搜索结果：X-ray

X-ray appearance of normal galaxies is mainly determined by X-ray binaries powered by accretion onto a neutron star or a stellar mass black hole. Their populations scale with the star-formation rate and stellar mass of the host galaxy and their X-ray luminosity distributions show a significant split between star-forming and passive galaxies, both facts being consequences of the dichotomy between high- and low-mass X-ray binaries. Metallicity, IMF and stellar age dependencies, and dynamical formation channels add complexity to this picture. The numbers of high-mass X-ray binaries observed in star-forming galaxies indicate quite high probability for a massive star to become an accretion powered X-ray source once upon its lifetime. This explains the unexpectedly high contribution of X-ray binaries to the Cosmic X-ray Background, of the order of $\sim 10\%$, mostly via X-ray emission of faint star-forming galaxies located at moderate redshifts which may account for the unresolved part of the CXB. Cosmological evolution of the $L_X-{\rm SFR}$ relation can make high-mass X-ray binaries a potentially significant factor in (pre)heating of intergalactic medium in the early Universe.

We review the current status of studies of large-scale structure in the X-ray Universe. After motivating the use X-rays for cosmological purposes, we discuss the various approaches used on different angular scales including X-ray background multipoles, cross-correlations of the X-ray background with galaxy catalogues, clustering of X-ray selected sources and small-scale fluctuations and anisotropies in the X-ray background. We discuss the implications of the above studies for the bias parameter of X-ray sources, which is likely to be moderate for X-ray selected AGN and the X-ray background (~1-2). We finally outline how all-sky X-ray maps at hard X-rays and medium surveys with large sky coverage could provide important tests for the cosmological models.

Binary systems in which a neutron star or black hole accretes material from a high-mass star are known as high-mass X-ray binaries (HMXBs). This chapter provides a brief introduction to the physics of wind accretion and an observational view of HMXBs, including their classification, X-ray spectra, X-ray variability, orbital and compact object properties, as well as studies of Galactic and Magellanic HMXB populations. Two classes of X-ray sources whose possible connections to HMXBs have been debated, ultraluminous X-ray sources and gamma-ray binaries, are also discussed. Approximately 300 HMXBs residing either in the Milky Way or the Magellanic Clouds have been discovered. The majority of these HMXBs host wind-accreting neutron stars. Their X-ray properties depend both on the interaction of the accreting material with the neutron star's strong magnetic field and the properties of the donor star's wind. Most HMXBs are classified as either supergiant XBs or Be XBs based on the spectral type of the donor star; these classes exhibit different patterns of X-ray variability and occupy different phase space in diagrams of neutron star spin versus orbital period. While studies of HMXBs in t

We discuss three classes of x-ray transients to highlight three new types of transients found with the Wide Field Cameras onboard BeppoSAX. First there are the transients related to Low Mass X-ray Binaries in outburst, typically lasting weeks to months and reaching luminosities of the Eddington limit for a few solar masses. Recently another subclass of outbursts in such binaries has been discovered, which are an order of magnitude fainter and last shorter than typical hours to days. We discuss whether they constitute a separate subset of x-ray binaries. A second class of x-ray transients are the x-ray bursts. Thermonuclear explosions on a neutron star (type I x-ray bursts) usually last of order minutes or less. We discovered a second type (called super x-ray bursts) with a duration of several hours. They relate to thermonuclear detonations much deeper in the neutron star atmosphere, possibly burning on the nuclear ashes of normal x-ray bursts. The third class are the enigmatic Fast X-ray Transients occurring at all galactic latitudes. We found that the bright ones are of two types only: either nearby coronal sources (lasting hours) or the socalled x-ray flashes (lasting minutes). T

X-ray, known for its ability to reveal internal structures of objects, is expected to provide richer information for 3D reconstruction than visible light. Yet, existing neural radiance fields (NeRF) algorithms overlook this important nature of X-ray, leading to their limitations in capturing structural contents of imaged objects. In this paper, we propose a framework, Structure-Aware X-ray Neural Radiodensity Fields (SAX-NeRF), for sparse-view X-ray 3D reconstruction. Firstly, we design a Line Segment-based Transformer (Lineformer) as the backbone of SAX-NeRF. Linefomer captures internal structures of objects in 3D space by modeling the dependencies within each line segment of an X-ray. Secondly, we present a Masked Local-Global (MLG) ray sampling strategy to extract contextual and geometric information in 2D projection. Plus, we collect a larger-scale dataset X3D covering wider X-ray applications. Experiments on X3D show that SAX-NeRF surpasses previous NeRF-based methods by 12.56 and 2.49 dB on novel view synthesis and CT reconstruction. Code, models, and data are released at https://github.com/caiyuanhao1998/SAX-NeRF

