Improving the efficiency and stability of organic light-emitting diodes (OLEDs) will further expand their present success in display applications. Triplet exciton-polaron quenching (TPQ) is an important cause of limited efficiency and stability in modern phosphorescent OLEDs, where triplet excitons are the emitting species. Lack of understanding of the TPQ mechanism in these OLEDs impedes the development of more efficient and stable OLEDs. We investigate the TPQ mechanism for triplet excitons on a phosphorescent guest interacting with hole polarons on a host. Our quantum-chemical calculations show that at distances relevant for TPQ the Förster approximation for the TPQ rate fails and that dipole-quadrupole coupling is dominant. This resolves a discrepancy between estimates of the TPQ rate obtained from an OLED device study and from the overlap between the emission spectrum of the emitter and absorption spectrum of the charged host. Equivalently to the Förster radius for dipole-dipole TPQ, the dipole-quadrupole TPQ rate can be quantified by a dipole-quadrupole radius obtained from the overlap between the emission spectrum of the emitter and the quadrupolar absorption spectrum of the
One of the primary causes of low light extraction efficiency (LEE) in conventional OLEDs is the trapping of light within the substrate layer. To overcome this limitation, various nanostructures have recently been investigated for integration into different OLED layers, aiming to convert the trapped loss modes into out-coupled light and thereby improve LEE. In this work, we propose a simple yet innovative nanorod array design composed of metal, insulator, and semiconductor-oxide layers, integrated on the bottom surface of the OLED structure. This configuration enhances light extraction through guided surface plasmon-coupled emission (SPCE). Using an inverse design-based optimization approach, the structural parameters of the nanorods were optimized to achieve wavelength-selective LEE enhancement. The periodic MIS nanorod array was optimized via the Particle Swarm Optimization (PSO) algorithm for different emission wavelengths, yielding improvements of 29\%, 30\%, and 51\% at 440 nm, 550 nm, and 540 nm, respectively, compared with conventional OLEDs. In addition, the optimized arrays demonstrate high spectral luminous efficiency (SLE), reduced UV transmittance, and uniform emission d
The AVATAR system utilizes a radiolucent video display to help relax and immobilize pediatric patients during radiotherapy. This study investigates the use of OLED (Organic Light Emitting Diode) displays, which offer superior image quality and faster alignment compared to traditional projector-based systems, albeit with slightly increased thickness. The dose perturbations caused by these screens were assessed to evaluate their suitability for radiotherapy. A 20 cm OLED screen was positioned in the patient's line of sight, between the patient's head and the radiation source. The screen comprises a 0.25 mm thick flexible OLED panel and a custom carbon fiber backing (0.3 to 0.6 mm thick), with most electronic components relocated via ribbon cable. 6 MV portal images were captured with and without the screen to create transmission maps. Additionally, parallel plate ion chamber measurements were taken at the surface and at depth in a solid water phantom. The OLED's radiation tolerance was tested with a 100 Gy dose delivery and 12 months of use in an active radiotherapy linac vault. The portal image transmission maps indicated an average attenuation difference of 0.3\% (SD = 0.37 \%) bet
Controlling light-matter interactions is emerging as a powerful strategy to enhance the performance of organic light-emitting diodes (OLEDs). By embedding the emissive layer in planar microcavities or other modified optical environments, excitons can couple to photonic modes, enabling new regimes of device operation. In the weak-coupling regime, the Purcell effect can accelerate radiative decay, while in the strong-coupling regime, excitons and photons hybridize to form entirely new energy eigenstates with altered dynamics. These effects offer potential solutions to key challenges in OLEDs, such as triplet accumulation and efficiency roll-off, yet demonstrations in the strong-coupling case remain sparse and modest. To systematically understand and optimize photodynamics across the different coupling regimes, we develop a unified quantum master equation model for microcavity OLEDs. The model is then applied to estimate device performance in the different coupling regimes to determine which one is the best.
