Strip detectors are populating outer trackers of high-energy particle experiments. They are convenient for covering large areas of sensitive material since they use less power and have fewer readout channels compared to pixels sensors. Nevertheless, they are typically manufactured with a mask set that covers the full wafer, otherwise when using smaller reticles the strip implants have to be stitched. For this project, strip detectors were fabricated in a CMOS commercial foundry using different reticles to be stitched several times, proving the feasibility of this technology. LFoundry produced the passive CMOS strip detector with a production line of 150 nm node technology, using a 150 um thick FZ wafer. Those strip sensors have three different geometries to study different impacts of the CMOS technology. The strips have lengths of 2.1 cm and 4.1 cm, stitching 3 or 5 reticles respectively. This work shows results of 24 GeV proton irradiated passive CMOS strip detectors. The detectors were irradiated at CERN and were tested with different set-ups, not showing any effect from the strips stitching. Proving that this technology is feasible for detecting high-energy particles opens the d
While witnessed with rapid development, remote sensing object detection remains challenging for detecting high aspect ratio objects. This paper shows that large strip convolutions are good feature representation learners for remote sensing object detection and can detect objects of various aspect ratios well. Based on large strip convolutions, we build a new network architecture called Strip R-CNN, which is simple, efficient, and powerful. Unlike recent remote sensing object detectors that leverage large-kernel convolutions with square shapes, our Strip R-CNN takes advantage of sequential orthogonal large strip convolutions in our backbone network StripNet to capture spatial information. In addition, we improve the localization capability of remote-sensing object detectors by decoupling the detection heads and equipping the localization branch with strip convolutions in our strip head. Extensive experiments on several benchmarks, for example DOTA, FAIR1M, HRSC2016, and DIOR, show that our Strip R-CNN can greatly improve previous work. In particular, our 30M model achieves 82.75% mAP on DOTA-v1.0, setting a new state-of-the-art record. Our code will be made publicly available.Code i
Most of the tracking detectors for high energy particle experiments are filled with silicon detectors since they are radiation hard, they can give very small spatial resolution and they can take advantage of the silicon electronics foundries developments and production lines. Strip detectors are very useful to cover large areas for tracking purposes, while consuming less power per area compared to pixel sensors. The majority of particle physics experiments use conventional silicon strip detectors fabricated in foundries that do not use stitching, relying on a very small number of foundries worldwide that can provide large amounts of strip detectors. Fabricating strip detectors in a CMOS foundry opens the possibility to use more foundries and to include active elements in the strips for future productions. For the passive CMOS strip detectors project we fabricated strip detectors in a CMOS foundry using two 1 cm2 reticles that are stitched together along the wafer. The fabricated strips stitched the reticles three and five times, and it was shown that the performance of those strips is not affected by the stitching. This paper shows 3D TCAD simulations of the stitching area to inves
The currents and field distributions of a vortex in a thin superconducting strip of a width $W$ is considered. It is shown that unlike infinite films where the vortex field crosses the film only in one direction (say, from the half-space under the film to the half-space above it), in strips (as well as in finite size film samples of any shape) the field lines go back to the lower half-space not only out of the sample but also through certain strip parts. The strip patches where the magnetic lines ``dive" back to the space under the strip are situated mostly near the strip edges at the strip and out of it. The magnetic flux through the strip associated with the vortex is shown to be less than the flux quantum and depends on the vortex position. The suppression of the vortex flux is strong in narrow strips with $W<<Λ=2λ^2/d$ where $λ$ is the bulk London penetration depth and $d$ is the film thickness. The vortex energy scales roughly with $W/Λ$ and depends on vortex position.
We study the properties of a two-dimensional non-relativistic electron gas (TDEG) constrained on wires along a Möbius strip. We considered wires around the strip and along the transverse direction, across the width of the strip. For each direction, we investigate how the curvature modifies the electronic states and their corresponding energy spectrum. At the center of the strip, the wires around the surface form quantum rings whose spectrum depends on the strip radius $a$. For wires at the edge of the strip, the inner edge turns into the outer edge. Accordingly, the curvature yields localized states in the middle of the wire. Along the strip width, the effective potential exhibits a parity symmetry breaking leading to the localization of the bound state on one side of the strip.
