搜索结果：Tire

The accurate characterization of tire dynamics is critical for advancing control strategies in autonomous road vehicles, as tire behavior significantly influences handling and stability through the generation of forces and moments at the tire-road interface. Smart tire technologies have emerged as a promising tool for sensing key variables such as road friction, tire pressure, and wear states, and for estimating kinematic and dynamic states like vehicle speed and tire forces. However, most existing estimation and control algorithms rely on empirical correlations or machine learning approaches, which require extensive calibration and can be sensitive to variations in operating conditions. In contrast, model-based techniques, which leverage infinite-dimensional representations of tire dynamics using partial differential equations (PDEs), offer a more robust approach. This paper proposes a novel model-based, output-feedback lateral tracking control strategy for all-wheel steering vehicles that integrates distributed tire dynamics with smart tire technologies. The primary contributions include the suppression of micro-shimmy phenomena at low speeds and path-following via force control,

Despite their widespread use, current tire models have demonstrated a certain level of inaccuracy, primarily due to uncertainties related to unaccounted nonlinearity and disturbance effects resulting from tire operating conditions. Noteworthy factors such as tread depth, inflation pressure, tire temperature, and road surface condition significantly impact tire force and moment characteristics. These factors can vary considerably during tire operation and significantly affect both tire and vehicle performance. The improvement of tire models is crucial to enhance the effectiveness of advanced vehicle control systems, as accurate tire force characteristics are required for maintaining vehicle stability during demanding maneuvers. This paper investigates the impact of varying tire temperature, inflation pressure, and tread depth on steady-state tire force characteristics by analyzing the coefficients of the Pacejka 'magic formula' (MF) tire model. Based on this analysis, adaptation equations are proposed to compensate for the influence of these variables on the tire force curve. The advantages of using an adapted tire model are then demonstrated through simulation studies of a classica

The dynamics of rolling tires significantly influence the low-frequency (0-500 Hz) structure-borne noise within vehicles. Accurately characterizing these dynamics under realistic operating conditions remains challenging. Current state-of-the-art methods, primarily relying on Laser Doppler Vibrometers (LDV), are complex to implement, time-intensive, and generally limited to smooth tires in laboratory environments due to issues with speckle formation on treaded surfaces. This study introduces an innovative strategy for Operational Modal Analysis (OMA) of a rolling tire using a single wireless Tire Cavity Accelerometer (TCA) together with two optical sensors. The methodology leverages the non-integer ratio between the tire and drum diameters in a test rig to create a virtual sensor array. By utilizing optical sensors to time-stamp the cleat impact (on the drum) precisely and the TCA position (on the tire), the vibration responses from multiple revolutions are clustered according to the TCA's circumferential position at the moment of impact. This effectively synthesizes responses from an array of virtual sensors distributed around the tire circumference using data from a single test ru

Multi-axle Swerve-drive Autonomous Mobile Robots (MS-AGVs) equipped with independently steerable wheels are commonly used for high-payload transportation. In this work, we present a novel model predictive control (MPC) method for MS-AGV trajectory tracking that takes tire wear minimization consideration in the objective function. To speed up the problem-solving process, we propose a hierarchical controller design and simplify the dynamic model by integrating the \textit{magic formula tire model} and \textit{simplified tire wear model}. In the experiment, the proposed method can be solved by simulated annealing in real-time on a normal personal computer and by incorporating tire wear into the objective function, tire wear is reduced by 19.19\% while maintaining the tracking accuracy in curve-tracking experiments. In the more challenging scene: the desired trajectory is offset by 60 degrees from the vehicle's heading, the reduction in tire wear increased to 65.20\% compared to the kinematic model without considering the tire wear optimization.

Accurate estimation of the vehicle's sideslip angle and tire forces is essential for enhancing safety and handling performances in unknown driving scenarios. To this end, the present paper proposes an innovative observer that combines a linear single-track model with a distributed representation of the tires and information collected from standard sensors. In particular, by adopting a comprehensive representation of the tires in terms of hyperbolic partial differential equations (PDEs), the proposed estimation strategy exploits dynamical inversion to reconstruct the lumped and distributed vehicle states solely from yaw rate and lateral acceleration measurements. Simulation results demonstrate the effectiveness of the observer in estimating the sideslip angle and tire forces even in the presence of noise and model uncertainties.

