Federated learning (FL) has emerged as a promising framework for distributed learning, enabling collaborative model training without sharing private data. Existing wireless FL works primarily adopt two communication strategies: (1) over-the-air (OTA) computation, which exploits wireless signal superposition for simultaneous gradient aggregation, and (2) digital communication, which allocates orthogonal resources for gradient uploads. Prior works on both schemes typically assume \emph{homogeneous} wireless conditions (equal path loss across devices) to enforce zero-bias updates or permit uncontrolled bias, resulting in suboptimal performance and high-variance model updates in \emph{heterogeneous} environments, where devices with poor channel conditions slow down convergence. This paper addresses FL over heterogeneous wireless networks by proposing novel OTA and digital FL updates that allow a structured, time-invariant model bias, thereby reducing variance in FL updates. We analyze their convergence under a unified framework and derive an upper bound on the model ``optimality error", which explicitly quantifies the effect of bias and variance in terms of design parameters. Next, to
Wireless power transfer has the potential to seamlessly power electronic systems, such as electric vehicles, industrial robots, and mobile devices. However, the leakage magnetic field is a critical bottleneck that limits the transferable power level, and heavy ferromagnetic shields are needed for transferring large amounts of power. In this paper, we propose a ferrite-less coil design that generates an asymmetric magnetic field pattern focused on one side of the resonator, which effectively reduces the leakage magnetic field. The key to enabling the asymmetric field pattern is a coil winding strategy inspired by the Halbach array, a permanent magnet arrangement, which is then tailored for wireless power using an evolutionary strategy algorithm. Numerical analyses and simulations demonstrated that the proposed coil structure delivers the same amount of power as spiral coils, while achieving an 86.6% reduction in magnetic field intensity at a plane located 75 mm away from the resonator pair and a power efficiency of 96.0%. We verified our approach by measuring the power efficiency and magnetic field intensity of a test wireless power system operating at 6.78 MHz. These findings indic
Wireless charging is a promising way to power wireless nodes' transmissions. This paper considers new dual-function access points (APs) which are able to support the energy/information transmission to/from wireless nodes. We focus on a large-scale wireless powered communication network (WPCN), and use stochastic geometry to analyze the wireless nodes' performance tradeoff between energy harvesting and information transmission. We study two cases with battery-free and battery-deployed wireless nodes. For both cases, we consider a harvest-then-transmit protocol by partitioning each time frame into a downlink (DL) phase for energy transfer, and an uplink (UL) phase for information transfer. By jointly optimizing frame partition between the two phases and the wireless nodes' transmit power, we maximize the wireless nodes' spatial throughput subject to a successful information transmission probability constraint. For the battery-free case, we show that the wireless nodes prefer to choose small transmit power to obtain large transmission opportunity. For the battery-deployed case, we first study an ideal infinite-capacity battery scenario for wireless nodes, and show that the optimal cha
The vision of a smart wireless factory (SWF) demands highly flexible, low-latency, and reliable connectivity that goes beyond conventional wireless solutions. Reconfigurable intelligent surface (RIS)-empowered communications, when integrated with the open radio access network (O-RAN) architectures, have emerged as a promising enabler to meet these challenging requirements. This article introduces the methodology for the orchestration of RIS with xApps (ORIX), bringing the RIS technology into the O-RAN ecosystem through xApp-based control for SWF environments. ORIX features three key components: an O-RAN-compliant RIS service model for dynamic configuration, an RIS channel simulator that supports 3GPP indoor factory models with multiple industrial scenarios, and practical RIS optimization strategies with finite-resolution control. Together, these elements provide a realistic end-to-end emulation platform for evaluating RIS placement, control, and performance in SWF environments prior to deployment. The presented case study demonstrates how ORIX enables the evaluation of achievable performance gains, exploration of trade-offs among key RIS design parameters, and identification of dep
Wireless Unmanned Aerial Vehicles (UAVs) were introduced in the world of 4th generation networks (4G) as cellular users, and have attracted the interest of the wireless community ever since. In~5G, UAVs operate also as flying Base Stations providing service to ground users. They can also implement independent off-the-grid UAV networks. In~6G networks, wireless UAVs will connect ground users to in-orbit wireless infrastructure. As the design and prototyping of wireless UAVs are on the rise, the time is ripe for introducing a more precise definition of what is a wireless UAV. In doing so, we revise the major design challenges in the prototyping of wireless UAVs for future 6G spectrum research. We then introduce a new wireless UAV prototype that addresses these challenges. The design of our wireless UAV prototype will be made public and freely available to other researchers.
