共找到 20 条结果
Scientific CMOS (sCMOS) image sensors are a modern alternative to typical CCD detectors and are rapidly gaining popularity in observational astronomy due to their large sizes, low read-out noise, high frame rates, and cheap manufacturing. However, numerous challenges remain in using them due to fundamental differences between CCD and CMOS architectures, especially concerning the pixel-dependent and non-Gaussian nature of their read-out noise. One of the main components of the latter is the random telegraph noise (RTN) caused by the charge traps introduced by the defects close to the oxide-silicon interface in sCMOS image sensors, which manifests itself as discrete jumps in a pixel's output signal, degrading the overall image fidelity. In this work, we present a statistical method to detect and characterize RTN-affected pixels using a series of dark frames. Identifying RTN contaminated pixels enables post-processing strategies that mitigate their impact and the development of manufacturing quality metrics.
Many parts of human body generate internal sound during biological processes, which are rich sources of information for understanding health and wellbeing. Despite a long history of development and usage of stethoscopes, there is still a lack of proper tools for recording internal body sound together with complementary sensors for long term monitoring. In this paper, we show our development of a wearable electronic stethoscope, coined Patchkeeper (PK), that can be used for internal body sound recording over long periods of time. Patchkeeper also integrates several state-of-the-art biological sensors, including electrocardiogram (ECG), photoplethysmography (PPG), and inertial measurement unit (IMU) sensors. As a wearable device, Patchkeeper can be placed on various parts of the body to collect sound from particular organs, including heart, lung, stomach, and joints etc. We show in this paper that several vital signals can be recorded simultaneously with high quality. As Patchkeeper can be operated directly by the user, e.g. without involving health care professionals, we believe it could be a useful tool for telemedicine and remote diagnostics.
Forklifts are essential for transporting goods in industrial environments. These machines face wear and tear during field operations, along with rough terrain, tight spaces and complex handling scenarios. This increases the likelihood of unintended impacts, such as collisions with goods, infrastructure, or other machinery. In addition, deliberate misuse has been stated, compromising safety and equipment integrity. This paper presents a low-cost and low-power impact detection system based on multiple wireless sensor nodes measuring 3D accelerations. These were deployed in a measurement campaign covering realworld operational scenarios. An algorithm was developed, based on this collected data, to differentiate high-impact events from normal usage and to localize detected collisions on the forklift. The solution successfully detects and localizes impacts, while maintaining low power consumption, enabling reliable forklift monitoring with multi-year sensor autonomy.
The paper concerns the extension of the Heritage Digital Twin Ontology introduced in previous work to describe the reactivity of digital twins used for cultural heritage documentation by including the semantic description of sensors and activators and all the process of interacting with the real world. After analysing previous work on the use of digital twins in cultural heritage, a summary description of the Heritage Digital Twin Ontology is provided, and the existing applications of digital twins to cultural heritage are overviewed, with references to reviews summarizing the large production of scientific contributions on the topic. Then a novel ontology, named Reactive Digital Twin Ontology is described, in which sensors, activators and the decision processes are also semantically described, turning the previous synchronic approach to cultural heritage documentation into a diachronic one. Some case studies exemplify this theory.
