搜索结果：Trucks

Autonomous trucking poses unique challenges due to articulated tractor-trailer geometry, and time-varying sensor poses caused by the fifth-wheel joint and trailer flex. Existing perception and calibration methods assume static baselines or rely on high-parallax and texture-rich scenes, limiting their reliability under real-world settings. We propose dCAP (dynamic Calibration and Articulated Perception), a vision-based framework that continuously estimates the 6-DoF (degree of freedom) relative pose between tractor and trailer cameras. dCAP employs a transformer with cross-view and temporal attention to robustly aggregate spatial cues while maintaining temporal consistency, enabling accurate perception under rapid articulation and occlusion. Integrated with BEVFormer, dCAP improves 3D object detection by replacing static calibration with dynamically predicted extrinsics. To facilitate evaluation, we introduce STT4AT, a CARLA-based benchmark simulating semi-trailer trucks with synchronized multi-sensor suites and time-varying inter-rig geometry across diverse environments. Experiments demonstrate that dCAP achieves stable, accurate perception while addressing the limitations of stati

The electrification of heavy-duty vehicles is a critical pathway towards improved energy efficiency of the freight sector. The current battery electric truck technology poses several challenges to the operations of commercial vehicles, such as limited driving range, sensitivity to climate conditions, and long recharging times. Estimating the energy consumption of heavy-duty electric trucks is crucial to assess the feasibility of the fleet electrification and its impact on the electric grid. This paper focuses on developing a model-based simulation approach to predict and analyze the energy consumption of drayage trucks used in ports logistic operations, considering seasonal climate variations and geographical characteristics. The paper includes results for three major container ports within the United States, providing region-specific insights into driving range, payload capacity, and charging infrastructure requirements, which will inform decision-makers in integrating electric trucks into the existing drayage operations and plan investments for electric grid development.

The advantages and disadvantages of Battery Swapping Stations (BSS) for heavy-duty trucks are poorly understood, relative to Fast Charging Stations (FCS) systems. This study evaluates these two charging mechanisms for electric heavy-duty trucks, aiming to compare the systems' efficiency and identify their optimal design. A model was developed to address the planning and operation of BSS in a charging network, considering in-station batteries as assets for various services. We assess performance metrics including transportation efficiency and battery utilization efficiency. Our evaluation reveals that BSS significantly increased transportation efficiency by reducing vehicle downtime compared to fast charging, but may require more batteries. BSS with medium-sized batteries offers improved transportation efficiency in terms of time and labor. FCS-reliant trucks require larger batteries to compensate for extended charging times. To understand the trade-off between these two metrics, a cost-benefit analysis was performed under different scenarios involving potential shifts in battery prices and labor costs. Additionally, BSS shows potential for significant $\text{CO}_2$ emission reducti

Electric trucks usually need to charge their batteries during long-range delivery missions, and the charging times are often nontrivial. As charging resources are limited, waiting times for some trucks can be prolonged at certain stations. To facilitate the efficient operation of electric trucks, we propose a distributed charging coordination framework. Within the scheme, the charging stations provide waiting estimates to incoming trucks upon request and assign charging ports according to the first-come, first-served rule. Based on the updated information, the individual trucks compute where and how long to charge whenever approaching a charging station in order to complete their delivery missions timely and cost-effectively. We perform empirical studies for trucks traveling over the Swedish road network and compare our scheme with the one where charging plans are computed offline, assuming unlimited charging facilities. It is shown that the proposed scheme outperforms the offline approach at the expense of little communication overhead.

Arc-routing problems underpin numerous critical field operations, including power-line inspection, urban police patrolling, and traffic monitoring. In this domain, the Rural Postman Problem (RPP) is a fundamental variant in which a prescribed subset of edges or arcs in a network must be traversed. This paper investigates a generalized form of the RPP, called RPP-mTD, which involves a fleet of multiple trucks, each carrying multiple drones. The trucks act as mobile depots traversing a road network, from which drones are launched to execute simultaneous service, with the objective of minimizing the overall makespan. Given the combinatorial complexity of RPP-mTD, we propose a Hybrid Genetic Algorithm (HGA) that combines population-based exploration with targeted neighborhood searches. Solutions are encoded using a two-layer chromosome that represents: (i) an ordered, directed sequence of required edges, and (ii) their assignment to vehicles. A tailored segment-preserving crossover operator is introduced, along with multiple local search techniques to intensify the optimization. We benchmark the proposed HGA against established single truck-and-drone instances, demonstrating competitiv

