E-commerce recommender systems strongly influence which products users consider and purchase, yet sustainability signals such as Product Carbon Footprint (PCF) are almost never available at catalog scale. We study carbon-aware product recommendation in the realistic setting where PCF labels are missing for most items and must be inferred. We first estimate product-level carbon footprints via a retrieval-augmented PCF estimation pipeline that transfers supervision from the Carbon Catalogue, a small set of life-cycle-assessed products, to a large unlabeled e-commerce catalog using semantic similarity search, few-shot LLM prompting, and a nearest-neighbour fallback. We then apply a carbon-aware post-hoc re-ranking strategy on top of relevance scores produced by three established recommendation models: BPR, NeuMF, and LightGCN. The method trades off predicted user-item engagement against estimated carbon footprint through a single tunable parameter, lambda. In this offline study, engagement is operationalized through Amazon review interactions, which serve as implicit feedback and as a proxy for user interest or purchase behavior. We evaluate the framework on the Amazon Reviews dataset
Carbon atomic wires, a linear atomic chain of sp-carbon, is theoretically predicted to have around five times higher surface area than graphene, notable charge mobilities, as well as excellent optical and thermal properties. Despite these impressive properties, the properties of sp-carbon as an electrochemical energy-storage electrode have not been reported so far. Herein, we prepare solution processed thin films of tetraphenyl[3]cumulenic sp-carbon atomic wires embedded in a polymer matrix, in which sp-carbon atomic wires feature three cumulated carbon-carbon double bonds terminated at each end by two phenyl groups. Raman and UV-visible spectroscopy are used to confirm the presence and possible degradation of sp-carbons inside the polymeric matrix. Finally, we investigate the supercapacitor performance of cumulenic sp-carbon atomic wires embedded polymer in three aqueous mediums, namely 1M Na2SO4 (neutral), 1M H2SO4 (acidic), and 6M KOH (basic). The results suggest 6M KOH is the best electrolyte to obtain high charge-storage performance of device with areal capacitance of 2.4 mF/cm2 at 20 mV/s, 85% cycle stability after 10000 charge-discharge cycles, and excellent frequency respon
Porous nanomaterials have recently attracted a lot of attention due to various properties and potential applications. In this study, carbon nanoparticles (CNPs) were synthesized by the one-pot hydrothermal carbonization (HTC) using carboxymethyl cellulose (CMC). Urea was used as the nitrogen source for carbonization. The presence of urea in CMC solution for carbonization resulted in CNPsu reduction in the diameter of particles from 4 micrometer to 1 micrometer. Activation process at high temperature for both the above samples resulted in nanoparticles with diameter of 51 nm and 31 nm, respectively. The positive effect of presence urea and its activation generated different functional groups including C-N, N-H, and C -(triple bond)- N with increasing aromatic rings that probably may help entrapment of drugs into them. On the other hand, activation CNPsu (ACNPsu) has the most aromatic rings with the lowest hydroxyl groups with 84.66% carbon and 12.29% oxygen in its structures. ACNPs, and ACNPsu exhibited a type I isotherm indicating microporous materials with a high surface area about 552.9 m2/g and 351.01 m2/g, respectively. The high surface area was characteristic of activated carb
Thermal plasma has emerged as an effective approach for producing carbon nanostructures without the need for specific catalysts nor substrates. While efforts have focused on the effect of process parameters such as reaction pressure, input power or carbon source, the intricate role and relationship with plasma characteristics like density and temperature are often overlooked due to the complexity of the environment. This study addresses this gap by establishing a correlation between process parameters, plasma characteristics, and product morphology, essential for controlling the growth of carbon nanostructures. We explored the impact of carbon precursor type (CH4 and C2H2), hydrogen, pressure, and flow rate on nanostructure formation. Using in situ optical emission spectroscopy (OES), we mapped the distribution of both temperature and dicarbon molecule (C2) density within the plasma jet. We demonstrate that the growth of low-density nanostructures, such as carbon nanohorns (CNHs), is favoured at dilute C2 local densities and high temperatures, while denser nanostructures, such as onion-like polyhedral graphitic nanocapsules (GNCs), are favoured at higher C2 densities and lower temp
Nanoporous carbon materials containing small domains of sp2-carbon with highly disordered structures are promising for supercapacitor applications. Herein, we synthesize amorphous carbon nanofoam with 98% volumetric void fraction and low mass density of around 30 mg/cm3 by pulsed laser deposition at room temperature. With the unavoidable oxygen functional groups on the nanoporous surface, carbon nanofoam and nitrogen-functionalized carbon nanofoams are directly grown on the desired substrate under different background gases (Ar, N2, N2-H2), and employed as supercapacitor electrodes. Among the background gases used in synthesis, the use of nitrogen yields nanofoam with higher thickness and more N-content with higher graphitic-N. From the test of amorphous carbon nanofoam supercapacitor device, nitrogenated amorphous carbon electrode shows a higher areal capacitance of 4.1 mF/cm2 at 20 mV/s in aqueous electrolyte, a better capacitance retention at higher current, and excellent cycle stability (98%) over 10000 charge-discharge cycles are achieved compared to not-functionalized counterpart prepared under Ar background gas (2.7 mF/cm2 and cycle stability of 88%).