Astronomical X-ray polarimetry was first explored in the end of the 60's by pioneering rocket instruments. The craze arising from the first discoveries on stellar and supernova remnant X-ray polarization led to the addition of X-ray polarimeters on-board of early satellites. Unfortunately, the inadequacy of the diffraction and scattering technologies required to measure polarization with respect to the constraints driven by X-ray mirrors and detectors, coupled to long integration times, slowed down the field for almost 40 years. Thanks to the development of new, highly sensitive, compact X-ray polarimeters in the beginning of the 2000's, the possibility to observe astronomical X-ray polarization is rising again and scientists are now ready to explore the high energy sky thanks to modern X-ray polarimeters. In the forthcoming years, several X-ray missions (both rockets, balloons and satellites) will open a new observational windows. A wind of renewal blows over the area of X-ray polarimetry and this paper presents for the first time a quantitative assessment, all based on scientific literature, of the growth of interest for astronomical X-ray polarimetry.

Nearly all types of massive stars with radiatively driven stellar winds are X-ray sources that can be observed by the presently operating powerful X-ray telescopes. In this review I briefly address recent advances in our understanding of stellar winds obtained from X-ray observations. The winds of OB dwarfs with subtypes later than O9V may be predominantly in a hot phase, and X-ray observations offer the best window for their studies. The X-ray properties of OB supergiants are largely determined by the effects of radiative transfer in their clumped stellar winds. The recently suggested method to directly measure mass-loss rates of O stars by fitting the shapes of X-ray emission lines is considered but its validity cannot be confirmed. To obtain robust quantitative information on stellar wind parameters from X-ray spectroscopy, a multiwavelength analysis by means of stellar atmosphere models is required. Independent groups are now performing such analyses with encouraging results. Joint analyses of optical, UV, and X-ray spectra of OB supergiants yield consistent mass-loss rates. Depending on the adopted clumping parameters, the empirically derived mass-loss rates are comparable (wi

X-ray mirror fabrication for astronomy is challenging; this is due to the Wolter I optical geometry and the tight tolerances on roughness and form error to enable accurate and efficient X-ray reflection. The performance of an X-ray mirror, and ultimately that of the telescope, is linked to the processes and technologies used to create it. The goal of this chapter is to provider the reader with an overview of the different technologies and processes used to create the mirrors for X-ray telescopes. The objective is to present this diverse field in the framework of the manufacturing methodologies (subtractive, formative, fabricative & additive) and how these methodologies influence the telescope attributes (angular resolution and effective area). The emphasis is placed upon processes and technologies employed in recent X-ray space telescopes and those that are being actively investigated for future missions such as Athena and concepts such as Lynx. Speculative processes and technologies relating to Industry 4.0 are introduced to imagine how X-ray mirror fabrication may develop in the future.

Background: X-ray imaging is widely used for the non-destructive detection of defects in industrial products on a conveyor belt. In-line detection requires highly accurate, robust, and fast algorithms. Deep Convolutional Neural Networks (DCNNs) satisfy these requirements when a large amount of labeled data is available. To overcome the challenge of collecting these data, different methods of X-ray image generation are considered. Objective: Depending on the desired degree of similarity to real data, different physical effects should either be simulated or can be ignored. X-ray scattering is known to be computationally expensive to simulate, and this effect can greatly affect the accuracy of a generated X-ray image. We aim to quantitatively evaluate the effect of scattering on defect detection. Methods: Monte-Carlo simulation is used to generate X-ray scattering distribution. DCNNs are trained on the data with and without scattering and applied to the same test datasets. Probability of Detection (POD) curves are computed to compare their performance, characterized by the size of the smallest detectable defect. Results: We apply the methodology to a model problem of defect detection