The use of low-cost sensors in conjunction with high-precision instrumentation for air pollution monitoring has shown promising results in recent years. One of the main challenges for these sensors has been the quality of their data, which is why the main efforts have focused on calibrating the sensors using machine learning techniques to improve the data quality. However, there is one aspect that has been overlooked, that is, these sensors are mounted on nodes that may have energy consumption restrictions if they are battery-powered. In this paper, we show the usual sensor data gathering process and we study the existing trade-offs between the sampling of such sensors, the quality of the sensor calibration, and the power consumption involved. To this end, we conduct experiments on prototype nodes measuring tropospheric ozone, nitrogen dioxide, and nitrogen monoxide at high frequency. The results show that the sensor sampling strategy directly affects the quality of the air pollution estimation and that each type of sensor may require different sampling strategies. In addition, duty cycles of 0.1 can be achieved when the sensors have response times in the order of two minutes, and
Low-cost sensors (LCS) are affordable, compact, and often portable devices designed to measure various environmental parameters, including air quality. These sensors are intended to provide accessible and cost-effective solutions for monitoring pollution levels in different settings, such as indoor, outdoor and moving vehicles. However, the data produced by LCS is prone to various sources of error that can affect accuracy. Calibration is a well-known procedure to improve the reliability of the data produced by LCS, and several developments and efforts have been made to calibrate the LCS. This work proposes a novel Estimated Error Augmented Two-phase Calibration (\textit{EEATC}) approach to calibrate the LCS in stationary and mobile deployments. In contrast to the existing approaches, the \textit{EEATC} calibrates the LCS in two phases, where the error estimated in the first phase calibration is augmented with the input to the second phase, which helps the second phase to learn the distributional features better to produce more accurate results. We show that the \textit{EEATC} outperforms well-known single-phase calibration models such as linear regression models (single variable li
In this work, we experimentally investigate the frequency limit of Hall effect sensor designs based on a 2 dimensional electron gas (2DEG) gallium arsenide/aluminum gallium arsenide (GaAs/AlGaAs) heterostructure. The frequency limit is measured and compared for four GaAs/AlGaAs Hall effect sensor designs where the Ohmic contact length (contact geometry) is varied across the four devices. By varying the geometry, the trade-off in sensitivity and frequency limit is explored and the underlying causes of the frequency limit from the resistance and capacitance perspective is investigated. Current spinning, the traditional method to remove offset noise, imposes a practical frequency limit on Hall effect sensors. The frequency limit of the Hall effect sensor, without current spinning, is significantly higher. Wide-frequency Hall effect sensors can measure currents in power electronics that operate at higher frequencies is one such application.
Low-cost particulate matter sensors are transforming air quality monitoring because they have lower costs and greater mobility as compared to reference monitors. Calibration of these low-cost sensors requires training data from co-deployed reference monitors. Machine Learning based calibration gives better performance than conventional techniques, but requires a large amount of training data from the sensor, to be calibrated, co-deployed with a reference monitor. In this work, we propose novel transfer learning methods for quick calibration of sensors with minimal co-deployment with reference monitors. Transfer learning utilizes a large amount of data from other sensors along with a limited amount of data from the target sensor. Our extensive experimentation finds the proposed Model-Agnostic- Meta-Learning (MAML) based transfer learning method to be the most effective over other competitive baselines.
Resonant sensors determine a sensed parameter by measuring the resonance frequency of a resonator. For fast continuous sensing, it is desirable to operate resonant sensors in a closed-loop configuration, where a feedback loop ensures that the resonator is always actuated near its resonance frequency, so that the precision is maximized even in the presence of drifts or fluctuations of the resonance frequency. However, in a closed-loop configuration, the precision is not only determined by the resonator itself, but also by the feedback loop, even if the feedback circuit is noiseless. Therefore, to characterize the intrinsic precision of resonant sensors, the open-loop configuration is often employed. To link these measurements to the actual closed-loop performance of the resonator, it is desirable to have a relation that determines the closed-loop precision of the resonator from open-loop characterisation data. In this work, we present a methodology to estimate the closed-loop resonant sensor precision by relying only on an open-loop characterization of the resonator. The procedure is beneficial for fast performance estimation and benchmarking of resonant sensors, because it does not
We propose a kernel-PCA based method to detect anomaly in chemical sensors. We use temporal signals produced by chemical sensors to form vectors to perform the Principal Component Analysis (PCA). We estimate the kernel-covariance matrix of the sensor data and compute the eigenvector corresponding to the largest eigenvalue of the covariance matrix. The anomaly can be detected by comparing the difference between the actual sensor data and the reconstructed data from the dominant eigenvector. In this paper, we introduce a new multiplication-free kernel, which is related to the l1-norm for the anomaly detection task. The l1-kernel PCA is not only computationally efficient but also energy-efficient because it does not require any actual multiplications during the kernel covariance matrix computation. Our experimental results show that our kernel-PCA method achieves a higher area under curvature (AUC) score (0.7483) than the baseline regular PCA method (0.7366).
