搜索结果：Submerged

Vertical turbine pumps in oil and gas operations rely on motor-mounted accelerometers for condition monitoring. However, these sensors cannot detect faults at submerged impellers exposed to harsh downhole environments. We present the first study deploying encapsulated accelerometers mounted directly on submerged impeller bowls, enabling in-situ vibration monitoring. Using a lab-scale pump setup with 1-meter oil submergence, we collected vibration data under normal and simulated fault conditions. The data were analyzed using a suite of machine learning models -- spanning traditional and deep learning methods -- to evaluate sensor effectiveness. Impeller-mounted sensors achieved 91.3% average accuracy and 0.973 AUC-ROC, outperforming the best non-submerged sensor. Crucially, encapsulation caused no statistically significant performance loss in sensor performance, confirming its viability for oil-submerged environments. While the lab setup used shallow submergence, real-world pump impellers operate up to hundreds of meters underground -- well beyond the range of surface-mounted sensors. This first-of-its-kind in-situ monitoring system demonstrates that impeller-mounted sensors -- enca

Understanding how submerged vegetation modifies the water surface is crucial for modeling momentum exchange between shallow waters and the atmosphere. In particular, quantifying its impact on the equivalent aerodynamic roughness of the water surface is essential for improved boundary-layer parameterization in oceanic and atmospheric models. In this Letter, we present fully resolved multiphase simulations of gravity-driven flow over a fully submerged vegetated bed, capturing the coupled dynamics of air, water, and individual plant stems, under quasi-realistic conditions (the air/water viscosity ratio is real, while the density ratio is reduced tenfold). Our results show that vegetation submerged for four times its height regularizes the water surface suppressing strong deformations and homogenizing streamwise-propagating wave fronts along the transversal direction. Despite these alterations, the equivalent roughness perceived by the overlying air flow remains unchanged. These findings clarify vegetation-surface interactions and provide quantitative insights for nature-based wave mitigation strategies and atmospheric boundary-layer modeling.

Gaining insight into the interaction between flexible piezoelectric structures and ocean waves can inform the development of compact, high-efficiency wave-energy converters that harvest renewable energy from the marine environment. In this paper, the problem of wave energy absorption by floating and submerged piezoelectric plates is investigated. The equations of motion for a plate consisting of two piezoelectric layers separated by an elastic substrate are derived in dimensional form from the full piezoelectric constitutive laws. A solution using a modal expansion method is proposed, in which the component radiation and diffraction problems are reduced to hypersingular integral equations and solved numerically using a constant panel method. The method is general and can solve the equations of motion for submerged rigid, flexible elastic or flexible piezoelectric plates. Extensive numerical results for the energy absorption and efficiency are given for a range of parameters, including different piezoelectric materials: polyvinylidene fluoride (PVDF) and lead zirconate titanate (PZT-5H). Importantly, greater energy absorption is obtained for submerged plates when compared to plates

We investigate the phenomena of crater formation and gas release caused by projectile impact on underwater beds, which occurs in many natural, geophysical, and industrial applications. The bed in our experiment is constructed of hydrophobic particles, which trap a substantial amount of air in its pores. In contrast to dry beds, the air-water interface in a submerged bed generates a granular skin that provides rigidity to the medium by producing skin over the bulk. The projectile's energy is used to reorganise the grains, which causes the skin to crack, allowing the trapped air to escape. The morphology of the craters as a function of impact energy in submerged beds exhibits different scaling laws than what is known for dry beds. This phenomenon is attributed to the contact line motion on the hydrophobic fractal-like surface of submerged grains. The volume of the gas released is a function of multiple factors, chiefly the velocity of the projectile, depth of the bed and depth of the water column.

Density-driven segregations, extensively studied in a simple rotating drum, are enriched with a wide range of underlying physics. Diverse symmetrical segregation patterns formed by mixing two types of dry mono-sized grains have been revealed due to variations in heavy and light grain densities, $ρ_h$ and $ρ_l$, and rotating speeds, $ω$. We engender experimentally a nearly complete segregation, not occurring in dry conditions of the same $ρ_h$, $ρ_l$, and $ω$, in submerged states. Further, based on the experiment-validated simulations, using coupled computational fluid dynamics and discrete element method, it is found the mixing index can be well predicted over a wide parameter space in the effective density ratio, $D=(ρ_h-ρ_f)/(ρ_l-ρ_f)$ with $ρ_f$ being the fluid density. Specifically, with increasing $D$ well-mixed states transit to fully-segregated states with a rising number of vortices and severer asymmetrical patterns. When the global Reynolds number $\mathrm{Re}_g$ is enlarged, the vortex area of heavy particles shrinks for lower $D$, while the area of light particles gradually saturates; meanwhile, for higher $D$ a new vortex with a continuously expanded area can be encount

This article explores how a submerged elastic plate, clamped at one edge, interacts with water waves. Submerged elastic plates have been considered as potentially effective design elements in the development of wave energy harvesters but their behavior in a wave field remains largely unexplored, especially experimentally. Positioned at a fixed depth in a wave tank, the flexible plate demonstrates significant wave reflection capabilities, a characteristic absent in rigid plates of identical dimensions. The experiments thus reveal that plate motion is crucial for wave reflection. Sufficiently steep waves are shown to induce a change in the mean position of the plate, with the trailing edge reaching the free surface in some cases. This configuration change is found to be particularly efficient to break water waves. These findings contribute to understanding the potential of elastic plates for wave energy harvesting and wave attenuation scenarios.

