We discuss efficient algorithms for the accurate forward and reverse evaluation of the discrete Fourier-Bessel transform (dFBT) as numerical tools to assist in the 2D polar convolution of two radially symmetric functions, relevant, e.g., to applications in computational biophotonics. In our survey of the numerical procedure we account for the circumstance that the objective function might result from a more complex measurement process and is, in the worst case, known on a finite sequence of coordinate values, only. We contrast the performance of the resulting algorithms with a procedure based on a straight forward numerical quadrature of the underlying integral transform and asses its efficienty for two benchmark Fourier-Bessel pairs. An application to the problem of finite-size beam-shape convolution in polar coordinates, relevant in the context of tissue optics and optoacoustics, is used to illustrate the versatility and computational efficiency of the numerical procedure.
Single-photon avalanche diode (SPAD) arrays are solid-state detectors offering imaging capabilities at the level of individual photons, with unparalleled photon counting and time-resolved performance. This fascinating technology has progressed at very high pace in the past 15~years, since its inception in standard CMOS technology in 2003. A host of architectures has been explored, ranging from simpler implementations, based solely on off-chip data processing, to progressively ``smarter" sensors including on-chip, or even pixel-level, timestamping and processing capabilities. As the technology matured, a range of biophotonics applications has been explored, including (endoscopic) FLIM, (multi-beam multiphoton) FLIM-FRET, SPIM-FCS, super-resolution microscopy, time-resolved Raman, NIROT, and PET. We will review some representative sensors and their corresponding applications, including the most relevant challenges faced by chip designers and end-users. Finally, we will provide an outlook on the future of this fascinating technology.
Droplet microlasers, as promising tools for biophotonics and biomedical sciences, have witnessed rapid advances due to their flexible reconfigurability, high sensitivity to stimuli, and label-free biosensing ability. However, designing these biosensors with simultaneously critical properties of low lasing threshold, high spectral purity, and ultimate sensitivity remains challenging. Here, we propose a versatile strategy to build liquid photonic molecules (LPMs) that combine all these features in a single device. We find that through tailoring the spectral Vernier overlap in size-mismatched droplets, this device enables single-mode lasing with a low threshold of ~610 nJ mm-2. The LPM lasers are engineered for dynamic tunability using a molecular isomerization strategy, which induces spectral mode hopping and thus yields a nearly ten-fold enhancement in spectral sensitivity over single droplets. Moreover, by leveraging the self-referenced intensity response of the LPM lasing modes, we demonstrate a three-orders-of-magnitude enhancement in biomolecular sensing, with a detection limit of 30 aM and a dynamic range spanning nine orders of magnitude. Our work offers exciting prospects for
Optical forces - studied since the earliest days of laser physics - continue to reveal rich dynamics and enable powerful tools for manipulation of objects on micro- and nanoscales, and even individual atoms. Lateral optical forces, which act perpendicular to the direction of beam propagation, are particularly intriguing but have largely been restricted to interface geometries such as air - water boundaries. Here, we realize tunable lateral optical force entirely within a fluid environment by using Janus particles: dielectric microspheres half-coated with gold. We show that the lateral optical force arises from scattering asymmetry induced by the asymmetric structure of the particles; it can be tuned by adjusting the polarization angle of a linearly polarized beam, but also particle parameters including their size and orientation. Experimentally, we directly observe fully reversible lateral propulsion of Janus particles in water merely by rotating the polarization direction, in excellent agreement with theoretical predictions. These results establish a new mechanism for programmable, polarization-controlled optical manipulation, with promising implications for biophotonics, microflu
Biophotonic signaling via axons has been proposed as a potential mode of neural communication, where information might be encoded not only in photon number and wavelength but also in polarization. Although earlier computational studies have examined how structural imperfections influence optical transmission, their effects on polarization fidelity remain unexplored; previous modeling of polarization fidelity in myelinated axons has largely focused on idealized geometries. This study incorporates three structural imperfections characteristic of axons in vivo: variation in myelin thickness, non-circular cross-sectional geometry, and axonal bending, within a model that includes four nodes of Ranvier. We find that variation in myelin thickness alone has minimal impact on fidelity, while non-circular cross-sections show strong mode dependence. Axonal bending has the most significant influence, generating large fluctuations and deep fidelity dips. When all imperfections are combined in a single axon model, the simulations show substantial drops in fidelity, yet certain modes exhibit recovery, with repeated revivals reaching values of around 0.8, which exceeds the revivals observed in the
Ultraweak photon emission, also referred to as biological autoluminescence or biophoton emission, is the spontaneous emission of extremely low levels of light from a broad range of biological systems. Recent studies have reported that UPE measured extracranially can serve as a potential non-invasive biomarker of brain activity. Here, we show that this interpretation suffers from serious problems. We show that, when observed under properly dark conditions, the UPE from the head is much weaker than what is reported in certain papers on 'brain UPE' from human heads. We also show that the large signals reported in these studies can be explained by background light contamination. Furthermore, photons with wavelengths < 600 nm are strongly attenuated by scalp and skull tissues, and longer wavelengths fall largely outside the effective spectral sensitivity of the photomultiplier tubes (PMTs) used. As a consequence, even if UPE from the head is detected under properly background-free conditions, it is likely to be dominated by emission from the scalp rather than from the brain, certainly as long as PMTs are used. Our results emphasize the importance of careful experimental design to mak