We introduce Möbius strip diagram algebras (and their monoid and categorical versions) as subalgebras of a partition-style diagram calculus in which strands may carry handles and Möbius strip features. We identify the resulting diagram category with a linear quotient of a nonorientable two-dimensional cobordism category. Finally, we develop the associated cell theory and use it to classify the simple modules and compute dimensions in a range of cases.
We investigate the dynamic properties of elastic lattices defined by tessellations of a hyperbolic strip domain. These strip lattices are generated by a conformal map of tessellations of the hyperbolic disk. Their vibrational modes are organized into three distinct classes: boundary-localized, interior-localized, and global. This mode classification is governed by a localization index quantifying the spatial localization of each mode along the strip's width. We show that, like hyperbolic lattices in the disk, hyperbolic strip lattices exhibit dynamic spectra populated primarily by localized modes. This finding is supported by numerical studies of the dynamics of a strip lattice whose hyperbolically distributed sites are coupled by structural beams. The integrated density of states computation for boundary, interior, and global modes reveals the predominance of localized modes and allows for the identification of spectral bands dominated by particular mode classes. This analysis informs time domain simulations of the lattice response to bandlimited inputs dominated by each mode class. The results illustrate distinctive wave propagation behavior when the excited frequency band is dom
We investigate the effects of the curved geometry on a massless relativistic electron constrained to a graphene strip with a Moebius strip shape. The anisotropic and parity-violating geometry of the Moebius band produces a geometric potential that inherits these features. By considering wires along the strip width and the strip length, we find exact solutions for the Dirac equation and the effects of the geometric potential on the electron were explored. In both cases, the geometric potential yields to a geometric phase on the wave function. Along the strip width, the density of states depends on the direction chosen for the wire, a consequence of the lack of axial symmetry. Moreover, the breaking of the parity symmetry enables the electronic states to be concentrated on the inner or on the outer portion of the strip. For wires along the strip length, the nontrivial topology influences the eigenfunctions by modifying their periodicity. It turns out that the ground state has a period of $4π$ whereas the first excited state is a $2π$ periodic function. Moreover, we found that the energy levels are half-integer multiples of the energy of the ground state.
The complex-field approach is developed to derive analytical expressions of the magnetic field distributions around superconducting strips on ferromagnetic substrates (SC/FM strips). We consider the ferromagnetic substrates as ideal soft magnets with an infinite magnetic permeability, neglecting the ferromagnetic hysteresis. On the basis of the critical state model for a superconducting strip, the ac susceptibility $χ_1'+iχ_1''$ of a SC/FM strip exposed to a perpendicular ac magnetic field is theoretically investigated, and the results are compared with those for superconducting strips on nonmagnetic substrates (SC/NM strips). The real part $χ_1'$ for $H_0/j_cd_s\to 0$ (where $H_0$ is the amplitude of the ac magnetic field, $j_c$ is the critical current density, and $d_s$ is the thickness of the superconducting strip) of a SC/FM strip is 3/4 of that of a SC/NM strip. The imaginary part $χ_1''$ (or ac loss $Q$) for $H_0/j_cd_s<0.14$ of a SC/FM strip is larger than that of a SC/NM strip, even when the ferromagnetic hysteresis is neglected, and this enhancement of $χ_1''$ (or $Q$) is due to the edge effect of the ferromagnetic substrate.