Numerous natural and industrial processes entail the spontaneous entrapment of gas/air as rough/patterned surfaces are submerged under water. As the wetting transitions ensue, the gas diffuses into the water leading to the fully-water-filled state. However, the standard models for wetting do not account for the microtexture's topography. In other words, it is not clear whether the lifetime of n cavities arranged in a I-D line or a II-D (circular or square) lattice would be the same or not as a single 0-D cavity. In response, we tracked the time-dependent fates of gas pockets trapped in I-D and II-D lattices and compared them with wetting transitions in commensurate 0-D cavities. Interestingly, the wetting transitions in the I-D and the II-D arrays had a directionality such that the gas from the outermost cavities was lost the first, while the innermost got filled by water the last. In essence, microtexture's spatial organization afforded shielding to the loss of the gas from the innermost cavities, which we probed as a function of the microtexture's pitch, surface density, dimensionality, and hydrostatic pressure. These findings advance our knowledge of wetting transitions in micro

Lubrication flows between two solid surfaces can be found in a variety of biological and engineering settings. In many of these systems, the lubricant exhibits viscoelastic properties, which modify the associated lubrication forces. Here, we experimentally study viscoelastic lubrication by considering the motion of a submerged cylinder sliding down an incline. We demonstrate that cylinders move faster when released in a viscoelastic Boger liquid compared to a Newtonian liquid with similar viscosity. Cylinders exhibit pure sliding motion in viscoelastic liquids, in contrast to the stick-slip motion observed in Newtonian liquids. We rationalize our results by using the second-order fluid model, which predicts a lift force on the cylinder arising from the normal-stress differences provided by the dissolved polymers. The interplay between viscoelastic lift, viscous friction, and gravity leads to a prediction for the sliding speed, which is consistent with our experimental results for weakly viscoelastic flows. Finally, we identify a remarkable difference between the lubrication of cylindrical and spherical contacts, as the latter does not exhibit any lift for weak viscoelasticity.

We report on an experimental study of a device composed by an array of submerged, reversed and periodic cylindrical pendula (resonators), whose objective is the attenuation of surface gravity waves. The idea is inspired by the concept of metamaterials, i.e. engineered structures designed to interact with waves and manipulate their propagation properties. The study is performed in a wave flume where single frequency waves are excited in a wide range of frequencies. We explore various configurations of the device, measuring the transmitted, reflected and dissipated energy of the waves. If the incoming wave frequencies are sufficiently close to the natural frequency of the pendula, we find a considerable wave attenuation effect, driven by viscous dissipative mechanisms. This behaviour is enhanced by the number of resonators in the array. Moreover, the device is also capable of reflecting the energy of selected frequencies of the incoming waves. These frequencies can be predicted by assuming the interactions involving at least three wave modes, including higher harmonics, and are therefore associated with the distance between the resonators. The presented results show promise for the d

An enriched hybrid high-order method is designed for the Stokes equations of fluid flow and is fully applicable to generic curved meshes. Minimal regularity requirements of the enrichment spaces are given, and an abstract error analysis of the scheme is provided. The method achieves consistency in the enrichment space and is proven to converge optimally in energy error. The scheme is applied to 2D flow around circular cylinders, for which the local behaviour of the velocity and pressure fields are known. By enriching the local spaces with these solutions, superior numerical results near the submerged cylinders are achieved.

In submerged sandy slopes, soil is frequently eroded as a combination of two main mechanisms: breaching, which refers to the retrogressive failure of a steep slope forming a turbidity current, and, instantaneous sliding wedges, known as shear failure, that also contribute to shape the morphology of the soil deposit. Although there are several modes of failures, in this paper we investigate breaching and shear failures of granular columns using the two-fluid approach. The numerical model is first applied to simulate small scale granular column collapses with different initial volume fractions to study the role of the initial conditions on the main flow dynamics. For loosely packed granular columns, the porous medium initially contracts and the resulting positive pore pressure leads to a rapid collapse. Whereas in initially dense-packing columns, the porous medium initially dilates and negative pore pressure is generated stabilizing the granular column, which results in a slow collapse. The proposed numerical approach shows good agreement with the experimental data in terms of morphology and excess of pore pressure. Numerical results are extended to a large-scale application known as

Angular momentum changing collisions can be suppressed in atoms whose valence electrons are submerged beneath filled shells of higher principle quantum number. To determine whether spin-exchange collisions are suppressed in these "submerged shell" atoms, we measured spin-exchange collisions of six hyperfine states of Mn at temperatures below 1 K. Although the 3d valence electrons in Mn are submerged beneath a filled 4s orbital, we find that the spin exchange rate coefficients are similar to those of Na and H (which are non-submerged shell atoms).

