搜索结果：forming

Two-point incremental forming (TPIF) is a flexible sheet metal forming process, commonly divided into positive and negative configurations. In order to improve the dimensional accuracy, thickness distribution, and overall formability of conical sheet parts, this study examines the negative TPIF approach. A series of experiments were conducted by varying key process parameters including tool diameter, vertical step size, forming strategy, and lubricant type. The forming process was performed on 0.9 mm thick St12 steel sheets using a CNC milling machine equipped with a full die set and a spherical-head forming tool. According to the results, increasing the tool diameter reduced material thinning and failure risk by improving thickness distribution and increasing the minimum wall thickness from 0.24 mm to 0.5 mm. On the other hand, sharp features were better defined with smaller tool diameters. The corresponding plastic strain was decreased and the risk of tearing was reduced by using a multi-stage forming technique, which also improved strain distribution and decreased thinning. Lubricant type showed limited influence on geometric accuracy or thickness uniformity but had a noticeable

The present paper is a short introduction to metal forming. The paper highlights the different disciplines that should be considered when analyzing metal forming. Hence, mechanical flow, heat flow, mechanical and thermal contact, and microstructure evolution are presented within the perspective of metal forming. For every aspect, well-established knowledge is presented in addition to scientific open questions on which active research is still done.

Conventional multi-beam forming with fixed-position antenna (FPA) arrays needs to trade-off between maximizing the beamforming gain over desired directions and minimizing the interference power over undesired directions. In this letter, we study the enhanced multi-beam forming with a linear movable-antenna (MA) array by exploiting the new degrees of freedom (DoFs) via antennas' position optimization. Specifically, we jointly optimize the antenna position vector (APV) and antenna weight vector (AWV) to maximize the minimum beamforming gain over multiple desired directions, subject to a given constraint on the maximum interference power over undesired directions. We propose an efficient alternating optimization algorithm to find a suboptimal solution by iteratively optimizing one of the APV and AWV with the other being fixed. Numerical results show that the proposed multi-beam forming design with MA arrays can significantly outperform that with the traditional FPA arrays and other benchmark schemes in terms of both beamforming gain and interference suppression.

Predicting the glass-forming ability (GFA) of chemical compositions remains a fundamental challenge in materials science, especially for oxide glasses with broad compositional diversity. Traditional empirical and thermodynamic approaches often fail to capture the complex, nonlinear factors governing vitrification. In this study, we applied two ensemble machine learning algorithms-Random Forest (RF) and Extreme Gradient Boosting (XGB)-to the glass_ternary_hipt dataset to predict the GFA of ternary oxide glasses directly from composition-derived descriptors. Both models achieved excellent predictive accuracy (R^2 > 0.92, MAE < 0.04), confirming that GFA is learnable from compositional features alone. Feature importance analysis revealed that electronegativity variance, atomic size mismatch, and valence electron descriptors are the most influential factors, while cohesive energy and ionic radius provided secondary contributions. These chemically interpretable features align with established theories of glass formation, thereby bridging predictive performance with physical understanding. The novelty of this work lies in systematically extending ML-based predictive modeling to ter

FIR and submm observations have established the fundamental role of dust-obscured star formation in the assembly of stellar mass over the past 12 billion years. At z between 2 and 4, the bulk of star formation is enshrouded in dust, and dusty star forming galaxies (DSFGs) contain about half of the total stellar mass density. Star formation develops in dense molecular clouds, and is regulated by a complex interplay between all the ISM components that contribute to the energy budget of a galaxy: gas, dust, cosmic rays, interstellar electromagnetic fields, gravitational field, dark matter. Molecular gas is the actual link between star forming gas and its complex environment, providing by far the richest amount of information about the star formation process. However, molecular lines interpretation requires complex modeling of astrochemical networks, which regulate the molecular formation and establishes molecular abundances in a cloud, and a modeling of the physical conditions of the gas in which molecular energy levels become populated. This paper critically reviews the main astrochemical parameters needed to get predictions about molecular signals in DSFGs. We review the current kno