In recent years, Electric Vehicles (EVs) have seen widespread public adoption. While EVs produce zero tailpipe emissions, they contribute to an increase in another type of vehicular emission: tire emissions. Battery-operated EVs are generally heavier than their combustion-engine counterparts and require greater acceleration forces, which their high-torque electric motors provide. This combination of increased weight and traction forces leads to higher tire emissions, which possess various adverse health and environmental effects. Here, we propose a control solution with promising results in mitigating tire wear in all-wheel-drive EVs. The idea is to utilize different tire profiles on each drive axis: a low-wear, low-traction axis and a high-wear, high-traction axis. Derived from detailed mathematical analyses, we propose a simple control scheme to counteract the performance difference from using the low-traction tires. The proposed control mechanism then distributes torque optimally between the two axes, maximizing usage from the low-wear axis and simultaneously maintaining stability and performance by leveraging high-traction tires. Through detailed numerical simulations, we demon

The four-wheel independent drive and four-wheel independent steering (4WID-4WIS) configurations enhance control flexibility and dynamic performance potential for more integrated electric vehicles. This paper comprehensively analyzes the impacts of four key factors on tire force control allocation: vertical load estimation, actuator dynamic characteristics, tire force constraints, and wheel steering precision at handling limits. The study demonstrates that precise vertical load estimation enhances lateral force allocation accuracy. Additionally, the self-compensating effect of lateral tire forces minimizes the impact of small deviations in vertical load estimation on tire force control allocation. A novel control allocation method considering actuator dynamics is introduced, effectively improving yaw rate response and reducing tracking errors. Considering tire-road adhesion and actuator rate constraints, an innovative method to calculate the real-time attainable tire force volume is proposed based on the tire slip ratio and slip angle. Feedforward control with bump steer compensation is implemented to improve wheel steering precision and lateral tire force control accuracy. Matlab/S

This paper investigates the stability and stabilization of semilinear single-track vehicle models with distributed tire friction dynamics, modeled as interconnections of ordinary differential equations (ODEs) and hyperbolic partial differential equations (PDEs). Motivated by the long-standing practice of neglecting transient tire dynamics in vehicle modeling and control, a rigorous justification is provided for such simplifications using singular perturbation theory. A perturbation parameter, defined as the ratio between a characteristic rolling contact length and the vehicle's longitudinal speed, is introduced to formalize the time-scale separation between rigid-body motion and tire dynamics. For sufficiently small values of this parameter, it is demonstrated that standard finite-dimensional techniques can be applied to analyze the local stability of equilibria and to design stabilizing controllers. Both state-feedback and output-feedback designs are considered, under standard stabilizability and detectability assumptions. Whilst the proposed controllers follow classical approaches, the novelty of the work lies in establishing the first mathematical framework that rigorously conne

Developing smart tires with high sensing capability is significant for improving the moving stability and environmental adaptability of wheeled robots and vehicles. However, due to the classical manufacturing design, it is always challenging for tires to infer external information precisely. To this end, this paper introduces a bimodal sensing tire, which can simultaneously capture tactile and visual data. By leveraging the emerging visuotactile techniques, the proposed smart tire can realize various functions, including terrain recognition, ground crack detection, load sensing, and tire damage detection. Besides, we optimize the material and structure of the tire to ensure its outstanding elasticity, toughness, hardness, and transparency. In terms of algorithms, a transformer-based multimodal classification algorithm, a load detection method based on finite element analysis, and a contact segmentation algorithm have been developed. Furthermore, we construct an intelligent mobile platform to validate the system's effectiveness and develop visual and tactile datasets in complex terrains. The experimental results show that our multimodal terrain sensing algorithm can achieve a classi

Accurate estimation of the tire-road friction coefficient (TRFC) is critical for ensuring safe vehicle control, especially under adverse road conditions. However, most existing methods rely on naturalistic driving data from regular vehicles, which typically operate under mild acceleration and braking. As a result, the data provide insufficient slip excitation and offer limited observability of the peak TRFC. This paper presents a high-slip-ratio control framework that enables automated vehicles (AVs) to actively excite the peak friction region during empty-haul operations while maintaining operational safety. A simplified Magic Formula tire model is adopted to represent nonlinear slip-force dynamics and is locally fitted using repeated high-slip measurements. To support safe execution in car-following scenarios, we formulate a constrained optimal control strategy that balances slip excitation, trajectory tracking, and collision avoidance. In parallel, a binning-based statistical projection method is introduced to robustly estimate peak TRFC under noise and local sparsity. The framework is validated through both closed-loop simulations and real-vehicle experiments, demonstrating its