This paper presents a comprehensive review of methods covering significant subjective and objective human stress detection techniques available in the literature. The methods for measuring human stress responses could include subjective questionnaires (developed by psychologists) and objective markers observed using data from wearable and non-wearable sensors. In particular, wearable sensor-based methods commonly use data from electroencephalography, electrocardiogram, galvanic skin response, electromyography, electrodermal activity, heart rate, heart rate variability, and photoplethysmography both individually and in multimodal fusion strategies. Whereas, methods based on non-wearable sensors include strategies such as analyzing pupil dilation and speech, smartphone data, eye movement, body posture, and thermal imaging. Whenever a stressful situation is encountered by an individual, physiological, physical, or behavioral change is induced which help in coping with the challenge at hand. A wide range of studies has attempted to establish a relationship between these stressful situations and the response of human beings by using different kinds of psychological, physiological, physi
The rapid growth of the satellite industry has driven a significant increase in geospatial data acquisition, highlighting a critical bottleneck: the severe disparity between the volume of collected sensor data and the limited downlink bandwidth available to ground stations. While On-Board Computing (OBC) has helped address this by pre-processing data in orbit, this article further advances the paradigm by introducing an in-sensor computing framework. We present an optimized end-to-end Earth Observation (EO) pipeline tailored for strict computational constraints by integrating TinyML techniques with the Sony IMX500 Intelligent Vision Sensor. Specifically, our approach shifts processing directly to the sensor level, offloading the computation from the primary embedded device, and effectively mitigating the downlink transmission of noisy or irrelevant data. We evaluated several efficient Convolutional Neural Networks (ConvNets), i.e., SqueezeNet, ShuffleNetV2, and MCUNetV1, on the EuroSAT dataset. Experimental results show that, despite the optimizations required for deployment on the IMX500 platform, our models maintain a competitive 96.68% accuracy while operating within its 8 MB co
Accurate calibration of sensor extrinsic parameters for ground robotic systems (i.e., relative poses) is crucial for ensuring spatial alignment and achieving high-performance perception. However, existing calibration methods typically require complex and often human-operated processes to collect data. Moreover, most frameworks neglect acoustic sensors, thereby limiting the associated systems' auditory perception capabilities. To alleviate these issues, we propose an observability-aware active calibration method for ground robots with multimodal sensors, including a microphone array, a LiDAR (exteroceptive sensors), and wheel encoders (proprioceptive sensors). Unlike traditional approaches, our method enables active trajectory optimization for online data collection and calibration, contributing to the development of more intelligent robotic systems. Specifically, we leverage the Fisher information matrix (FIM) to quantify parameter observability and adopt its minimum eigenvalue as an optimization metric for trajectory generation via B-spline curves. Through planning and replanning of robot trajectory online, the method enhances the observability of multi-sensor extrinsic parameters
The use of capacitance sensors for fuel mass gauging has been in consideration since the early days of manned space flight. However, certain difficulties arise when considering tanks in microgravity environments. Surface tension effects lead to fluid wetting of the interior surface of the tank, leaving large interior voids, while thrust/settling effects can lead to dispersed two-phase mixtures. With the exception of capacitance-based sensing, few sensing technologies are well suited for measuring annular, stratified, and dispersed fluid configurations. Two modalities of capacitance measurement are compared: Electrical Capacitance Volume Tomography (ECVT) and Electrical Capacitance Volume Sensing (ECVS). ECVT is a non-invasive imaging modality first introduced in 2006. ECVS is a measurement modality introduced in this paper that is derived from ECVT technology but does not reconstruct an image as part of the mass measurement. To optimize the design of future capacitance-based spherical tank mass gauging sensors, different electrode plate layouts are evaluated in a mass gauging context. Prototype sensors are constructed, and experiments are conducted with fluid fills in various orien
Plantar pressure measurement, or pedobarography, is an essential tool for analyzing human motion in healthy individuals and patients. Across the reviewed literature, sensor insoles are motivated as wearable, mobile solutions for assessing pressure distribution in applications including diabetic foot monitoring, rehabilitation guidance, assistive device control, and sports performance analysis. This review evaluates the current state of the art with particular attention to sensor technologies, sensor quantity and placement, participant cohorts, and reference standards. The focus lies on original works with innovative designs, preferably supported by ambulation experiments. The modalities covered include resistive, capacitive, inductive, piezoelectric, triboelectric, and optical sensing approaches. We identify a lack of proper sensor calibration, gait-based verification, and human study validation, and propose a gold standard based on testing machines and instrumented treadmills to ensure comparability across studies. The bidirectional interaction between insole insertion and foot-sole mechanics is examined, with tissue stiffness identified as a key source of uncertainty in sensor si
