Current limits of harvested energy in wearables are governed by three fundamental quantities, the physical limits of available energy density in ambient powering, safety limits in intentional powering, and the size of the wearable device. Typical energy harvested, except for solar power in favorable outdoor conditions, ranges from 5 uW to a maximum of 100 - 200 uW depending upon the available energy. Further, traditional intentional powering methodologies using ultrasound and radio-frequency either have a severe limitation in range of powering or are inefficient due to high path loss in Non-Line-of-Sight scenarios due to absorption by the body. In this study, we propose a novel approach using the human body, the common medium connecting the wearable devices, as a channel to transfer power. We demonstrate Human Body Powering using ``Step-to-Charge," a first-of-its-kind non-radiative, meter-scale powering methodology using a floor-based source and the human body as the channel to transfer power at lower channel losses to charge and power wearable devices across the whole body. The proposed powering methodology allows more than 2 mW peak power to be transferred to a wearable device fo
The terahertz (THz) band has attracted significant interest for future wireless networks. In this paper, a THz integrated sensing communications and powering (THz-ISCAP) system, where sensing is leveraged to enhance communications and powering, is studied. For a given total amount of time, we aim to determine an optimal time allocation for sensing to improve the efficiency of communications and powering, along with an optimal power splitting ratio to balance these two functionalities. This is achieved by maximizing between communications and powering either the achievable rate or harvested energy while ensuring a minimum requirement on the other. Numerical results indicate that the optimal system performance can be achieved by jointly optimizing the sensing time allocation and the power splitting ratio. Additionally, the results reveal the effects of various factors, such as THz frequencies and antenna aperture sizes, on the system performance. This study provides some interesting results to offer a new perspective for the research on THz-ISCAP.
Integrated sensing, communication, and powering (ISCAP) has emerged as a promising solution for enabling multi-functionality in 6G networks. However, it poses a significant challenge in the design of multi-functional waveforms that must jointly consider communication, sensing, and powering performance. In this paper, we propose a novel rate-splitting multiple access (RSMA)-enabled multi-functional ISCAP network, where RSMA facilitates the use of communication signals to simultaneously achieve all three functionalities. Based on the proposed system model, we investigate the beamforming optimization problem to explore the performance trade-offs among communication, sensing, and power transfer. To efficiently solve this problem, we develop a novel ISCAP-extragradient (ISCAP-EG) algorithm, which transforms the original problem into a sequence of convex subproblems, reformulates the dual problem as a variational inequality, and solves it using the EG method. Numerical results show that the proposed ISCAP-EG algorithm achieves performance equivalent to that of the conventional successive convex approximation (SCA)-based method, while significantly reducing simulation time. Moreover, the
High-voltage CMOS (HV-CMOS) pixel technology is being considered for future Higgs factory experiments. The ATLASPix3.1 chip, with a pitch of 50$μm$ x 150$μm$, fabricated using TSI 180nm HV-CMOS technology, is a full reticle-size monolithic HV-CMOS sensor with shunt-low dropout (LDO) regulators that allow serial powering for multiple sensors. A beam test was conducted at DESY using 3-6 GeV electron beams, with chips operated in triggerless readout mode with zero suppression, demonstrating multi-chip capability. This was further evaluated with hadron beams, both with and without the built-in power regulators. This study presents the electrical characterisations of the shunt-LDO regulators for serial powering and test beam results of ATLASPix3.1 sensors.
This paper studies Integrated Sensing, Communication, and Powering (ISCAP) as a novel framework designed to enhance Internet of Things (IoT) applications within sixth-generation wireless networks. In these applications, in addition to IoT devices requiring an energy supply and receiving information or control data to perform their tasks, the base station serving them must sense the devices and their environment to localize them, thereby improving data transmission and enabling simultaneous power delivery. In our multi-node ISCAP IoT system, we optimize base station beamforming alongside the receiver's power-splitting factor to maximize energy harvesting while adhering to strict communication and sensing constraints. To effectively tackle this non-convex optimization problem, we decompose it into three manageable subproblems and employ several techniques such as semidefinite relaxation and Rayleigh quotient methods to find an efficient solution. Simulation results demonstrate the effectiveness of the proposed design, highlighting performance trade-offs among sensing accuracy, communication reliability, and power transfer efficiency.