Non Pneumatic tires offer a promising alternative to pneumatic tires. However, their discontinuous spoke structures present challenges in stiffness tuning, durability, and high speed vibration. This study introduces an integrated generative design and machine learning driven framework to optimize UPTIS type spoke geometries for passenger vehicles. Upper and lower spoke profiles were parameterized using high order polynomial representations, enabling the creation of approximately 250 generative designs through PCHIP based geometric variation. Machine learning models like KRR for stiffness and XGBoost for durability and vibration achieved strong predictive accuracy, reducing the reliance on computationally intensive FEM simulations. Optimization using Particle Swarm Optimization and Bayesian Optimization further enabled extensive performance refinement. The resulting designs demonstrate 53% stiffness tunability, up to 50% durability improvement, and 43% reduction in vibration compared to the baseline. PSO provided fast, targeted convergence, while Bayesian Optimization effectively explored multi objective tradeoffs. Overall, the proposed framework enables systematic development of hi

Temperature has a crucial influence on rubber friction and tire dynamics. The temperature field in a rubber tread block is the sum of the background temperature $T_0({\bf x},t)$, which varies slowly in time and space, and the flash temperature $ΔT({\bf x},t)$, which in nonzero only close to the macroasperity contact regions, and which varies rapidly in time often on the millisecond time scale. Here we study the motion of a single tire tread block and how it is influenced by the flash temperature. We also present a theory and experimental results for the size of the macroasperity contact regions. In particular, we show that for a large enough nominal contact area, in most cases the diameter $D$ of the macroasperity contact regions are nearly independent of the elastic modulus and the nominal contact pressure.

This work presents a methodology to estimate tire parameters and their uncertainty using a Bayesian optimization approach. The literature mainly considers the estimation of tire parameters but lacks an evaluation of the parameter identification quality and the required slip ratios for an adequate model fit. Therefore, we examine the use of Stochastical Variational Inference as a methodology to estimate both - the parameters and their uncertainties. We evaluate the method compared to a state-of-the-art Nelder-Mead algorithm for theoretical and real-world application. The theoretical study considers parameter fitting at different slip ratios to evaluate the required excitation for an adequate fitting of each parameter. The results are compared to a sensitivity analysis for a Pacejka Magic Formula tire model. We show the application of the algorithm on real-world data acquired during the Abu Dhabi Autonomous Racing League and highlight the uncertainties in identifying the curvature and shape parameters due to insufficient excitation. The gathered insights can help assess the acquired data's limitations and instead utilize standardized parameters until higher slip ratios are captured.

Automated vehicles need to estimate tire-road friction information, as it plays a key role in safe trajectory planning and vehicle dynamics control. Notably, friction is not solely dependent on road surface conditions, but also varies significantly depending on the tire temperature. However, tire parameters such as the friction coefficient have been conventionally treated as constant values in automated vehicle motion planning. This paper develops a simple thermodynamic model that captures tire friction temperature variation. To verify the model, it is implemented into trajectory planning for automated drifting - a challenging application that requires leveraging an unstable, drifting equilibrium at the friction limits. The proposed method which captures the hidden tire dynamics provides a dynamically feasible trajectory, leading to more precise tracking during experiments with an LQR (Linear Quadratic Regulator) controller.

Tire degradation plays a critical role in Formula 1 race strategy, influencing both lap times and optimal pit-stop decisions. This paper introduces a Bayesian state-space modeling framework for estimating the latent degradation dynamics of Formula 1 tires using publicly available timing data from the FastF1 Python API. Lap times are modeled as a function of fuel mass and latent tire pace, with pit stops represented as state resets. Several model extensions are explored, including compound-specific degradation rates, time-varying degradation dynamics, and a skewed t observation model to account for asymmetric driver errors. Using Lewis Hamilton's performance in the 2025 Austrian Grand Prix as a case study, the proposed framework demonstrates superior predictive performance over an ARIMA(2,1,2) baseline, particularly under the skewed t specification. Although compound-specific degradation differences were not statistically distinct, the results show that the state-space approach provides interpretable, probabilistic, and computationally efficient estimates of tire degradation. This framework can be generalized to multi-race or multi-driver analyses, offering a foundation for real-tim