In this paper we describe the global on-sky calibration strategy of the LSPE-Strip instrument. Strip is a microwave telescope operating in the Q- and W-bands (central frequencies of 43 and 95 GHz respectively) from the Observatorio del Teide in Tenerife, with the goal to observe and characterise the polarised Galactic foreground emission, and complement the observations of the polarisation of the cosmic microwave background to be performed by the LSPE-SWIPE instrument and other similar experiments operating at higher frequencies to target the detection of the B-mode signal from the inflationary epoch of the Universe. Starting from basic assumptions on some of the instrument parameters (NET, 1/f noise knee frequency, beam properties, observing efficiency) we perform realistic simulations to study the level of accuracy that can be achieved through observations of bright celestial calibrators in the Strip footprint (sky fraction of 30 %) on the determination and characterisation of the main instrument parameters: global and relative gain factors (in intensity and in polarisation), polarisation direction, polarisation efficiency, leakage from intensity to polarisation, beams, window fu
The AC-coupled Strip LGAD (Strip AC-LGAD) is a novel LGAD design that diminishes the density of readout electronics through the use of strip electrodes, enabling the simultaneous measurement of time and spatial information. The Institute of High Energy Physics has designed a long Strip AC-LGAD prototype with a strip electrode length of 5.7 mm and pitches of 150 $μm$, 200 $μm$, and 250 $μm$. Spatial and timing resolutions of the long Strip AC-LGAD are studied by pico-second laser test and beta source tests. The laser test demonstrates that spatial resolution improves as the pitch size decreases, with an optimal resolution achieved at 8.3 $μ$m. Furthermore, the Beta source test yields a timing resolution of 37.6 ps.
The specific geometry of a strip provides connections between solitons and solitonic vortices, which are vortices with a solitonic behaviour in the infinite direction of the strip. We show that there exist stationary solutions to the Gross-Pitaevskii equation with k vortices on a transverse line, which bifurcate from the soliton solution as the width of the strip is increased. After decomposing into Fourier series with respect to the transverse variable, the construction of these solitonic vortices is achieved by relying on a careful analysis of the linearized operator around the soliton solution: we apply a fixed point argument to solve the equation in the directions orthogonal to the kernel of the linearized operator, and then handle the direction corresponding to the kernel by an inverse function theorem.
We introduce the notion of strip complex. A strip complex is a special type of complex obtained by gluing "strips" along their natural boundaries according to a given graph structure. The most familiar example is the one dimensional complex classically associated with a graph, in which case the strips are simply copies of the unit interval (our setup actually allows for variable edge length). A leading key example is treebolic space, a geometric object studied in a number of recent articles, which arises as a horocyclic product of a metric tree with the hyperbolic plane. In this case, the graph is a regular tree, the strips are the closed unit interval times the real line, and each strip is equipped with the hyperbolic geometry of a specific strip in upper half plane. We consider natural families of Dirichlet forms on a general strip complex and show that the associated heat kernels and harmonic functions have very strong smoothness properties. We study questions such as essential selfadjointness of the underlying differential operator acting on a suitable space of smooth functions satisfying a Kirchoff type condition at points where the strip complex bifurcates. Compatibility with
Differential growth processes play a prominent role in shaping leaves and biological tissues. Using both analytical and numerical calculations, we consider the shapes of closed, elastic strips which have been subjected to an inhomogeneous pattern of swelling. The stretching and bending energies of a closed strip are frustrated by compatibility constraints between the curvatures and metric of the strip. To analyze this frustration, we study the class of "conical" closed strips with a prescribed metric tensor on their center line. The resulting strip shapes can be classified according to their number of wrinkles and the prescribed pattern of swelling. We use this class of strips as a variational ansatz to obtain the minimal energy shapes of closed strips and find excellent agreement with the results of a numerical bead-spring model. Within this class of strips, we derive a condition under which a strip can have vanishing mean curvature along the center line.
Motivated by the problem of finding an explicit description of a developable narrow Moebius strip of minimal bending energy, which was first formulated by M. Sadowsky in 1930, we will develop the theory of elastic strips. Recently E.L. Starostin and G.H.M. van der Heijden found a numerical description for an elastic Moebius strip, but did not give an integrable solution. We derive two conservation laws, which describe the equilibrium equations of elastic strips. In applying these laws we find two new classes of integrable elastic strips which correspond to spherical elastic curves. We establish a connection between Hopf tori and force--free strips, which are defined by one of the integrable strips, we have found. We introduce the P--functional and relate it to elastic strips.