A two-coil wearable system is proposed for wireless communication and powering between a transmitter coil in a necklace and a receiver coil in a smart contact lens, where the necklace is invisible in contrast to coils embedded in wearables like spectacles or headbands. Magneto-quasistatic(MQS) field coupling facilitates communication between the transmitter in the necklace and the contact lens receiver, enabling AR/VR and health monitoring. As long as the receiver coil remains within the magnetic field generated by the transmitter, continuous communication is sustained through MQS field coupling despite the misalignments present. Resonant frequency tuning enhances system efficiency. The system's performance was tested for coil misalignments, showing a maximum path loss variation within $10 dB$ across scenarios, indicating robustness. Finite Element Method(FEM) analysis has been used to study the system for efficient wireless data transfer and powering. A communication channel capacity is $4.5 Mbps$ over a $1 MHz$ bandwidth. Simulations show negligible path loss differences with or without human tissues, as magnetic coupling remains unaffected at MQS frequencies below $30 MHz$ due t
This paper considers a multi-functional orthogonal frequency division multiplexing (OFDM) system with integrated sensing, communication, and powering (ISCAP), in which a multi-antenna base station (BS) transmits OFDM signals to simultaneously deliver information to multiple information receivers (IRs), provide energy supply to multiple energy receivers (ERs), and sense potential targets based on the echo signals. To facilitate ISCAP, the BS employs the joint transmit beamforming design by sending dedicated sensing/energy beams jointly with information beams. Furthermore, we consider the beam scanning for sensing, in which the joint beams scan in different directions over time to sense potential targets. In order to ensure the sensing beam scanning performance and meet the communication and powering requirements, it is essential to properly schedule IRs and ERs and design the resource allocation over time, frequency, and space. More specifically, we optimize the joint transmit beamforming over multiple OFDM symbols and subcarriers, with the objective of minimizing the average beampattern matching error of beam scanning for sensing, subject to the constraints on the average communica
Body-coupled powering (BCP) is an innovative wireless power transfer (WPT) technique, recently explored for its potential to deliver power to cutting-edge biomedical implants such as nerve and muscle stimulators. This paper demonstrates the efficient technique of designing WPT systems embedding BCP via galvanic coupling (G-BCP). The G-BCP configuration utilizes two metal circular rings surrounding the body area of interest as the transmitter (TX) electrodes required for galvanic (differential) excitation and a wireless implant as the receiver (RX) equipped with two electrodes for differential power reception accordingly. By focusing on the unique advantages of this approach - such as enhanced targeting accuracy, improved power transfer efficiency (PTE), and favorable tissue penetration characteristics, G-BCP emerges as a superior alternative to traditional WPT methods. A comprehensive analysis is conducted to obtain the optimized device parameters while simultaneously allowing flexible placement of implants at different depths and alignments. To substantiate the proposed design concept, a prototype was simulated in Ansys HFSS, employing a multi-layered tissue medium of 10mm radius
We propose powering a quantum clock with the non-thermal resources offered by the stationary state of an integrable quantum spin chain, driven out of equilibrium by a quench in a parameter of our choice. Analyzing the bias conditions of the clock, we establish a direct connection with the negativity of the steady-state response function. Using experimentally relevant examples of quantum spin chains, we suggest crossing a phase transition point is crucial for optimal performance. The coupling takes place through a global observable and, even in this case, the battery lifespan is found to be extensive in its size.