As global concerns about climate change intensify, the transition towards zero-emission freight is becoming increasingly vital. Drayage is an important segment of the freight system, typically involving the transport of goods from seaports or intermodal terminals to nearby warehouses. This sector significantly contributes to not only greenhouse gas emissions, but also pollution in densely populated areas. This study presents a holistic optimization model designed for an efficient transition to zero-emission drayage, offering cost-effective strategies for the coordinated investment planning for power systems, charging infrastructure, and electric drayage trucks. The model is validated in the Greater Los Angeles area, where regulatory goals are among the most ambitious. Furthermore, the model's design allows for easy adaptation to other regions. By focusing on drayage trucks, this study also paves the way for future research into other freight categories, establishing a foundation for a more extensive exploration in this field.

California has committed to ambitious decarbonization targets across multiple sectors, including decarbonizing the electrical grid by 2045. In addition, the medium- and heavy-duty truck fleets are expected to see rapid electrification over the next two decades. Considering these two pathways in tandem is critical for ensuring cost optimality and reliable power system operation. In particular, we examine the potential cost savings of electrical generation infrastructure by enabling flexible charging and bidirectional charging for these trucks. We also examine costs adjacent to enabling these services, such as charger upgrades and battery degradation. We deploy a large mixed-integer decarbonization planning model to quantify the costs associated with the electric generation decarbonization pathway. Example scenarios governing truck driving and charging behaviors are implemented to reveal the sensitivity of temporal driving patterns. Our experiments show that cost savings on the order of multiple billions of dollars are possible by enabling flexible and bidirectional charging in medium- and heavy-duty trucks in California.

Due to the declining birthrate and aging population, the shortage of labor in the construction industry has become a serious problem, and increasing attention has been paid to automation of construction equipment. We focus on the automatic operation of articulated six-wheel dump trucks at construction sites. For the automatic operation of the dump trucks, it is important to estimate the position and the articulated angle of the dump trucks with high accuracy. In this study, we propose a method for estimating the state of a dump truck by using four global navigation satellite systems (GNSSs) installed on an articulated dump truck and a graph optimization method that utilizes the redundancy of multiple GNSSs. By adding real-time kinematic (RTK)-GNSS constraints and geometric constraints between the four antennas, the proposed method can robustly estimate the position and articulation angle even in environments where GNSS satellites are partially blocked. As a result of evaluating the accuracy of the proposed method through field tests, it was confirmed that the articulated angle could be estimated with an accuracy of 0.1$^\circ$ in an open-sky environment and 0.7$^\circ$ in a mountai

Safe overtakes in trucks are crucial to prevent accidents, reduce congestion, and ensure efficient traffic flow, making early prediction essential for timely and informed driving decisions. Accordingly, we investigate the detection of truck overtakes from CAN data. Three classifiers, Artificial Neural Networks (ANN), Random Forest, and Support Vector Machines (SVM), are employed for the task. Our analysis covers up to 10 seconds before the overtaking event, using an overlapping sliding window of 1 second to extract CAN features. We observe that the prediction scores of the overtake class tend to increase as we approach the overtake trigger, while the no-overtake class remain stable or oscillates depending on the classifier. Thus, the best accuracy is achieved when approaching the trigger, making early overtaking prediction challenging. The classifiers show good accuracy in classifying overtakes (Recall/TPR > 93%), but accuracy is suboptimal in classifying no-overtakes (TNR typically 80-90% and below 60% for one SVM variant). We further combine two classifiers (Random Forest and linear SVM) by averaging their output scores. The fusion is observed to improve no-overtake classifica

Autonomous trucks are expected to fundamentally transform the freight transportation industry. In particular, Autonomous Transfer Hub Networks (ATHNs), which combine autonomous trucks on middle miles with human-driven trucks on the first and last miles, are seen as the most likely deployment pathway for this technology. This paper presents a framework to optimize ATHN operations and evaluate the benefits of autonomous trucking. By exploiting the problem structure, this paper introduces a flow-based optimization model for this purpose that can be solved by blackbox solvers in a matter of hours. The resulting framework is easy to apply and enables the data-driven analysis of large-scale systems. The power of this approach is demonstrated on a system that spans all of the United States over a four-week horizon. The case study quantifies the potential impact of autonomous trucking and shows that ATHNs can have significant benefits over traditional transportation networks.