The dynamic allocation of spectrum in 5G / 6G networks is critical to efficient resource utilization. However, applying traditional deep reinforcement learning (DRL) is often infeasible due to its immense sample complexity and the safety risks associated with unguided exploration, which can cause severe network interference. To address these challenges, we propose a meta-learning framework that enables agents to learn a robust initial policy and rapidly adapt to new wireless scenarios with minimal data. We implement three meta-learning architectures, model-agnostic meta-learning (MAML), recurrent neural network (RNN), and an attention-enhanced RNN, and evaluate them against a non-meta-learning DRL algorithm, proximal policy optimization (PPO) baseline, in a simulated dynamic integrated access/backhaul (IAB) environment. Our results show a clear performance gap. The attention-based meta-learning agent reaches a peak mean network throughput of 48 Mbps, while the PPO baseline decreased drastically to 10 Mbps. Furthermore, our method reduces SINR and latency violations by more than 50% compared to PPO. It also shows quick adaptation, with a fairness index 0.7, showing better resource a
Wireless Mesh Network (WMN) is surely one of the prominent networks in the modern era which is widely used in numerous evolving applications, viz. broadband home networking (BHN), community and neighbourhood networks (CNN), coordinated network management (CNM), and intelligent transportation systems (ITS), etc. It is a wireless network (WN) with multi-hop formed by many fixed wireless mesh routers (WMR) that are connected wirelessly with a mesh-alike backbone arrangement. In the IEEE 802.11s network, the node selection, scalability, stability, density of the nodes, mobility of the nodes, transmission power, and routing are major issues that WMN suffers. In this paper, a critical review of MAC protocols and their Quality of Service (QoS) parameters for WMN is presented to attain a better understanding of MAC protocols. Furthermore, the critical comparative analysis and recommendation of MAC procedures for WMN using Multi-objective optimization and statistical testing framework are performed. This framework is used for the analysis and recommendation of different protocols available for QoS parameters.
In this paper, the problem of training federated learning (FL) algorithms over a realistic wireless network is studied. In particular, in the considered model, wireless users execute an FL algorithm while training their local FL models using their own data and transmitting the trained local FL models to a base station (BS) that will generate a global FL model and send it back to the users. Since all training parameters are transmitted over wireless links, the quality of the training will be affected by wireless factors such as packet errors and the availability of wireless resources. Meanwhile, due to the limited wireless bandwidth, the BS must select an appropriate subset of users to execute the FL algorithm so as to build a global FL model accurately. This joint learning, wireless resource allocation, and user selection problem is formulated as an optimization problem whose goal is to minimize an FL loss function that captures the performance of the FL algorithm. To address this problem, a closed-form expression for the expected convergence rate of the FL algorithm is first derived to quantify the impact of wireless factors on FL. Then, based on the expected convergence rate of t
Wireless channel propagation parameter estimation forms the foundation of channel sounding, estimation, modeling, and sensing. This paper introduces a Deep Learning approach for joint delay- and Doppler estimation from frequency and time samples of a radio channel transfer function. Our work estimates the two-dimensional path parameters from a channel impulse response containing an unknown number of paths. Compared to existing deep learning-based methods, the parameters are not estimated via classification but in a quasi-grid-free manner. We employ a deterministic preprocessing scheme that incorporates a multi-channel windowing to increase the estimator's robustness and enables the use of a CNN architecture. The proposed architecture then jointly estimates the number of paths along with the respective delay and Doppler-shift parameters of the paths. Hence, it jointly solves the model order selection and parameter estimation task. We also integrate the CNN into an existing maximum-likelihood estimator framework for efficient initialization of a gradient-based iteration, to provide more accurate estimates. In the analysis, we compare our approach to other methods in terms of estimate
Radio frequency (RF) wireless power transfer (WPT) is a promising technology to seamlessly charge low-power devices, but its low end-to-end power transfer efficiency remains a critical challenge. To address the latter, low-cost transmit/radiating architectures, e.g., based on reconfigurable intelligent surfaces (RISs), have shown great potential. Beyond diagonal (BD) RIS is a novel branch of RIS offering enhanced performance over traditional diagonal RIS (D-RIS) in wireless communications, but its potential gains in RF-WPT remain unexplored. Motivated by this, we analyze a BD-RIS-assisted single-antenna RF-WPT system to charge a single rectifier, and formulate a joint beamforming and multi-carrier waveform optimization problem aiming to maximize the harvested power. We propose two solutions relying on semi-definite programming for fully connected BD-RIS, a successive convex approximation (SCA)-based beamforming approach, and an efficient low-complexity iterative method relying on SCA. Numerical results show that the proposed algorithms converge and that adding transmit sub-carriers or RIS elements improves the harvesting performance. We show that the transmit power budget impacts t