The widespread use of the Internet of Things has led to the development of large amounts of perception data, making it necessary to develop effective and scalable data analysis tools. Federated Learning emerges as a promising paradigm to address the inherent challenges of power consumption and data privacy in IoT environments. This paper explores the transformative potential of FL in enhancing the longevity of IoT devices by mitigating power consumption and enhancing privacy and security measures. We delve into the intricacies of FL, elucidating its components and applications within IoT ecosystems. Additionally, we discuss the critical characteristics and challenges of IoT, highlighting the need for such machine learning solutions in processing perception data. While FL introduces many benefits for IoT sustainability, it also has limitations. Through a comprehensive discussion and analysis, this paper elucidates the opportunities and constraints of FL in shaping the future of sustainable and secure IoT systems. Our findings highlight the importance of developing new approaches and conducting additional research to maximise the benefits of FL in creating a secure and privacy-focuse
This paper investigates the energy-efficient hybrid beamforming design for a multi-functional integrated sensing, communications, and powering (ISCAP) system. In this system, a base station (BS) with a hybrid analog-digital (HAD) architecture sends unified wireless signals to communicate with multiple information receivers (IRs), sense multiple point targets, and wirelessly charge multiple energy receivers (ERs) at the same time. To facilitate the energy-efficient design, we present a novel HAD architecture for the BS transmitter, which allows dynamic on-off control of its radio frequency (RF) chains and analog phase shifters (PSs) through a switch network. We also consider a practical and comprehensive power consumption model for the BS, by taking into account the power-dependent non-linear power amplifier (PA) efficiency, and the on-off non-transmission power consumption model of RF chains and PSs. We jointly design the hybrid beamforming and dynamic on-off control at the BS, aiming to minimize its total power consumption, while guaranteeing the performance requirements on communication rates, sensing Cramér-Rao bound (CRB), and harvested power levels. The formulation also takes
Matrix powering is a fundamental computational primitive in linear algebra. It has widespread applications in scientific computing and engineering, and underlies the solution of time-homogeneous linear ordinary differential equations, simulation of discrete-time Markov chains, or discovering the spectral properties of matrices with iterative methods. In this paper, we investigate the possibility of speeding up matrix powering of sparse stable Hermitian matrices on a quantum computer. We present two quantum algorithms that can achieve speedup over the classical matrix powering algorithms -- (i) an adaption of quantum-walk based fast forwarding algorithm (ii) an algorithm based on Hamiltonian simulation. Furthermore, by mapping the N-bit parity determination problem to a matrix powering problem, we provide no-go theorems that limit the quantum speedups achievable in powering non-Hermitian matrices.
iPTF15dtg is a Type Ic supernova (SN) showing a broad light curve around maximum light, consistent with massive ejecta if we assume a radioactive-powering scenario. We study the late-time light curve of iPTF15dtg, which turned out to be extraordinarily luminous for a stripped-envelope (SE) SN. We compare the observed light curves to those of other SE SNe and also with models for the $^{56}$Co decay. We analyze and compare the spectra to nebular spectra of other SE SNe. We build a bolometric light curve and fit it with different models, including powering by radioactivity, magnetar powering, as well as a combination of the two. Between 150 d and 750 d past explosion, iPTF15dtg's luminosity declined by merely two magnitudes instead of the six magnitudes expected from $^{56}$Co decay. This is the first spectroscopically-regular SE SN showing this behavior. The model with both radioactivity and magnetar powering provides the best fit to the light curve and appears to be the more realistic powering mechanism. An alternative mechanism might be CSM interaction. However, the spectra of iPTF15dtg are very similar to those of other SE SNe, and do not show signs of strong CSM interaction. iPT
The $N$th power of a polynomial matrix of fixed size and degree can be computed by binary powering as fast as multiplying two polynomials of linear degree in~$N$. When Fast Fourier Transform (FFT) is available, the resulting complexity is \emph{softly linear} in~$N$, i.e.~linear in~$N$ with extra logarithmic factors. We show that it is possible to beat binary powering, by an algorithm whose complexity is \emph{purely linear} in~$N$, even in absence of FFT. The key result making this improvement possible is that the entries of the $N$th power of a polynomial matrix satisfy linear differential equations with polynomial coefficients whose orders and degrees are independent of~$N$. Similar algorithms are proposed for two related problems: computing the $N$th term of a C-finite sequence of polynomials, and modular exponentiation to the power $N$ for bivariate polynomials.