Lanthanide-based emitters are attracting increasing interest for their potential in high-performance OLEDs due to their narrow emission bands, high photostability, and functional versatility. However, their low radiative rates and poor charge transport properties remain key challenges for efficient device integration. Here, we report the design, synthesis, and characterization of dual-emissive Eu3+ - Yb3+ coordination compounds that exhibit temperature-dependent luminescence intensity ratios (LIR) between the visible and near-infrared regions. These materials enable simultaneous optical thermometry and electroluminescence, with LIR values showing excellent agreement with external thermocouple measurements over a broad temperature range. OLED devices incorporating these complexes demonstrate stable operation, and their luminescence properties are further enhanced by integration with engineered plasmonic metasurfaces. This integration leads to a significant increase in emission directionality and a reduction of the excited-state lifetime via Purcell enhancement, without compromising spectral integrity. Our findings highlight the promise of lanthanide-based coordination compounds as m
Augmented Reality (AR) and Virtual Reality (VR), require miniaturized displays with ultrahigh pixel densities. Here, we demonstrate an individually addressable subwavelength OLED pixel based on a nanoscale electrode capable of supporting plasmonic modes. Our approach is based on the notion that when scaling down pixel size, the 2D planar geometry of conventional organic light-emitting diodes (OLEDs) evolves into a significantly more complex 3D geometry governed by sharp nanoelectrode contours. These cause (i) spatially imbalanced charge carrier transport and recombination, resulting in a low quantum efficiency, and (ii) filament growth, leading to rapid device failure. Here, we circumvent such effects by selectively covering sharp electrode contours with an insulating layer, while utilizing a nano-aperture in flat areas of the electrode. We thereby ensure controlled charge carrier injection and recombination at the nanoscale and suppress filament growth. As a proof of principle, we first demonstrate stable and efficient hole injection from Au nanoelectrodes in hole-only devices with above 90 % pixel yield and longtime operation stability and then a complete vertical OLED pixel with
We present the development of multifunctional blue-emission organic light-emitting diodes (OLEDs) using TADF-exciplex materials. These OLEDs exhibit sensitivity to external stimuli and achieve a maximum external quantum efficiency (EQE) of 11.6 % through partly liquid processing. This technique allows for large-scale production on arbitrary geometries. The potential multifunctionality of the devices arises from their response to low external magnetic fields (up to 100 mT) with an efficiency up to 2.5 % for magnetoconductance, while maximum magneto-electroluminescence effects of 4.1 % were detected. We investigated novel aspects, including the utilization of two organic materials without further doping and the investigation of the impact of 2,2',2''-(1,3,5-Benzinetriyl)-tris(1phenyl-1-H-benzimidazole) (TPBi) processing in liquid and vapor form. The insights gained provide a fundamental understanding regarding the applicability of exciplex (EX) materials for fully solution-processed OLEDs through a deliberate omission of doping. Our work represents a significant advancement on the path towards multifunctional OLED technology, with potential applications in cost-efficient, scalable or
Vision science imposes rigorous requirements for the design and execution of psychophysical studies and experiments. These requirements ensure precise control over variables, accurate measurement of perceptual responses, and reproducibility of results, which are essential for investigating visual perception and its underlying mechanisms. Since different experiments have different requirements, not all aspects of a display system are critical for a given setting. Therefore, some display systems may be suitable for certain types of experiments but unsuitable for others. An additional challenge is that the performance of consumer systems is often highly dependent on specific monitor settings and firmware behavior. Here, we evaluate the performance of four display systems: a consumer LCD gaming monitor, a consumer OLED gaming monitor, a consumer OLED TV, and a VPixx PROPixx projector system. To allow the reader to assess the suitability of these systems for different experiments, we present a range of different metrics: luminance behavior, luminance uniformity across display surface, estimated gamma values and linearity, channel additivity, channel dependency, color gamut, pixel respon
Miniaturization of light-emitting diodes (LEDs) can enable high-resolution augmented and virtual reality displays and on-chip light sources for ultra-broadband chiplet communication. However, unlike silicon scaling in electronic integrated circuits, patterning of inorganic III-V semiconductors in LEDs considerably compromises device efficiencies at submicrometer scales. Here, we present the scalable fabrication of nanoscale organic LEDs (nano-OLEDs), with the highest array density (>84,000 pixels per inch) and the smallest pixel size (~100 nm) ever reported to date. Direct nanomolecular patterning of organic semiconductors is realized by self-aligned evaporation through nanoapertures fabricated on a free-standing silicon nitride film adhering to the substrate. The average external quantum efficiencies (EQEs) extracted from a nano-OLED device of more than 4 megapixels reach up to 10%. At the subwavelength scale, individual pixels act as electroluminescent meta-atoms forming metasurfaces that directly convert electricity into modulated light. The diffractive coupling between nano-pixels enables control over the far-field emission properties, including directionality and polarizati
Organic light-emitting diodes (OLEDs) have redefined lighting with their environment-friendliness and flexibility. However, only 25 % of the electronic states of organic molecules can emit light upon electrical excitation, limiting the overall efficiency of OLEDs. Strong light-matter coupling, achieved by confining light within OLEDs using mirrors, creates hybrid light-matter states known as polaritons, which could "activate" the remaining 75 % electronic triplet states. Here, we study triplet-to-polariton transition and derive rates for both reverse inter-system crossing and triplet-triplet annihilation. In addition, we explore how the harmful singlet-singlet annihilation could be reduced with strong coupling.