Wireless networking is encouraged by the constant enhancement of sensors' ability and wireless communication. To provide service quality support for multimedia viz. audio and video streams, the IEEE 802.11e MAC (Media Access Control) improves basic 802.11 MAC. IEEE 802.11 standard series such as IEEE 802.11a, b, g, n, p, and ac have been promoted and specified in the current communications and connection development. Each standard has functionality that matches the kind of applications for which the standard is intended. IEEE 802.11ac has better performance with fewer interferences and achieves gigabits per second capacity transfer rates. This paper discusses the comparative examination of the IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11p, and IEEE 802.11ac standards which increase accuracy and performance pertaining to the IEEE 802.11 standard. In this paper, we investigate the design requirements for numerous simultaneous peer-to-peer connections. Further, this study offers a systematic review and analysis of the MAC layer in WMN (Wireless Mesh Network) and also highlights their open research issues and challenges. Finally, this paper discusses various pote
Radio map in general refers to the geographical signal power spectrum density, formed by the superposition of concurrent wireless transmissions, as a function of location, frequency and time. It contains rich and useful information regarding the spectral activities and propagation channels in wireless networks. Such information can be leveraged to not only improve the performance of existing wireless services (e.g., via proactive resource provisioning) but also enable new applications, such as wireless spectrum surveillance. However, practical implementation of radio maps in wireless communication is often difficult due to the heterogeneity of modern wireless networks and the sheer amount of wireless data to be collected, stored, and processed. In this article, we provide an overview on the state-of-the-art techniques for constructing radio maps as well as applying them to achieve efficient and secure resource management in wireless networks. Some key research challenges are highlighted to motivate future investigation.
Over 80% of wireless traffic already takes place in buildings. Like water, gas, and electricity, wireless communication is becoming one of the most fundamental utilities of a building. It is well known that building structures have a significant impact on in-building wireless networks. If we seek to achieve the optimal network performance indoors, the buildings should be designed with the objective of maximizing wireless performance. So far, wireless performance has not yet been considered when designing a building. In this paper, we introduce a novel and interdisciplinary concept of building wireless performance (BWP) to a wide audience in both wireless communications and building design, emphasizing its broad impacts on wireless network development and deployment, and on building layout/material design. We first give an overview of the BWP evaluation framework proposed in our state-of-the-art works and explain their interconnections. Then, we outline the potential research directions in this exciting research area to encourage further interdisciplinary research.
The Rydberg atomic quantum receivers (RAQR) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on light-atom interactions relying on the so called electromagnetically induced transparency (EIT) and Aulter-Townes splitting (ATS), so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states and various modulation schemes facilitate an ultra-high sensitivity ($\sim$ nV/cm/$\sqrt{\text{Hz}}$) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the princ
Performance characterization is a fundamental issue in wireless networks for real time routing, wireless network simulation, and etc. There are four basic wireless operations that are required to be modeled, i.e., unicast, anycast, broadcast, and multicast. As observed in many recent works, the temporal and spatial distribution of packet receptions can have significant impact on wireless performance involving multiple links (anycast/broadcast/multicast). However, existing performance models and simulations overlook these two wireless behaviors, leading to biased performance estimation and simulation results. In this paper, we first explicitly identify the necessary "3-Dimension" information for wireless performance modeling, i.e., packet reception rate (PRR), PRR spatial distribution, and temporal distribution. We then propose a comprehensive modeling approach considering 3-Dimension Wireless information (called 3DW model). Further, we demonstrate the generality and wide applications of 3DW model by two case studies: 3DWbased network simulation and 3DW-based real time routing protocol. Extensive simulation and testbed experiments have been conducted. The results show that 3DW model
Radio frequency (RF) energy transfer and harvesting has been intensively studied recently as a promising approach to significantly extend the lifetime of energy-constrained wireless networks. This technique has a great potential to provide relatively stable and continuous RF energy to devices wirelessly; it thus opened a new research paradigm, termed wireless-powered communication (WPC), which has raised many new research opportunities with wide applications. Among these, the design and analysis of cooperative schemes towards efficient WPC have attracted tremendous research interests nowadays. This article provides an overview of various cooperative strategies for WPC, with particular emphasis on relaying protocols for wireless-powered cooperative communications, cooperative spectrum sharing schemes for cognitive wireless-powered networks, and cooperative jamming strategies towards wireless-powered secure communications. We also identify several interesting research directions in this area before concluding this article.