Radiation from X-ray pulsars (XRPs) was expected to be strongly linearly polarized owing to a large difference in their ordinary and extraordinary mode opacities. The launch of IXPE allowed us to check this prediction. IXPE observed a dozen X-ray pulsars, discovering pulse-phase dependent variation of the polarization degree (PD) and polarization angle (PA). Although the PD showed rather erratic profiles resembling flux pulse dependence, the PA in most cases showed smooth variations consistent with the rotating vector model (RVM), which can be interpreted as a combined effect of vacuum birefringence and dipole magnetic field structure at a polarization-limiting (adiabatic) radius. Application of the RVM allowed us to determine XRP geometry and to confirm the free precession of the NS in Her X-1. Deviations from RVM in two bright transients led to the discovery of an unpulsed polarized emission likely produced by scattering off the accretion disk wind.

The Jovian system is a treasure trove of X-ray sources: diverse and dynamic atmospheric and auroral emissions, diffuse radiation belt and Io torus emissions, and plasma-surface interactions with Jupiter's moons. The system is a rich natural laboratory for astronomical X-rays with each region showcasing its own X-ray production processes: scattering and fluorescence of solar corona emissions; charge exchange emissions from energetic ions; Inverse-Compton, thermal and non-thermal bremsstrahlung emissions from relativistic electrons; and fingerprint fluorescence lines indicative of elemental composition and the potential for life on the Galilean satellites. For the high energy astrophysics domain, perhaps Jupiter's greatest attribute is the opportunity to connect observed X-ray emissions with in-situ plasma and magnetic field measurements of the precise physical processes that lead to them - irreplaceable ground truths for systems that cannot be visited in-situ. Such simultaneous studies have revealed that Jupiter's spectacular soft X-ray flares and pulsations are produced by wave-particle interactions, while the bremsstrahlung aurorae vary with magnetodisk reconnection and dipolarisa

We present analysis of a second observation of the young planetary nebula (PN) NGC 7027 by the Chandra X-ray Observatory. This latest 59.2 ks exposure with ACIS-S was acquired approximately 14 years after the initial 18.2 ks ACIS-S observation, and the improved photon statistics allow us to perform a detailed spatial and spectral analysis of the X-ray emission. Comparison with multiwavelength imaging of NGC 7027 reveals a strong anti-correlation between extinction across the nebula and the soft band X-ray emission. Dissecting the X-ray emission into low- and high-extinction regions results in more robust characterization of the plasma spectral properties. We determine that the X-ray emitting plasma has a temperature of $\sim3.6$ MK, is deficient in Fe, and has an X-ray luminosity of $L_{\rm X}\sim7\times10^{31}{\rm ~erg~s}^{-1}$, all of which are generally consistent with the plasma properties found in PN hot bubbles. We find no evidence of evolution in the X-ray surface brightness over the 14 year baseline between Chandra observations. Our analysis underscores the importance of accounting for nebular absorption of the X-ray emission in accurately determining plasma properties for

From hot, tenuous gas dominated by Compton processes, to warm, photoionized emission-line regions, to cold, optically thick fluorescing matter, accreting gas flows in X-ray binaries span a huge portion of the parameter space accessible to astrophysical plasmas. The coexistence of such diverse states of material within small volumes (10^33-10^36 cm^3) leaves X-ray spectroscopists with a challenging set of problems, since all such matter produces various X-ray spectral signatures when exposed to hard X rays. Emission-line regions in X-ray binaries are characterized by high radiation energy densities, relatively high particle densities, and velocities ~1000 km/s. In this article, we describe some recent efforts to generate detailed X-ray line spectra from models of X-ray binaries, whose aims are to reproduce spectra acquired with the ASCA, Chandra, and XMM-Newton observatories. With emphasis on the global nature of X-ray line emission in these systems, the article includes separate treatments of high-mass and low-mass systems, as well as summaries of continuum spectroscopy

Grazing-incidence X-ray optics have revolutionized X-ray astrophysics. The ability to concentrate flux to a tiny detection region provides a dramatic reduction in background and a consequent very large improvement in sensitivity. The X-ray optics also permit use of small-format, high-performance focal plane detectors and, of course, especially for high-angular-resolution optics, provide a wealth of imaging data from extended sources. This review, follows the use of X-ray optics from the first rocket-borne instruments in the 1960s through to the Observatories flying today and being developed for future use. It also includes a brief overview of the challenges of fabricating X-ray optics and the various technologies that have been used to date