Marginal Carbon Intensity (MCI) has been promoted as an effective metric for carbon-aware computing. Although it is already considered as impractical for carbon accounting purposes, many still view it as valuable when optimizing for grid flexibility by incentivizing electricity usage during curtailment periods. In this statement paper, we argue that MCI is neither reliable nor actionable for either purpose. We outline its fundamental limitations, including non-observability, reliance on opaque predictive models, and the lack of verifiability. Moreover, MCI fails to reflect curtailment caused by high-carbon sources and offers no insight into the quantity of available excess power. We advocate moving beyond MCI and instead call for research on more actionable metrics, such as direct reporting of excess power, explicit modeling of energy storage and grid stability, and integration with emerging granular renewable energy certificate markets.
We present an experimental technique for determining the pH and the total carbon concentration when \ch{CO2} diffuses and flows in water. The technique employs three different pH indicators, which, when combined with an image analysis technique, provides a dynamic range in pH from 4.0 to 9.5. In contrast to usual techniques in which a single pH indicator is used, the methodology presented allows not only to produce a binary classification (pH larger or smaller than a given threshold) but to access a much more complete continuous spatial distribution of pH and concentration levels in the system. We calibrate the method against benchmark solutions and further demonstrate its potential by measuring the pH and total carbon concentration in a density driven convection (DDC) of carbon-enriched water. The motivation for testing the method in this particular experiment comes from the fact that DDC plays a pivotal role in the efficiency of engineered carbon storage processes. The application of the technique presented here provided a direct window for the analysis of the spatial distribution of captured carbon in the DDC flow.
Energetic ion irradiation is an effective method for studying how single and multi-shelled carbon nanotubes break apart. The energy from ions is dissipated through both linear and nonlinear processes in the nanotubes, leading to defect formation. Fragmentation occurs via atomic collision cascades and thermal spikes, each described by different theoretical models. Experiments with Cs-irradiated nanotubes support these models, and an information-theoretic approach further explains the fragmentation mechanisms. Sputtered species yield probability distributions, which are analyzed using Shannon entropy and fractal dimension to assess spatial characteristics. Kullback-Leibler divergence helps identify the diversity of emission mechanisms. Together, thermal and information-theoretic models clarify and distinguish the roles of collision cascades and thermal spikes in nanotube fragmentation.
Carbon foams are hypothetical carbon allotropes that contain graphite-like (sp$^2$ carbon) segments, connected by sp$^3$ carbon atoms, resulting in porous structures. In this work the DFTB (Density Functional based Tight-Binding) method with periodic boundary conditions (PBC) was employed to study energetics, the stability and electronic properties of this unusual class of carbon systems. Concerning the most stable phases of carbon (graphite and diamond), foams show high structural stability at very low mass density. The electronic band structure and electronic DOS (density of states) of foams indicate a similar size dependence as carbon nanotubes. The calculated bulk moduli are in the range between that of graphite (5.5 GPa) and diamond (514 GPa). These structures may represent novel stable carbon modifications with sp$^2$+sp$^3$ hybridization.
In the present study, for the first time, an effort sharing approach based on Inertia and Capability principles is proposed to assess European Union (EU27) carbon budget distribution among the Member States. This is done within the context of achieving the Green Deal objective and EU27 carbon neutrality by 2050. An in-depth analysis is carried out about the role of Economic Decoupling embedded in the Capability principle to evaluate the correlation between the expected increase of economic production and the level of carbon intensity in the Member States. As decarbonization is a dynamic process, the study proposes a simple mathematical model as a policy tool to assess and redistribute Member States carbon budgets as frequently as necessary to encourage progress or overcome the difficulties each Member State may face during the decarbonization pathways.