We present bivariate luminosity and stellar mass functions of H$α$ star forming galaxies drawn from the Galaxy And Mass Assembly (GAMA) survey. While optically deep spectroscopic observations of GAMA over a wide sky area enable the detection of a large number of $0.001<{SFR}_{Hα}$ (M$_{\odot}$ yr$^{-1}$)$<100$ galaxies, the requirement for an H$α$ detection in targets selected from an $r$-band magnitude limited survey leads to an incompleteness due to missing optically faint star forming galaxies. Using $z<0.1$ bivariate distributions as a reference we model the higher-$z$ distributions, thereby approximating a correction for the missing optically faint star forming galaxies to the local SFR and stellar mass densities. Furthermore, we obtain the $r$-band LFs and stellar mass functions of H$α$ star forming galaxies from the bivariate LFs. As our sample is selected on the basis of detected H$α$ emission, a direct tracer of on-going star formation, this sample represents a true star forming galaxy sample, and is drawn from both photometrically classified blue and red sub-populations, though mostly from the blue population. On average 20-30% of red galaxies at all stellar mass

It has been argued that the specific star formation rates of star forming galaxies inferred from observational data decline more rapidly below z = 2 than is predicted by hierarchical galaxy formation models. We present a detailed analysis of this problem by comparing predictions from the GALFORM semi-analytic model with an extensive compilation of data on the average star formation rates of star-forming galaxies. We also use this data to infer the form of the stellar mass assembly histories of star forming galaxies. Our analysis reveals that the currently available data favour a scenario where the stellar mass assembly histories of star forming galaxies rise at early times and then fall towards the present day. In contrast, our model predicts stellar mass assembly histories that are almost flat below z = 2 for star forming galaxies, such that the predicted star formation rates can be offset with respect to the observational data by factors of up to 2-3. This disagreement can be explained by the level of coevolution between stellar and halo mass assembly that exists in contemporary galaxy formation models. In turn, this arises because the standard implementations of star formation a

Given a set of $n$ distinct real numbers, our goal is to form a symmetric, unreduced, tridiagonal, matrix with those numbers as eigenvalues. We give an algorithm which is a stable implementation of a naive algorithm forming the characteristic polynomial and then using a technique of Schmeisser.

This paper reviews the results of studies of star forming regions, carried out at the Konkoly Observatory in the last two decades. The studies involved distance determination of star-forming dark clouds, search for candidate pre-main sequence stars, and determination of the masses and ages of the candidates by spectroscopic follow-up observations. The results expanded the list of the well-studied star forming regions in our galactic environment. Data obtained by this manner may be useful in addressing several open questions related to galactic star forming processes.

The article describes the approaches for forming different predictive features of tweet data sets and using them in the predictive analysis for decision-making support. The graph theory as well as frequent itemsets and association rules theory is used for forming and retrieving different features from these datasests. The use of these approaches makes it possible to reveal a semantic structure in tweets related to a specified entity. It is shown that quantitative characteristics of semantic frequent itemsets can be used in predictive regression models with specified target variables.

We present a new model to compute the luminosity of emission lines in star forming galaxies and apply this in the semi-analytical galaxy formation code GALFORM. The model combines a pre-computed grid of HII region models with an empirical determination of how the properties of HII regions depend on the macroscopic properties of galaxies based on observations of local galaxies. The new model gives a very good reproduction of the locus of star-forming galaxies on standard line ratio diagnostic diagrams. The new model shows evolution in the locus of star forming galaxies with redshift on this line ratio diagram, with a good match to the observed line ratios at $z=1.6$. The model galaxies at high redshift have gas densities and ionisation parameters that are predicted to be $\approx 2-3$ times higher than in local star forming galaxies, which is partly driven by the changing selection with redshift to mimic the observational selection. Our results suggest that the observed evolution in emission line ratios requires other HII region properties to evolve with redshift, such as the gas density, and cannot be reproduced by HII model grids that only allow the gas metallicity and ionisation

For centuries, human civilizations devised metal forming techniques to make tools and items; yet, customized metal forming remains costly and intricate. Laser-forming origami} (lasergami) is a metal forming process where a laser beam cuts and folds a planar metal sheet to form a three-dimensional (3D) shape. Designing foldable structures formable by lasers, however, has long been a trial-and-error practice that requires significant mental effort and hinders the possibility of creating practical structures. This work demonstrates for the first time that lasergami can form a freeform set of metallic structures previously believed to have been impossible to be laser-formed. This technological breakthrough is enabled by new computational origami methods that imitate flower blooming and optimize laser folding instructions. Combined with new ideas that address laser line of sight and minimize fabrication energy, we report a low-cost manufacturing framework that can be readily adopted by hobbyists and professionals alike.