Wireless information and power transfer (WIPT) enables more sustainable and resilient communications owing to the fact that it avoids frequent battery charging and replacement. However, it also suffers from possible information interception due to the open nature of wireless channels. Compared to traditional secure communications, secrecy wireless information and power transfer (SWIPT) carries several distinct characteristics. On one hand, wireless power transfer may increase the vulnerability of eavesdropping, since a power receiver, as a potential eavesdropper, usually has a shorter access distance than an information receiver. On the other hand, wireless power transfer can be exploited to enhance wireless security. This article reviews the security issues in various SWIPT scenarios, with an emphasis on revealing the corresponding challenges and opportunities for implementing SWIPT. Furthermore, we provide a survey on a variety of physical layer security techniques to improve secrecy performance. In particular, we propose to use massive multiple-input multiple-output (MIMO) techniques to enhance power transfer efficiency and secure information transmission simultaneously. Finally
The growing concerns of a global environmental change raises a revolution on the way of utilizing energy. In wireless industry, green wireless communications has recently gained increasing attention and is expected to play a major role in reduction of electrical power consumption. In particular, actions to promote energy saving of wireless communications with regard to environmental protection are becoming imperative. To this purpose, we study a green communication system model where wireless base station is provisioned with a combination of renewable power source and electrical grid to minimize power consumption as well as meeting the users' demand. More specifically, we focus on an adaptive power management for wireless base station to minimize power consumption under various uncertainties including renewable power generation, power price, and wireless traffic load. We believe that demand side power management solution based on the studied communication architecture is a major step towards green wireless communications.
Optical wireless communication (OWC) is a promising technology for future wireless communications owing to its potentials for cost-effective network deployment and high data rate. There are several implementation issues in the OWC which have not been encountered in radio frequency wireless communications. First, practical OWC transmitters need an illumination control on color, intensity, and luminance, etc., which poses complicated modulation design challenges. Furthermore, signal-dependent properties of optical channels raise non-trivial challenges both in modulation and demodulation of the optical signals. To tackle such difficulties, deep learning (DL) technologies can be applied for optical wireless transceiver design. This article addresses recent efforts on DL-based OWC system designs. A DL framework for emerging image sensor communication is proposed and its feasibility is verified by simulation. Finally, technical challenges and implementation issues for the DL-based optical wireless technology are discussed.
This paper studies the simultaneous wireless information and power transfer (SWIPT) in a multiuser wireless system, in which distributed transmitters send independent messages to their respective receivers, and at the same time cooperatively transmit wireless power to the receivers via energy beamforming. Accordingly, from the wireless information transmission (WIT) perspective, the system of interest can be modeled as the classic interference channel, while it also can be regarded as a distributed multiple-input multiple-output (MIMO) system for collaborative wireless energy transmission (WET). To enable both information decoding (ID) and energy harvesting (EH) in SWIPT, we adopt the low-complexity time switching operation at each receiver to switch between the ID and EH modes over scheduled time. Based on this hybrid model, we aim to characterize the achievable rate-energy (R-E) trade-offs in the multiuser SWIPT system under various transmitter-side collaboration schemes. Specifically, to facilitate the collaborative energy beamforming, we propose a new signal splitting scheme at the transmitters, where each transmit signal is generally composed of an information signal component