Bottom-up on-surface synthesis enables the fabrication of carbon nanostructures with atomic precision. Good examples are graphene nanoribbons (GNRs), 1D conjugated polymers, and nanoporous graphenes (NPGs), which are gathering increasing attention for future carbon nanoelectronics. A key step is the ability to manipulate current flow within these nanomaterials. Destructive quantum interference (QI), long studied in the field of single-molecule electronics, has been proposed as the most effective way to achieve such control with molecular-scale precision. However, for practical applications, it is essential that such QI-engineering remains effective near or above room temperature. To assess this important point, here we combine large-scale molecular dynamics simulations and quantum transport calculations and focus our study on NPGs formed as arrays of laterally bonded GNRs. By considering various NPGs with different inter-GNR chemical connections we disentangle the different factors determining electronic transport in these carbon nanomaterials at 300 K. Our findings unequivocally demonstrate that QI survives at room temperature, with thermal vibrations weakly restricting current fl
Wires of sp-hybridized carbon atoms are attracting interest for both fundamental aspects of carbon science and for their appealing functional properties. The synthesis by physical vapor deposition has been reported to provide sp-rich carbon films but still needs to be further developed and understood in detail. Here the synthesis of carbon-atom wires (CAWs) has been achieved by nanosecond pulsed laser deposition (PLD) expoliting the strong out-of-equilibrium conditions occurring when the ablation plasma is confined in a background gas. Surface Enhnaced Raman scattering (SERS) spectra of deposited films indicates that CAWs are mixed with a mainly $sp^2$ amorphous carbon in a $sp-sp^2$ hybrid material. Optimal conditions for the deposition of sp-carbon phase have been investigated by changing deposition parameters thus suggesting basic mechanisms of carbon wires formation. Our proof-of-concept may open new perspectives for the targeted fabrication of CAWs and $sp-sp^2$ structures.
Long linear carbon chains encapsulated inside carbon nanotubes are a very close realization of carbyne, the truly one-dimensional allotrope of carbon. Here we study individual pairs of double-walled carbon nanotubes and encapsulated linear carbon chains by tip-enhanced Raman scattering. We observe that the radial breathing mode of the inner nanotube correlates with the frequency of the carbon chain's Raman mode, revealing that the nanotube chirality determines the vibronic and electronic properties of the encapsulated carbon chain. We provide the missing link that connects the properties of the encapsulated long linear carbon chain with the structure of the host nanotube.
In this work, we report X-ray photoelectron (XPS) and valence band (VB) spectroscopy measurements of surfactant-free silver nanoparticles and silver/linear carbon chains (Ag@LCC) structures prepared by pulse laser ablation (PLA) in water. Our measurements demonstrate significant oxidation only on the surfaces of the silver nanoparticles with many covalent carbon-silver bonds but only negligible traces of carbon-oxygen bonds. Theoretical modeling also provides evidence of the formation of robust carbon-silver bonds between linear carbon chains and pure and partially oxidized silver surfaces. A comparison of theoretical and experimental electronic structures also provides evidence of the presence of non-oxidized linear carbon chains on silver surfaces. To evaluate the chemical stability, we investigated the energetics of the physical adsorption of oxidative species (water and oxygen) and found that this adsorption is much preferrable on oxidized or pristine silver surfaces than the adsorption of linear carbon chains, which makes the initial step in the oxidation of LCC energetically unfavorable.
Based on first-principles approaches, we study the ballistic phonon transport properties of finite monatomic carbon chains stretched between graphene nanoribbons, an $sp$-$sp^2$ hybrid carbon nanostructure that has recently seen significant experimental advances in its synthesis. We find that the lattice thermal conductance anomalously increases with tensile strain for the even-numbered carbon chains that adopt the alternating bond-length polyyne configuration. On the other hand, in the odd-numbered carbon chain cases, which assume the equal bond-length cumulene configuration, phonon conductance decreases with increasing strain. We show that the strong odd-even phonon transport effects originate from the characteristic longitudinal acoustic phonon modes of carbon wires and their unique strain-induced redshifts with respect to graphene nanoribbon phonon modes. The novel phonon transport properties and their atomistic mechanisms revealed in this work will provide valuable guidelines in de-signing hybrid carbon nanostructures for next-generation electronic, bio, and energy device applications.