Accurate direction-of-arrival estimation with hybrid analog--digital millimeter-wave sensor arrays is important for localization, environment sensing, and measurement beam control for sensing applications. However, the limited number of radio-frequency chains and training beams in practical hardware makes it difficult to approach the angular resolution of fully digital arrays. This paper develops a covariance-guided discrete Fourier transform (DFT) beam selection framework tailored to beamspace ESPRIT for hybrid millimeter-wave receivers. A short hybrid training phase realizes a virtual centro-symmetric subarray and yields a sample covariance that is processed by forward--backward averaging, nonnegative least-squares power and noise fitting, and a Toeplitz positive-semidefinite projection to reconstruct a denoised full-aperture covariance matrix. This covariance is then used to score and select, within each coarse sector, small contiguous blocks of DFT beams that concentrate signal energy and preserve effective aperture under a strict beam budget. The selected beams feed a sparse beamspace ESPRIT stage that operates only on actually available adjacent beam pairs, so that the overal
Near-sensor diagnosis has become increasingly prevalent in industry. This study proposes a lightweight model named LD-RPMNet that integrates Transformers and Convolutional Neural Networks, leveraging both local and global feature extraction to optimize computational efficiency for a practical railway application. The LD-RPMNet introduces a Multi-scale Depthwise Separable Convolution (MDSC) module, which decomposes cross-channel convolutions into pointwise and depthwise convolutions while employing multi-scale kernels to enhance feature extraction. Meanwhile, a Broadcast Self-Attention (BSA) mechanism is incorporated to simplify complex matrix multiplications and improve computational efficiency. Experimental results based on collected sound signals during the operation of railway point machines demonstrate that the optimized model reduces parameter count and computational complexity by 50% while improving diagnostic accuracy by nearly 3%, ultimately achieving an accuracy of 98.86%. This demonstrates the possibility of near-sensor fault diagnosis applications in railway point machines.
This paper presents a simple yet effective method for improving the performance of zero-shot learning (ZSL). ZSL classifies instances of unseen classes, from which no training data is available, by utilizing the attributes of the classes. Conventional ZSL methods have equally dealt with all the available attributes, but this sometimes causes misclassification. This is because an attribute that is effective for classifying instances of one class is not always effective for another class. In this case, a metric of classifying the latter class can be undesirably influenced by the irrelevant attribute. This paper solves this problem by taking the importance of each attribute for each class into account when calculating the metric. In addition to the proposal of this new method, this paper also contributes by providing a dataset for pose classification based on wearable sensors, named HDPoseDS. It contains 22 classes of poses performed by 10 subjects with 31 IMU sensors across full body. To the best of our knowledge, it is the richest wearable-sensor dataset especially in terms of sensor density, and thus it is suitable for studying zero-shot pose/action recognition. The presented metho
In this paper, we propose a novel few-shot optimization with HED-LM (Hybrid Euclidean Distance with Large Language Models) to improve example selection for sensor-based classification tasks. While few-shot prompting enables efficient inference with limited labeled data, its performance largely depends on the quality of selected examples. HED-LM addresses this challenge through a hybrid selection pipeline that filters candidate examples based on Euclidean distance and re-ranks them using contextual relevance scored by large language models (LLMs). To validate its effectiveness, we apply HED-LM to a fatigue detection task using accelerometer data characterized by overlapping patterns and high inter-subject variability. Unlike simpler tasks such as activity recognition, fatigue detection demands more nuanced example selection due to subtle differences in physiological signals. Our experiments show that HED-LM achieves a mean macro F1-score of 69.13$\pm$10.71%, outperforming both random selection (59.30$\pm$10.13%) and distance-only filtering (67.61$\pm$11.39%). These represent relative improvements of 16.6% and 2.3%, respectively. The results confirm that combining numerical similarit
This chapter reviews the mechanisms by which sensors gather information from the physical world and transform it into the electronic signals that are used in today's information and control systems. It introduces a new methodology for describing sensing mechanisms based on the process of information flow and applies it to the broad spectrum of sensors, instruments and data input devices in current use. We identify four distinct elemental transduction processes: energy conversion, energy dispersion, energy modulation and modulation of a material property. We posit that these four mechanisms form a complete set for describing information transduction in sensing systems.