The triplet harvesting is a main challenge in organic light-emitting devices (OLEDs), due to the radiative decay of triplet is spin-forbidden. Here, we designed and synthesized two D-A type molecules, TPA-TAZ and TCP. The OLEDs based on them exhibit deep-blue emission and the singlet formation ratios are higher than the simple spin-statistics of 25 %. Specially, a TPA-TAZ-based OLED achieves a maximum EQE of 6.8 %, which is the largest value of the undoped OLEDs with CIE(y)< 0.06 (the EBU blue standard) up to date. Comprehensive experiments eliminate the triplet-harvesting processes of thermally activated delayed fluorescence and triplet-triplet annihilation. Instead, the triplet-polaron interaction induced upconversion from triplet to singlet through one-electron transfer mechanism is proposed, and proven by the magneto-current measurement and quantum chemistry computation. Our results may offer a new route to break through the 25 % upper limit of IQE of fluorescent OLEDs, especially, the deep-blue fluorescent OLEDs.
This study aims to predict the spatio-temporal evolution of physical quantities observed in multi-layered display panels subjected to the drop impact of a ball. To model these complex interactions, graph neural networks have emerged as promising tools, effectively representing objects and their relationships as graph structures. In particular, MeshGraphNets (MGNs) excel in capturing dynamics in dynamic physics simulations using irregular mesh data. However, conventional MGNs often suffer from non-physical artifacts, such as the penetration of overlapping objects. To resolve this, we propose a physics-constrained MGN that mitigates these penetration issues while maintaining high level of accuracy in temporal predictions. Furthermore, to enhance the model's robustness, we explore noise injection strategies with varying magnitudes and different combinations of targeted components, such as the ball, the plate, or both. In addition, our analysis on model stability in spatio-temporal predictions reveals that during the inference, deriving next time-step node positions by predicting relative changes (e.g., displacement or velocity) between the current and future states yields superior acc
The quest for a spin-polarized organic light emitting diode (spin-OLED) is a common goal in the emerging fields of molecular electronics and spintronics. In this device two ferromagnetic electrodes are used to enhance the electroluminescence intensity of the OLED through a magnetic control of the spin polarization of the injected carriers. The major difficulty is that the driving voltage of an OLED device exceeds of a few volts, while spin injection in organic materials is only efficient at low voltages. We report here the fabrication of a spin-OLED that uses a conjugated polymer as bipolar spin collector layer and ferromagnetic electrodes. Through a careful engineering of the organic/inorganic interfaces we have succeeded in obtaining a light-emitting device showing spin-valve effects at high voltages (up to 14 V). This has allowed us to detect a magneto-electroluminescence enhancement on the order of a 2.4 % at 9 V for the antiparallel configuration of the magnetic electrodes. This observation provides evidence for the long-standing fundamental issue of injecting spins from magnetic electrodes into the frontier levels of a molecular semiconductor. Our finding opens the way for th
Displays based on organic light-emitting diode (OLED) technology are appearing on many mobile devices. Unlike liquid crystal displays (LCD), OLED displays consume dramatically different power for showing different colors. In particular, OLED displays are inefficient for showing bright colors. This has made them undesirable for mobile devices because much of the web content is of bright colors. To tackle this problem, we present the motivational studies, design, and realization of Chameleon, a color adaptive web browser that renders web pages with power-optimized color schemes under user-supplied constraints. Driven by the findings from our motivational studies, Chameleon provides end users with important options, offloads tasks that are not absolutely needed in real-time, and accomplishes real-time tasks by carefully enhancing the codebase of a browser engine. According to measure-ments with OLED smartphones, Chameleon is able to re-duce average system power consumption for web browsing by 41% and reduce display power consumption by 64% without introducing any noticeable delay.