In addition to reducing anthropogenic emissions of CO$_2$, it is increasingly clear we also need to remove CO$_2$ from the atmosphere in order to avoid some of the worst case scenarios for climate change. Geologic sequestration of CO$_2$ is among the most attractive approaches because of the large global capacity and long-time scales for storage. One mechanism of geologic storage is through carbon mineralization. Some mafic and ultramafic rocks contain minerals that will react with CO$_2$ in a carbonation reaction and convert it to carbonated minerals. This is effectively a permanent CO$_2$ storage mechanism. The geologic question we are faced with is then to locate, delineate and estimate the volume of potentially reactive rocks. Using a synthetic model that emulates a prospective site for carbon mineralization in British Columbia, we simulate and invert gravity and magnetic data to delineate reactive rocks. We begin by inverting each data set independently and introduce a proxy experiment to contend with the challenging problem of choosing an appropriate physical-property threshold to estimate volumes from the recovered model. We use this proxy experiment to estimate thresholds f
Carbon is one of the most investigated materials and shows chaotic behavior in terms of evolving structure. Synthesizing carbon materials largely depend on the deposition technique, process parameters, condition of substrate surface and ratios of the gaseous chemistry. A variety of techniques have been employed to depositing carbon films from various gaseous mixtures to different substrate materials. In this study, carbon thin and thick films are discussed for different techniques known as hot filament chemical vapor deposition and microwave plasma chemical vapor deposition where their synthesis process has been explained in a new context. Here, we discuss attained dynamics of atoms or tiny grains amalgamating into a particular phase of grain or crystallite and electron-dynamics responsible for binding atoms in the formation of all sorts of tiny grains, grains and crystallites controlling overall morphology-structure of films thickness at few nanometers to several microns. Carbon atoms when in solid state, on amalgamation at flat surface result into bind under uniform electron-dynamics and when the amalgamation is at uneven surface, they result into bind under non-uniform electron-
The rapid outbreaks of lethal viruses necessitate the development of novel antiviral substance. Besides the conventional antiviral substances, biocompatible nanomaterials also have significant potential in combating the virus at various stages of infection. Carbon nanomaterials have an impressive record against viruses and can deal with many crucial healthcare issues. In accordance with the published literature, biocompatible carbon nanomaterials have a promising prospect as an antiviral substance. Subsequently, the antiviral properties of different carbon nanomaterials namely fullerene, carbon nanotube, carbon dot and graphene oxide have been reviewed.
Our goal in this paper is to derive a carbon-star luminosity function that will eventually be used to determine distances to galaxies at $50$-$60$ Mpc and hence yield a value of the Hubble constant. Cool N-type carbon stars exhibit redder near-infrared colours than oxygen-rich stars. Using Two Micron All Sky Survey near-infrared photometry and the Gaia Data Release 2, we identify carbon stars in the Magellanic Clouds (MC) and the Milky Way (MW). Carbon stars in the MC appear as a distinct horizontal feature in the near-infrared ($(J-K_s)_0$, $M_J$) colour-magnitude diagram. We build a colour selection ($1.4 < (J-K_s)_0 < 2$) and derive the luminosity function of the colour-selected carbon stars. We find the median absolute magnitude and the dispersion, in the J band, for the Large Magellanic Cloud and the Small Magellanic Cloud to be, respectively, ($\bar{M_J} = -6.284 \pm 0.004$, $σ= 0.352 \pm 0.005$) and ($\bar{M_J} = -6.160 \pm 0.015$, $σ= 0.365 \pm 0.014$). The difference between the MC may be explained by the lower metallicity of the Small Magellanic Cloud, but in any case it provides limits on the type of galaxy whose distance can be determined with this technique. To a
Traditionally, all superhard carbon phases including diamond are electric insulators and all conductive carbon phases including graphite are mechanically soft. Based on first-principles calculation results, we report a superhard but conductive carbon phase C21-sc which can be obtained through increasing the sp3 bonds in the previously proposed soft and conductive phase C20-sc (Phys. Rev. B 74, 172101 2006). We also show that further increase of sp3 bonds in C21-sc results in a superhard and insulating phase C22-sc with sp3 bonds only. With C20-sc, C21-sc, C22-sc and graphite, the X-ray diffraction peaks from the unidentified carbon material synthesized by compressing the mixture of tetracyanoethylene and carbon black (Carbon, 41, 1309, 2003) can be understood. In view of its positive stability, superhard and conductive features, and the strong possibility of existence in previous experiments, C21-sc is a promising multi-functional material with potential applications in extreme conditions.