famous as a catalyst and a currently hot topic will be demonstrated, such as oxidation of CO, selective oxidation, and hydrodechlorination. Conclusions on the chemical nature of gold will be made as well as future perspectives of designing gold as a better catalyst.
Aggregation of the nanoparticles is a natural phenomena due to various biological and physical parameters but these aggregates are highly unstable. If aggregates would have been stable then it might be useful for some biomedical applications. To study the optical properties and photothermal heat generation of stable aggregates of the metal nanopartilces, we present a forced synthesis of aggregates of small gold nanorods in a mixture of Dulbecco's Modified Eagle's medium (DMEM) and Bovine Serum Albumin (BSA). We synthesised hexadecyltrimethylammonium bromide (CTAB) coated gold nanorods and then prepared the stable aggregates to study the optical characteristics of these aggregates. Absorption spectra of aggregates show the redshift compared to the monodispersive gold nanorods and confirm that the shape and size of aggregate depend on the amount of BSA in DMEM as well as on the concentration of CTAB in the stock solution of the gold nanorods suspension. The higher concentration of the BSA in DMEM and lower concentration of CTAB of monodispersive gold nanorod suspension causes greater redshift. We tuned the well defined plasmonic absorption resonance peaks of the aggregates of gold na
The thermal stabilization of thin gold nanowires with a diameter of about 2 nm by surfactants is investigated by means of classical molecular dynamics simulations. While the well-known melting point depression leads to a much lower melting of gold nanowires compared to bulk gold, coating the nanowires with surfactants can reverse this, given that the attractive interaction between surfactant molecules and gold atoms lies beyond a certain threshold. It is found that the melting process of coated nanowires is dominated by surface instability patterns, whereas the melting behaviour of gold nanowires in vacuum is dominated by the greater mobility of atoms with lower coordination numbers that are located at edges and corners. The suppression of the melting by surfactants is explained by the isotropic pressure acting on the gold surface (due to the attractive interaction) which successfully suppresses large-amplitude thermal motions of the gold atoms. (Note that this is a pre-peer-reviewed version which has been submitted to Nanoscale.)
We report a direct observation of segregation of gold atoms to the near surface regime due to 1.5 MeV Au2+ ion impact on isolated gold nanostructures deposited on silicon. Irradiation at fluences of 6x10^13, 1x10^14 and 5x10^14 ions cm-2 at a high beam flux of 6.3x1012 ions cm-2 s-1 show a maximum transported distance of gold atoms into the silicon substrate to be 60, 45 and 23 nm, respectively. At a lower fluence (6x1013 ions cm-2) transport has been found to be associated with the formation of gold silicide (Au5Si2). At a high fluence value of 5x10^14 ions cm-2, disassociation of gold silicide and out-diffusion lead to segregation of gold to defect - rich surface and interface region.
Electrical detection of messenger ribonucleic acid (mRNA) is a promising approach to enhancing transcriptomics and disease diagnostics because of its sensitivity, rapidity, and modularity. Reported here is a fast SARS-CoV-2 mRNA biosensor (<1 minute) with a limit of detection of 1 aM, and dynamic range of 4 orders of magnitude and a linear sensitivity of 22 mV per molar decade. These figures of merit were obtained on photoresistlessly patterned monolayer graphene field-effect transistors (FETs) derived from commercial four-inch graphene on 90 nm of silicon dioxide on p-type silicon. Then, to facilitate mRNA hybridization, graphene sensing mesa were coated with an ultrathin sub-percolation threshold gold film for bonding 3'-thiolated single-stranded deoxyribonucleic acid (ssDNA) probes complementary to SARS-CoV-2 nucleocapsid phosphoprotein (N) gene. Sub-percolated gold was used to minimize the distance between the graphene material and surface hybridization events. The liquid-transfer characteristics of the graphene FETs repeatedly shows correlation between the Dirac voltage and the copy number of polynucleotide. Ultrathin percolated gold films on graphene FETs facilitate two-di
In this work we present the magnetic properties of gold coated FePt nanoparticles and the study of stable aqueous dispersions of FePt@Au and FePt synthesized after ligand exchange with mercaptoundecanoic acid. The particle size determined from TEM micrographs goes from 4 nm for the uncoated nanoparticles to a maximum of 10 nm for the gold coated ones indicating that the thickness of the shell ranges from 1 to 3 nm. The magnetic characterization consists in hysteresis cycles at 10 and 300 K. The results show that, at low field and room temperature, the magnetic behavior of uncoated and coated nanoparticles are surprisingly quite similar. Since the gold coated nanoparticles keep the magnetic properties of FePt and the presence of gold improves the functionalization of nanoparticles, the system is suitable for biological application. Mercaptoundecanoic ligand transfer was used to render water stable nanoparticles in a wide pH range. Transmission electron microscopy and dynamic light scattering results show the nanoparticles slightly agglomerate after ligand exchange. Fourier transform infrared spectroscopy results suggest that thiol bind to the gold atoms of the surface.
We are designing an automated technique to find and recommend experts for helping in Requirements Engineering tasks, which can be done by ranking the available people by level of expertise. For evaluating the correctness of the rankings produced by the automated technique, we want to compare them to a gold standard. In this work, we ask external people to look at a set of discussions and to rank their participants, before to evaluate the reliability of these rankings to serve as a gold standard. We describe the setting and running of this survey, the method used to build the gold standard from the rankings of the subjects, and the analysis of the results to obtain and validate this gold standard. Through the analysis of the results, we conclude that we obtained a reasonable gold standard although we lack evidences to support its total correctness. We also made the interesting observation that the most reliable subjects build the least ordered rankings (i.e. has few ranks with several people per rank), which goes against the usual assumptions of Information Retrieval measures.
Gold nanostructures have important applications in nanoelectronics, nano-optics as well as in precision metrology due to their intriguing opto-electronic properties. These properties are governed by the bulk band structure but to some extend are tunable via geometrical resonances. Here we show that the band structure of gold itself exhibits significant size-dependent changes already for mesoscopic critical dimensions below 30 nm. To suppress the effects of geometrical resonances and grain boundaries, we prepared atomically flat ultrathin films of various thicknesses by utilizing large chemically grown single-crystalline gold platelets. We experimentally probe thickness-dependent changes of the band structure by means of two-photon photoluminescence and observe a surprising 100-fold increase of the nonlinear signal when the gold film thickness is reduced below 30 nm allowing us to optically resolve single-unit-cell steps. The effect is well explained by density functional calculations of the thickness-dependent 2D band structure of gold.