Biophotons are ultra-weak photon emissions in the visible spectrum produced by living organisms. While extensively studied in plants, germinating seeds, and cell cultures, no systematic multi-method complexity analysis of human ultraweak photon emission (UPE) under physiological modulation has been reported. We address this gap by applying a comprehensive analytical framework to UPE measurements from the right palm of a human subject. Three independent sessions were conducted on different days, each comprising four consecutive 15-minute phases: Dark reference, pre-meditation resting state (Pre), structured meditation based on the Sama Vritti box-breathing protocol, and post-meditation recovery (Post). Photon count series are analysed with four complementary methods: distributional statistics (Fano factor, skewness, tail Expected Shortfall); multiscale Fano factor and Allan deviation; stripe-filtered Diffusion Entropy Analysis (DEA); and Renyi entropy with a Time Reversal test. The methods show complementary sensitivities, converging on a coherent picture: a systematic reduction of emission intermittency during meditation, consistently detected across all three sessions. Stripe-filt
Advances in silicon (Si) photonics at submicrometer wavelengths are unlocking new opportunities to realize miniaturized, scalable optical systems for biophotonics, quantum information, imaging, spectroscopy, and displays. Addressing this array of applications with a single integrated photonics technology requires the development of high-performance active components compatible with both visible and near-infrared light. Here, we report waveguide-coupled photodetectors monolithically integrated in a foundry-fabricated, short-wavelength, Si photonics platform. We demonstrate two detector variants that collectively cover a continuous wavelength span of $λ=$ 400 - 955 nm. The devices exhibited external quantum efficiencies exceeding 60% and 12% over 400 - 748 nm and 749 - 955 nm wavelength ranges, respectively. Measured dark currents were $<$ 2 pA at a 2 V reverse bias. High-speed measurements at $λ=$ 785 nm demonstrated optoelectronic bandwidths up to 18 GHz. Avalanche operation was characterized, yielding a gain-bandwidth product of 374 GHz.
The photophysical properties of deoxyribonucleic acid (DNA) are fundamental to life sciences and biophotonics. While previous studies have generally been restricted to fluorescence, attributing it to pi-pi* transitions and charge transfer within nucleobases in dilute solution, these understandings fail to explain the pronounced visible emission in physiological and aggregated states, and moreover, ignore the possible phosphorescence. Addressing this critical gap, we systematically investigate native DNA across its structural hierarchy, from nucleobases to single-stranded chains, under varying states. We demonstrate that DNA exhibits excitation-dependent emission in aggregates and moreover room-temperature phosphorescence (RTP) in the solid state. These behaviors are rationalized by the clustering-triggered emission (CTE) mechanism, where nucleobases and electron-rich nonaromatic moieties like sugar and phosphate synergistically contribute to DNA photophysics. High-pressure experiments reveal a 207-fold luminescence enhancement for nucleotides at 26 GPa, largely retained after decompression, underscoring the precise control of emission by intermolecular interactions. This study not
Biophotons are non-thermal and non-bioluminescent ultraweak photon emissions, first hypothesised by Gurwitsch in 1924 as a regulatory mechanism in cell division, and then experimentally observed in living organisms. Today, two main hypotheses explain their origin: stochastic decay of excited molecules and coherent electromagnetic fields produced in biochemical processes. Recent interest focuses on the role of biophotons in cellular communication and disease monitoring. This study presents the first campaign of biophoton emission measurements from cultured astrocytes and glioblastoma cells, conducted at Fondazione Pisana per la Scienza (FPS) using two ultra-sensitive setups developed by the collaboration at the National Laboratories of Frascati (LNF-INFN) and at the University of Rome II - Tor Vergata. The statistical analyses of the data collected revealed a clear separation between cellular signals and dark noise, confirming the high sensitivity of the apparatuses. The Diffusion Entropy Analysis (DEA) was applied to the data to uncover dynamic patterns, revealing anomalous diffusion and long-range memory effects potentially related to intercellular signalling and cellular communic
Point spread function (PSF) engineering is vital for precisely controlling the focus of light in computational imaging, with applications in neural imaging, fluorescence microscopy, and biophotonics. The PSF is derived from the magnitude of the Fourier transform of a phase function, making the construction of the phase function given the PSF (PSF engineering) an ill-posed inverse problem. Traditional PSF engineering methods rely on physical basis functions, limiting their ability to generalize across the range of PSFs required for imaging tasks. We introduce a novel approach leveraging implicit neural representations that overcome the limitations of pixel-wise optimization methods. Our approach achieves a median MSSIM of 0.8162 and a mean MSSIM of 0.5634, compared to a median MSSIM of 0.0 and a mean MSSIM of 0.1841 with pixel-wise optimization when learning randomly generated phase functions. Our approach also achieves a median PSNR of 10.38 dB and a mean PSNR of 8.672 dB, compared to a median PSNR of 6.653 dB and a mean PSNR of 6.660 dB with pixel-wise optimization for this task.