This paper introduces a robust approach for automated defect detection in tire X-ray images by harnessing traditional feature extraction methods such as Local Binary Pattern (LBP) and Gray Level Co-Occurrence Matrix (GLCM) features, as well as Fourier and Wavelet-based features, complemented by advanced machine learning techniques. Recognizing the challenges inherent in the complex patterns and textures of tire X-ray images, the study emphasizes the significance of feature engineering to enhance the performance of defect detection systems. By meticulously integrating combinations of these features with a Random Forest (RF) classifier and comparing them against advanced models like YOLOv8, the research not only benchmarks the performance of traditional features in defect detection but also explores the synergy between classical and modern approaches. The experimental results demonstrate that these traditional features, when fine-tuned and combined with machine learning models, can significantly improve the accuracy and reliability of tire defect detection, aiming to set a new standard in automated quality assurance in tire manufacturing.

Automated drifting presents a challenge problem for vehicle control, requiring models and control algorithms that can precisely handle nonlinear, coupled tire forces at the friction limits. We present a neural network architecture for predicting front tire lateral force as a drop-in replacement for physics-based approaches. With a full-scale automated vehicle purpose-built for the drifting application, we deploy these models in a nonlinear model predictive controller tuned for tracking a reference drifting trajectory, for direct comparisons of model performance. The neural network tire model exhibits significantly improved path tracking performance over the brush tire model in cases where front-axle braking force is applied, suggesting the neural network's ability to express previously unmodeled, latent dynamics in the drifting condition.

This paper addresses the local stabilization problem for semilinear single-track vehicle models with distributed tire friction dynamics, represented as interconnections of ordinary differential equations (ODEs) and hyperbolic partial differential equations (PDEs). A passivity-exploiting backstepping design is presented, which leverages the strict dissipativity properties of the PDE subsystem to achieve exponential stabilization of the considered ODE-PDE interconnection around a prescribed equilibrium. Sufficient conditions for local well-posedness and exponential convergence are derived by constructing a Lyapunov functional combining the lumped and distributed states. Both state-feedback and output-feedback controllers are synthesized, the latter relying on a cascaded observer. The theoretical results are corroborated with numerical simulations, considering non-ideal scenarios and accounting for external disturbances and uncertainties. Simulation results confirm that the proposed control strategy can effectively and robustly stabilize oversteer vehicles at high speeds, demonstrating the relevance of the approach for improving the safety and performance in automotive applications.

The growing prevalence of Internet of Things (IoT) technologies has led to a rise in the popularity of intelligent vehicles that incorporate a range of sensors to monitor various aspects, such as driving speed, fuel usage, distance proximity and tire anomalies. Nowadays, real-time tire sensing systems play important roles for intelligent vehicles in increasing mileage, reducing fuel consumption, improving driving safety, and reducing the potential for traffic accidents. However, the current tire sensing system drains a significant vehicle' energy and lacks effective collection of sensing data, which may not guarantee the immediacy of driving safety. Thus, this paper designs an energy-efficient wireless tire sensing system (WTSS), which leverages energy-saving techniques to significantly reduce power consumption while ensuring data retrieval delays during real-time monitoring. Additionally, we mathematically analyze the worst-case transmission delay of the system to ensure the immediacy based on the collision probabilities of sensor transmissions. This system has been implemented and verified by the simulation and field trial experiments. These results show that the proposed scheme

We introduce a novel digital twin framework for predictive maintenance of long-term physical systems. Using monitoring tire health as an application, we show how the digital twin framework can be used to enhance automotive safety and efficiency, and how the technical challenges can be overcome using a three-step approach. Firstly, for managing the data complexity over a long operation span, we employ data reduction techniques to concisely represent physical tires using historical performance and usage data. Relying on these data, for fast real-time prediction, we train a transformer-based model offline on our concise dataset to predict future tire health over time, represented as Remaining Casing Potential (RCP). Based on our architecture, our model quantifies both epistemic and aleatoric uncertainty, providing reliable confidence intervals around predicted RCP. Secondly, to incorporate real-time data, we update the predictive model in the digital twin framework, ensuring its accuracy throughout its life span with the aid of hybrid modeling and the use of discrepancy function. Thirdly, to assist decision making in predictive maintenance, we implement a Tire State Decision Algorithm