The mean stress tensor is essential to investigate the dynamics of granular material. In this paper, we use Hamilton's principle of least action to derive the averaged stress tensor of discrete granular assemblies subjected to hydraulic force fields, as well as rigorous conditions for a proper definition of the Representative Volume Element (RVE). The main goal behind our efforts is to upscale particle physics into a sound stress tensor for systems involving the complex interaction between grains and water. We identify the contributions from the unbalanced forces, hydraulic forces, gravity, external forces, and particle fluctuation to the mean stress tensor. In doing so, it is convenient to separate the influence of different force fields when the granular system is subjected to complex environments, e.g., subaqueous conditions. The obtained formula is then validated by triaxial test simulations of dry and saturated granular systems using the Discrete Element Method (DEM) and the Lattice-Boltzmann Method (LBM). The results show that the deduced formula can accurately calculate the stress tensor of discrete assemblies with various body-force fields. We used validated DEM-LBM simulat

Linearized flow past a submerged obstacle with an elastic sheet resting on the flow surface are studied in the limit that the bending length is small compared to the obstacle depth, in two and three dimensions. Gravitational effects are included in the two-dimensional geometry, but absent in the three-dimensional geometry; the Froude number is chosen so that gravitational and elastic restoring forces are comparable in size. In each of these problems, the waves are exponentially small in the asymptotic limit, and can be computed using exponential asymptotic methods. In the two-dimensional problem, flow past a submerged step is considered. It is found that the relative strength of the gravitational and elastic restoring forces produce two distinct classes of elastic sheet behaviour. In one parameter regime, constant-amplitude elastic waves and gravity waves extend indefinitely upstream and downstream from the obstacle. In the other parameter regime, all waves decay exponentially away from the obstacle. The equivalent nonlinear two-dimensional geometry is then studied; this asymptotic analysis predicts the existence of a third intermediate regime in which waves persist indefinitely on

In this paper we compare the heave, surge, and pitch dynamics of a submerged cylindrical point absorber, simulated using potential flow and fully-resolved computational fluid dynamics (CFD) models. The potential flow model is based on the time-domain Cummins equation, whereas the CFD model uses the fictitious domain Brinkman penalization (FD/BP) technique. The submerged cylinder is tethered to the seabed using a power take-off (PTO) unit which restrains the heave, surge, and pitch motions of the converter, and absorbs energy from all three modes. It is demonstrated that the potential theory over-predicts the amplitudes of heave and surge motions, whereas it results in an insignificant pitch for a fully-submerged axisymmetric converter. It also under-estimates the slow drift of the buoy, which the CFD model is able to capture reliably. Further, we use fully-resolved CFD simulations to study the performance of a three degrees of freedom (DOF) cylindrical buoy under varying PTO coefficients, mass density of the buoy, and incoming wave heights. It is demonstrated that the PTO coefficients predicted by the linear potential theory are sub-optimal for waves of moderate and high steepness.

We have proposed a new method for solving the problem of ship waves excited on the surface of a non-viscous liquid by a submerged object that moves at a variable speed. As a first application of this method, we have obtained a new solution to the classic problem of ship waves generated by a submerged ball that moves rectilinearly with constant velocity parallel to the equilibrium surface of the liquid. For this example, we have derived asymptotic expressions describing the vertical displacement of the liquid surface in the limit of small and large values of the Froude number. The exact solution is presented in the form of two terms, each of which is reduced to one-dimensional integrals. One term describes the "Bernoulli hump" and another term the "Kelvin wedge." As a second example, we considered vertical oscillation of the submerged ball. In this case, the solution leads to the calculation of one-dimensional integral and describes surface waves propagating from the epicenter above the ball.

It was shown that the vibrations can intensify of heat-mass transfer and mixing of the melt, and also to reduce dynamic and temperature boundary layers and to increase a temperature gradient on melt/crystal interface, that can to increase rate of crystal growth by the Czochralski method with a submerged vibrator. It is can be very impotent for manufacturing and quality of crystals.

This paper presents a new method allowing for a numerical study of the interaction between a submerged solid structure and a current with surface waves. The method involves a Navier-Stokes equation solver for a two-fluid formulation with the Accurate Conservative Level-set (ACLS) method used for interface tracking. The solver is generalized on unstructured grids, thus enabling a boundary-fitted implementation of the FSI (Fluid-Solid Interaction). A solid, vertical, partially submerged cylinder is examined as it moves through the flume. The latter is partially filled with flowing water; waves propagating on the liquid surface impact the cylinder. Simulation results include examination of the free surface topology, air entrapment and vorticity production in the cylinder wake, as well as the pressure distribution on the solid. Numerical results are validated against an experiment performed by the same authors.