This paper unifies integrated sensing and communication (ISAC) and simultaneous wireless information and power transfer (SWIPT), by investigating a new multi-functional multiple-input multiple-output (MIMO) system integrating wireless sensing, communication, and powering. In this system, one multi-antenna hybrid access point (H-AP) transmits wireless signals to communicate with one multi-antenna information decoding (ID) receiver, wirelessly charge one multi-antenna energy harvesting (EH) receiver, and perform radar sensing for a point target based on the echo signal at the same time. Under this setup, we aim to reveal the fundamental performance tradeoff limits of sensing, communication, and powering, in terms of the estimation Cram{é}r-Rao bound (CRB), achievable communication rate, and harvested energy level, respectively. Towards this end, we define the achievable CRB-rate-energy (C-R-E) region and characterize its Pareto boundary by maximizing the achievable rate at the ID receiver, subject to the estimation CRB requirement for target sensing, the harvested energy requirement at the EH receiver, and the maximum transmit power constraint at the H-AP. We obtain the semi-closed-f
This paper unifies integrated sensing and communication (ISAC) and simultaneous wireless information and power transfer (SWIPT), by investigating a new multi-functional multiple-input multiple-output (MIMO) system integrating wireless sensing, communication, and powering. In this system, one multi-antenna hybrid access point (H-AP) transmits wireless signals to communicate with one multi-antenna information decoding (ID) receiver, wirelessly charge one multi-antenna energy harvesting (EH) receiver, and perform radar target sensing based on the echo signal at the same time. Under this setup, we aim to reveal the fundamental performance tradeoff limits among sensing, communication, and powering, in terms of the estimation Cramer-Rao bound (CRB), achievable communication rate, and harvested energy level, respectively. In particular, we consider two different target models for radar sensing, namely the point and extended targets, for which we are interested in estimating the target angle and the complete target response matrix, respectively. For both models, we define the achievable CRB-rate-energy (C-R-E) region and characterize its Pareto boundary by maximizing the achievable rate at
Spectral algorithms, such as principal component analysis and spectral clustering, typically require careful data transformations to be effective: upon observing a matrix $A$, one may look at the spectrum of $ψ(A)$ for a properly chosen $ψ$. The issue is that the spectrum of $A$ might be contaminated by non-informational top eigenvalues, e.g., due to scale` variations in the data, and the application of $ψ$ aims to remove these. Designing a good functional $ψ$ (and establishing what good means) is often challenging and model dependent. This paper proposes a simple and generic construction for sparse graphs, $$ψ(A) = \1((I+A)^r \ge1),$$ where $A$ denotes the adjacency matrix and $r$ is an integer (less than the graph diameter). This produces a graph connecting vertices from the original graph that are within distance $r$, and is referred to as graph powering. It is shown that graph powering regularizes the graph and decontaminates its spectrum in the following sense: (i) If the graph is drawn from the sparse Erdős-Rényi ensemble, which has no spectral gap, it is shown that graph powering produces a `maximal' spectral gap, with the latter justified by establishing an Alon-Boppana res
An ultra-wide-band impulse-radio (UWB-IR) transmitter (TX) for low-energy biomedical microsystems is presented. High power efficiency is achieved by modulating an LC tank that always resonates in the steady state during transmission. A new clipped-sinusoid scheme is proposed for on-off keying (OOK)-modulation, which is implemented by a voltage clipper circuit with on-chip biasing generation. The TX is designed to provide a high data-rate wireless link within the 3-5 GHz band. The chip was fabricated in 130nm CMOS technology and fully characterized. State-of-the-art power efficiency of 21.3% was achieved at a data-rate of 230Mbps and energy consumption of 21pJ/b. A bit-error-rate (BER) of less than 10^-6 was measured at a distance of 1m without pulse averaging. In addition, simultaneous wireless powering and VCO-based data transmission are supported. A potential extension to a VCO-free all-wireless mode to further reduce the power consumption is also discussed.
Hydrogen will be a central cross-sectoral energy carrier in the decarbonization of the European energy system. This paper investigates how a large-scale deployment of green hydrogen production affects the investments in transmission and generation towards 2060, analyzes the North Sea area with the main offshore wind projects, and assesses the development of an offshore energy hub. Results indicate that the hydrogen deployment has a tremendous impact on the grid development in Europe and in the North Sea. Findings indicate that total power generation capacity increases around 50%. The offshore energy hub acts mainly as a power transmission asset, leads to a reduction in total generation capacity, and is central to unlock the offshore wind potential in the North Sea. The effect of hydrogen deployment on power prices is multifaceted. In regions where power prices have typically been lower than elsewhere in Europe, it is observed that hydrogen increases the power price considerably. However, as hydrogen flexibility relieves stress in high-demand periods for the grid, power prices decrease in average for some countries. This suggests that while the deployment of green hydrogen will lead
The entire CMS silicon pixel detector will be replaced to operate at the High-Luminosity LHC. In this contribution, the new Tracker Endcap Pixel detector will be presented, focusing on a novel concept to provide both power and data connectivity to the modules through a disk-shaped PCB. As this part of the detector also features the longest serial powering chains in the CMS Phase-2 Inner Tracker, emphasis is put on serial powering results and the characterization of the signal integrity.