The timely transportation of goods to customers is an essential component of economic activities. However, heavy-duty diesel trucks used for goods delivery significantly contribute to greenhouse gas emissions within many large metropolitan areas, including Los Angeles, New York, and San Francisco. To reduce GHG emissions by facilitating freight electrification, this paper proposes Joint Routing and Charging scheduling for electric trucks. The objective of the associated optimization problem is to minimize the cost of transportation, charging, and tardiness. A large number of possible combinations of road segments as well as a large number of combinations of charging decisions and charging durations leads to a combinatorial explosion in the possible decisions electric trucks can make. The resulting mixed-integer linear programming problem is thus extremely challenging because of the combinatorial complexity even in the deterministic case. Therefore, a Surrogate Level-Based Lagrangian Relaxation (SLBLR) method is employed to decompose the overall problem into significantly less complex truck subproblems. In the coordination aspect, each truck subproblem is solved independently of oth

Electrifying heavy-duty trucks offers a substantial opportunity to curtail carbon emissions, advancing toward a carbon-neutral future. However, the inherent challenges of limited battery energy and the sheer weight of heavy-duty trucks lead to reduced mileage and prolonged charging durations. Consequently, battery-swapping services emerge as an attractive solution for these trucks. This paper employs a two-fold approach to investigate the potential and enhance the efficacy of such services. Firstly, spatial-temporal demand prediction models are adopted to predict the traffic patterns for the upcoming hours. Subsequently, the prediction guides an optimization module for efficient battery allocation and deployment. Analyzing the heavy-duty truck data on a highway network spanning over 2,500 miles, our model and analysis underscore the value of prediction/machine learning in facilitating future decision-makings. In particular, we find that the initial phase of implementing battery-swapping services favors mobile battery-swapping stations, but as the system matures, fixed-location stations are preferred.

In recent years, significant achievements have been made in motion planning for intelligent vehicles. However, as a typical unstructured environment, open-pit mining attracts limited attention due to its complex operational conditions and adverse environmental factors. A comprehensive paradigm for unmanned transportation in open-pit mines is proposed in this research. Firstly, we propose a multi-task motion planning algorithm, called FusionPlanner, for autonomous mining trucks by the multi-sensor fusion method to adapt both lateral and longitudinal control tasks for unmanned transportation. Then, we develop a novel benchmark called MiningNav, which offers three validation approaches to evaluate the trustworthiness and robustness of well-trained algorithms in transportation roads of open-pit mines. Finally, we introduce the Parallel Mining Simulator (PMS), a new high-fidelity simulator specifically designed for open-pit mining scenarios. PMS enables the users to manage and control open-pit mine transportation from both the single-truck control and multi-truck scheduling perspectives. The performance of FusionPlanner is tested by MiningNav in PMS, and the empirical results demonstrat

We address the problem of routing a team of drones and trucks over large-scale urban road networks. To conserve their limited flight energy, drones can use trucks as temporary modes of transit en route to their own destinations. Such coordination can yield significant savings in total vehicle distance traveled, i.e., truck travel distance and drone flight distance, compared to operating drones and trucks independently. But it comes at the potentially prohibitive computational cost of deciding which trucks and drones should coordinate and when and where it is most beneficial to do so. We tackle this fundamental trade-off by decoupling our overall intractable problem into tractable sub-problems that we solve stage-wise. The first stage solves only for trucks, by computing paths that make them more likely to be useful transit options for drones. The second stage solves only for drones, by routing them over a composite of the road network and the transit network defined by truck paths from the first stage. We design a comprehensive algorithmic framework that frames each stage as a multi-agent path-finding problem and implement two distinct methods for solving them. We evaluate our appr