Organic light emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) show increased efficiencies due to efficient upconversion of non-emissive triplet states to emissive singlets states via reverse intersystem crossing (RISC). To assess the influence of the characteristic efficiency-enhancing RISC process as well as possible efficiency-limiting effects in operational OLEDs, we performed temperature-dependent measurements of transient electroluminescence (trEL). With kinetic modeling, we quantify and separate the impact of different temperature-dependent depopulation processes and contributions to EL in the established donor:acceptor model system m-MTDATA:3TPYMB. The underlying rate equations adapted for EL measurements on TADF systems include radiative and non-radiative first- and second-order effects. In this way, we are able to evaluate the non-radiative recombination and annihilation processes with respect to their efficiency-limiting effects on these OLEDs. On the one hand, we evaluate the depopulation of intermolecular exciplex triplet states via non-radiative direct triplet decay, RISC and triplet-triplet annihilation (TTA). On the other hand, we det
The impact of organic light emitting diodes (OLEDs) in modern life is witnessed by their wide employment in full-color, energy-saving, flat panel displays and smart-screens; a bright future is likewise expected in the field of solid state lighting. Cyclometalated iridium complexes are the most used phosphorescent emitters in OLEDs due to their widely tunable photophysical properties and their versatile synthesis. Blue-emitting OLEDs, suffer from intrinsic instability issues hampering their long term stability. Backed by computational studies, in this work we studied the sky-blue emitter FIrpic in both ex-situ and in-situ degradation experiments combining complementary, mutually independent, experiments including chemical metathesis reactions, in liquid phase and solid state, thermal and spectroscopic studies and LC-MS investigations. We developed a straightforward protocol to evaluate the degradation pathways in iridium complexes, finding that FIrpic degrades through the loss of the picolinate ancillary ligand. The resulting iridium fragment was than efficiently trapped "in-situ" as BPhen derivative 1. This process is found to be well mirrored when a suitably engineered, FIrpic-bas
Organic light emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) utilize molecular systems with a small energy splitting between singlet and triplet states. This can either be realized in intramolecular charge transfer states of molecules with near-orthogonal donor and acceptor moieties or in intermolecular exciplex states formed between a suitable combination of individual donor and acceptor materials. Here, we investigate 4,4'-(9H,9'H-[3,3'-bicarbazole]-9,9'-diyl)bis(3-(trifluoromethyl) benzonitrile) (pCNBCzoCF3), which shows intramolecular TADF but can also form exciplex states in combination with 4,4',4''-tris[phenyl(m-tolyl)amino]triphenylamine (m-MTDATA). Orange emitting exciplex-based OLEDs additionally generate a sky-blue emission from the intramolecular emitter with an intensity that can be voltage-controlled. We apply electroluminescence detected magnetic resonance (ELDMR) to study the thermally activated spin-dependent triplet to singlet up-conversion in operating devices. Thereby, we can investigate intermediate excited states involved in OLED operation and derive the corresponding activation energy for both, intra- and intermolecular based
Excess heat in organic light emitting diodes (OLEDs) that is produced during their operation may accelerate their degradation and may cause an inhomogeneous brightness distribution, in particular in large area OLEDs. Assessing the quantitative impact of heat excess is difficult, because all decisive processes related to charge transport and emission via charge recombination are thermally activated. For example, electric currents that are elevated due to larger temperatures cause additional Joule heating and increase, hence, the device temperature even further. Here we establish how parameters responsible for heat transport, i.e., the thermal conductivity of the organic layers and the heat transfer coefficient between the device surface and the environment govern the temperature inside the OLED. We establish, relying on three-dimensional drift-diffusion simulations that self-consistently couple thermally-activated charge transport and heat transport, that the thermal conductivity of organic layers is not a bottleneck for heat transport, because the encountered layer thicknesses in realistic device geometries prevent heat accumulation. The heat transfer to the ambient environment is
Open-loop (OL) to closed-loop (CL) gap (OL-CL gap) exists when OL-pretrained policies scoring high in OL evaluations fail to transfer effectively in closed-loop (CL) deployment. In this paper, we unveil the root causes of this systemic failure and propose a practical remedy. Specifically, we demonstrate that OL policies suffer from Observational Domain Shift and Objective Mismatch. We show that while the former is largely recoverable with adaptation techniques, the latter creates a structural inability to model complex reactive behaviors, which forms the primary OL-CL gap. We find that a wide range of OL policies learn a biased Q-value estimator that neglects both the reactive nature of CL simulations and the temporal awareness needed to reduce compounding errors. To this end, we propose a Test-Time Adaptation (TTA) framework that calibrates observational shift, reduces state-action biases, and enforces temporal consistency. Extensive experiments show that TTA effectively mitigates planning biases and yields superior scaling dynamics than its baseline counterparts. Furthermore, our analysis highlights the existence of blind spots in standard OL evaluation protocols that fail to cap
Recent advances in mobile Graphical User Interface (GUI) agents highlight the growing need for comprehensive evaluation benchmarks. While new online benchmarks offer more realistic testing than offline ones, they tend to focus on the agents' task instruction-following ability while neglecting their reasoning and exploration ability. Moreover, these benchmarks do not consider the random noise in real-world mobile environments. This leads to a gap between benchmarks and real-world environments. To addressing these limitations, we propose MobileBench-OL, an online benchmark with 1080 tasks from 80 Chinese apps. It measures task execution, complex reasoning, and noise robustness of agents by including 5 subsets, which set multiple evaluation dimensions. We also provide an auto-eval framework with a reset mechanism, enabling stable and repeatable real-world benchmarking. Evaluating 12 leading GUI agents on MobileBench-OL shows significant room for improvement to meet real-world requirements. Human evaluation further confirms that MobileBench-OL can reliably measure the performance of leading GUI agents in real environments. Our data and code will be released upon acceptance.