Given a planar point set and an integer $k$, we wish to color the points with $k$ colors so that any axis-aligned strip containing enough points contains all colors. The goal is to bound the necessary size of such a strip, as a function of $k$. We show that if the strip size is at least $2k{-}1$, such a coloring can always be found. We prove that the size of the strip is also bounded in any fixed number of dimensions. In contrast to the planar case, we show that deciding whether a 3D point set can be 2-colored so that any strip containing at least three points contains both colors is NP-complete. We also consider the problem of coloring a given set of axis-aligned strips, so that any sufficiently covered point in the plane is covered by $k$ colors. We show that in $d$ dimensions the required coverage is at most $d(k{-}1)+1$. Lower bounds are given for the two problems. This complements recent impossibility results on decomposition of strip coverings with arbitrary orientations. Finally, we study a variant where strips are replaced by wedges.
The strip entropy is studied in this article. We prove that the strip entropy approximation is valid for every ray of a golden-mean tree. This result extends the previous result of [Petersen-Salama, Discrete \& Continuous Dynamical Systems, 2020] on the conventional 2-tree. Lastly, we prove that the strip entropy approximation is valid for eventually periodic rays of a class of Markov-Cayley trees.
We study the texture of helical currents in metallic planar strips in the presence of Rashba spin-orbit coupling (RSOC) on the lattice at zero temperature. In the noninteracting case, and in the absence of external electromagnetic sources, we determine by exact numerical diagonalization of the single-particle Hamiltonian, the distribution across the strip section of these Rashba helical currents (RHC) as well as their sign oscillation, as a function of the RSOC strength, strip width, electron filling, and strip boundary conditions. Then, we study the effects of charge currents introduced into the system by an Aharonov-Bohm flux for the case of rings or by a voltage bias in the case of open strips. The former setup is studied by variational Monte Carlo, and the later, by the time-dependent density-matrix-renormalization group technique. Particularly for strips formed by two, three and four coupled chains, we show how these RHC vary in the presence of such induced charge current, and how their differences between spin-up and spin-down electron currents on each chain, help to explain the distribution across the strip of charge currents, both of the spin conserving and the spin flippin
We have observed again two stars inside the ZZ Ceti instability strip that were previously classified as not-observed-to-vary (NOV) by Mukadam et al. (2004) and found them to be low-amplitude variables. Some evidence points to a pure ZZ Ceti instability strip; other evidence contests it. The two stars previously classified as NOV have Sloan Digital Sky Survey (SDSS) spectroscopic effective temperatures that place them inside the ZZ Ceti instability strip, and they were "contaminating" the strip as constant stars, which could indicate that the instability strip was no longer a simple evolutionary stage. A pure instability strip indicates that pulsation is a normal phase which all DAs must go through. We used effective temperatures derived from SDSS optical spectra by comparing them with model atmospheres to look for pulsators through time-resolved photometry and stars previously classified as NOV. Our new results indicate, but do not prove, a pure instability strip, because there are still other NOV stars that need to be observed again. Additionally, we have discovered five other ZZ Ceti stars based on their effective temperatures.
In this paper we establish a general algorithmic framework between bin packing and strip packing, with which we achieve the same asymptotic bounds by applying bin packing algorithms to strip packing. More precisely we obtain the following results: (1) Any offline bin packing algorithm can be applied to strip packing maintaining the same asymptotic worst-case ratio. Thus using FFD (MFFD) as a subroutine, we get a practical (simple and fast) algorithm for strip packing with an upper bound 11/9 (71/60). A simple AFPTAS for strip packing immediately follows. (2) A class of Harmonic-based algorithms for bin packing can be applied to online strip packing maintaining the same asymptotic competitive ratio. It implies online strip packing admits an upper bound of 1.58889 on the asymptotic competitive ratio, which is very close to the lower bound 1.5401 and significantly improves the previously best bound of 1.6910 and affirmatively answers an open question posed by Csirik et. al.