The northern Milky Way in the constellation of Cepheus (100 deg < l < 120 deg; 0 deg < b < 20 deg) contains several star forming regions. The molecular clouds of the Cepheus Flare region at b > 10 deg, are sites of low and intermediate mass star formation located between 200 and 450 pc from the Sun. Three nearby OB associations, Cep OB2, Cep OB3, Cep OB4, located at 600-800 pc, are each involved in forming stars, like the well known high mass star forming region S140 at 900 pc. The reflection nebula NGC 7129 around 1 kpc harbors young, compact clusters of low and intermediate mass stars. The giant star forming complex NGC 7538 and the young open cluster NGC 7380, associated with the Perseus arm, are located at d > 2 kpc.

The attenuation of light in star forming galaxies is correlated with a multitude of physical parameters including star formation rate, metallicity and total dust content. This variation in attenuation is even more prevalent on the kiloparsec scale, which is relevant to many current spectroscopic integral field unit surveys. To understand the cause of this variation, we present and analyse \textit{Swift}/UVOT near-UV (NUV) images and SDSS/MaNGA emission-line maps of 29 nearby ($z<0.084$) star forming galaxies. We resolve kiloparsec-sized star forming regions within the galaxies and compare their optical nebular attenuation (i.e., the Balmer emission line optical depth, $τ^l_B\equivτ_{\textrm{H}β}-τ_{\textrm{H}α}$) and NUV stellar continuum attenuation (via the NUV power-law index, $β$) to the attenuation law described by Battisti et al. The data agree with that model, albeit with significant scatter. We explore the dependence of the scatter of the $β$-$τ^l_B$ measurements from the star forming regions on different physical parameters, including distance from the nucleus, star formation rate and total dust content. Finally, we compare the measured $τ^l_B$ and $β$ between the indiv

High data rate communication with Unmanned Aerial Vehicles (UAV) is of growing demand among industrial and commercial applications since the last decade. In this paper, we investigate enhancing beam forming performance based on signal Direction of Arrival (DoA) estimation to support UAV-cellular network communication. We first study UAV fast moving scenario where we found that drone's mobility cause degradation of beam forming algorithm performance. Then, we propose a DoA estimation algorithm and a steering vector adaptive receiving beam forming method. The DoA estimation algorithm is of high precision with low computational complexity. Also it enables a beam former to timely adjust steering vector value in calculating beam forming weight. Simulation results show higher SINR performance and more stability of proposed method than traditional method based on Multiple Signal Classification (MUSIC) DoA estimation algorithm.

We study the H2 cooling emission of forming galaxies, and discuss their observability using the future infrared facility SAFIR. Forming galaxies with mass >10^11 Msun emit most of their gravitational energy liberated by contraction in molecular hydrogen line radiation, although a large part of thermal energy at virialization is radiated away by the H Ly alpha emission. For more massive objects, the degree of heating due to dissipation of kinetic energy is so great that the temperature does not drop below 10^4 K and the gravitational energy is emitted mainly by the Ly alpha emission. Therefore, the total H2 luminosity attains the peak value of about 10^42 ergs/s for forming galaxies whose total mass 10^11 Msun. If these sources are situated at redshift z=8, they can be detected by rotational lines of 0-0S(3) at 9.7 micron and 0-0S(1) at 17 micron by SAFIR. An efficient way to find such H2 emitters is to look at the Ly alpha emitters, since the brightest H2 emitters are also luminous in the Ly alpha emission.

Future power grids will be operating a large number of heterogeneous dynamical actors. Many of these will contribute to the fundamental dynamical stability of the system. By taking a complexity theoretic perspective we derive a normal form for grid forming components in power grids. This allows analyzing the grids systemic properties without the need for detailed technical models. Our approach is based on the physics of the power flow in the grid on the one hand, and on the common symmetry that is inherited from the control objectives grid-forming power grid components are trying to achieve. We provide a first experimental validation that this normal form can capture the behavior of complex grid forming inverters without any knowledge of the underlying technology, and show that it can be used to make technology independent statements on the stability of future grids.

In order to distinguish between the various components of massive star forming regions (i.e. infalling, outflowing and rotating gas structures) within our own Galaxy, we require high angular resolution observations which are sensitive to structures on all size scales. To this end, we present observations of the molecular and ionized gas towards massive star forming regions at 230 GHz from the SMA (with zero spacing from the JCMT) and at 22 and 23 GHz from the VLA at arcsecond or better resolution. These observations (of sources such as NGC7538, W51e2 and K3-50A) form an integral part of a multi-resolution study of the molecular and ionized gas dynamics of massive star forming regions (i.e. Klaassen & Wilson 2007). Through comparison of these observations with 3D radiative transfer models, we hope to be able to distinguish between various modes of massive star formation, such as ionized or halted accretion (i.e Keto 2003 or Klaassen et al. 2006 respectively).