Soon after the discovery of the first extrasolar X-Ray sources it was suggested that polarimetry could play a major role as a diagnostic tool. Attempts to measure polarization of X-Ray sources was performed by the team of Columbia University lead by Robert Novick. The technique of Bragg diffraction at 45° was successful to detect the polarization of the Crab with rockets and with OSO-8 satellite. In the following evolution of X-Ray Astronomy, Polarimetry was too mismatched with the improved sensitivity of imaging and spectroscopy, based on the use of optics. As a consequence no polarimeter was flown any more. At the beginning of the century a new class of instruments based on the photoelectric effect were developed. In the focus of an X-Ray telescope they can perform angular, energy and time resolved polarimetry and benefit of the large increase of sensitivity due to the optics. The Imaging X-Ray Polarimetry Explorer, exploiting this technique, was launched at the end of 2021.

Most types of massive stars display X-ray emission that is affected by the properties of their stellar winds. Single non-magnetic OB stars have an X-ray luminosity that scales with their bolometric luminosity and their emission is thought to arise from a distribution of wind-embedded shocks. The lack of significant short-term stochastic variability indicates that the winds consist of a large number of independent fragments. Detailed variability studies unveiled a connection between the photosphere and the wind: well-studied O-type stars exhibit a ~ 10% modulation of their emission on timescales consistent with the rotation period, and a few early B-type pulsators display ~ 10% modulations of their X-ray flux with the pulsation period. Unlike OB stars, their evolved descendants (WR and LBV stars) lack a well-defined relation between their X-ray and bolometric luminosities, and several subcategories of objects remain undetected. These properties most likely stem from the combined effects of wind optical depth and wind velocity. Magnetic OB stars display an enhanced X-ray emission frequently modulated by the rotation of the star. These properties are well explained by the magnetically

The Spectrometer/Telescope for Imaging X-rays (STIX) is one of the 10 instruments on-board the scientific payload of ESA's Solar Orbiter mission. STIX provides hard X-ray imaging spectroscopy in the 4-150~keV energy range, observing hard X-ray bremsstrahlung emission from the Sun. These observations provide diagnostics of the hottest thermal plasmas ($>$10~MK) and information on the non-thermal energetic electrons accelerated above 10~keV during solar flares. STIX has a spectral resolution of 1~keV, and employs the use of in-direct bi-grid Fourier imaging to spatially locate hard X-ray emission. Given that STIX provides critical information about accelerated electrons at the Sun through hard X-ray diagnostics, it is a powerful contribution to the Solar Orbiter suite and has a significant role to explore the dynamics of solar inputs to the heliosphere. This chapter describes the STIX instrument, its design, objectives, first observations and outlines the new perspectives STIX provides over the mission lifetime of Solar Orbiter.

This chapter describes the history, principles, and recent developments of large field of view X-ray optics based on lobster eye designs. Most of grazing incidence (reflective) X-ray imaging systems used in astronomy and other applications, are based on the Wolter 1 (or modified) arrangement. But there are also other designs and configurations proposed for future applications for both laboratory and space environments. Kirkpatrick-Baez (K-B) based lenses as well as various types of lobster eye optics serve as an example. Analogously to Wolter lenses, all these systems use the principle that the X-rays are reflected twice to create focal images. Various future projects in X-ray astronomy and astrophysics will require large optics with wide fields of view. Both large Kirkpatrick-Baez modules and lobster eye X-ray telescopes may serve as solutions as these can offer innovations such as wide fields of view, low mass and reduced costs. The basic workings of lobster eye optics using Micro Pore Optics (MPOs) and their various uses are discussed. The issues and limiting factors of these optics are evaluated and current missions using lobster eye optics to fulfil their science objectives ar

Arcus is a concept for a probe class mission to deliver high-resolution FUV and X-ray spectroscopy. For X-rays, it combines cost-effective silicon pore optics (SPO) with high-throughput critical-angle transmission (CAT) gratings to achieve $R> 3000$ in a bandpass from 12-50 Angstroem. We show in detail how the X-ray and the UV spectrographs (XRS and UVS) on Arcus will be aligned to each other. For XRS we present ray-tracing studies to derive performance characteristics such as the spectral resolving power and effective area, study the effect of misalignments on the performance, and conclude that most tolerances can be achieved with mechanical means alone. We also present an estimate of the expected on-orbit background.