Optical modulators in the visible regime have far-reaching applications from biophotonics to quantum science. Implementations of such optical phase modulators on a complementary metal-oxide-semiconductor (CMOS) compatible platform have been mainly limited to utilization of the thermo-optic effect, liquid crystal technology, as well as piezo-optomechanical effects. Despite excellent performance, the demonstrations using the thermo-optic effect and liquid crystal technology both suffer from limited modulation speed. Moreover, the demonstrations utilizing piezo-optomechanical effects, require very large footprints due to a weak modulation efficiency. Here, we report the demonstration of the first highly scalable compact CMOS-compatible phase modulator in the visible regime based on altering the refractive index of an indium-tin oxide capacitive stack over a Si${_3}$N${_4}$ waveguide through the charge accumulation effect. The implemented modulator achieves a two orders-of-magnitude larger bandwidth compared to thermo-optic and liquid crystal based counterparts and close to 3 orders-of-magnitude higher modulation efficiency with about two orders-of-magnitude smaller footprint compared
About a hundred years ago the Russian biologist A. Gurwitsch, based on his experiments with onion plants by measuring their growth rate, made the hypothesis that plants emitted a weak electromagnetic field which somehow influenced cell growth. This interesting observation remained fundamentally ignored by the scientific community and only in the 1950s the electromagnetic emission from some plants was measured using a photomultiplier used in single counting mode. Later, in the 80s several groups in the world started some extensive work to understand the origin and role of this ultra-weak emission, hereby called biophotons, coming from living organisms. Biophotons are an endogenous very small production of photons in the visible energy range in and from cells and organism, and this emission is characteristic of alive organisms. Today there is no doubt that biophotons really exist, this emission has in fact been measured by many groups and on many different living organisms, from humans to bacteria. On the contrary, the origin of biophotons and whether organisms use them in some way to exchange information is not yet well known; no model proposed since now is really capable of reprodu
Thin film interference is integral to modern photonics and optoelectronics, e.g. allowing for precise design of high performance optical filters, efficiency enhancements in photovoltaics and light-emitting devices, as well as the realization of microlasers and high-performance photodetectors. However, interference inevitably leads to a change of spectral characteristics with angle, which is generally undesired and can limit the usefulness of thin-film coatings and devices. Here, we introduce a strategy to overcome this fundamental limit in optics by utilizing and tuning the exciton-polariton modes arising in ultra-strongly coupled microcavities. We demonstrate optical filters with narrow pass bands that shift by less than their half width (<15 nm) even at extreme angles. Our filters cover the entire visible range and surpass comparable metal-dielectric-metal filters in all relevant metrics. By expanding this strategy to strong coupling with the photonic sidebands of dielectric multilayer stacks, we also obtain filters with high extinction ratios and up to 98% peak transmission. Based on these findings, we realize ultrathin and flexible narrowband filter films, monolithically int
The integration of deep learning techniques with biophotonic setups has opened new horizons in bioimaging. A compelling trend in this field involves deliberately compromising certain measurement metrics to engineer better bioimaging tools in terms of cost, speed, and form-factor, followed by compensating for the resulting defects through the utilization of deep learning models trained on a large amount of ideal, superior or alternative data. This strategic approach has found increasing popularity due to its potential to enhance various aspects of biophotonic imaging. One of the primary motivations for employing this strategy is the pursuit of higher temporal resolution or increased imaging speed, critical for capturing fine dynamic biological processes. This approach also offers the prospect of simplifying hardware requirements/complexities, thereby making advanced imaging standards more accessible in terms of cost and/or size. This article provides an in-depth review of the diverse measurement aspects that researchers intentionally impair in their biophotonic setups, including the point spread function, signal-to-noise ratio, sampling density, and pixel resolution. By deliberately