搜索结果：Nature plants

Molecular communication (MC) studies biological signals that are found in nature. Most MC literature focuses on particle properties, even though many natural phenomena exhibit wave-like behavior. One such signal is sound waves. Understanding how sound waves are used in nature can help us better utilize this signal in our interactions with our environment. To take a step in this direction, in this paper, we examine how plants process incoming sound waves and take informed actions. Indeed, plants respond to sound, yet no quantitative communication-theoretic model currently explains this behavior. This study develops the first end-to-end acoustic communication framework for plants. The model is formed following the biological steps of the incoming signal, and a mathematical description is constructed at each step following basic biological models. The resulting end-to-end communication-theoretic model is analyzed using MATLAB. Simulations show that a $200$ $Hz$, $20$ $mu Pa$ stimulus elevates cytosolic $Ca^{2+}$ from $150$ $nM$ to $230 \pm 10$ $nM$ within $50$ seconds which can cause root bending in plants in the long run. This work establishes quantitative phytoacoustics, enabling bi

Molecular Communication (MC) is an important communication paradigm found in nature. Odor-based Molecular Communication (OMC) is a specific type of MC with promising potential and a wide range of applications. In this paper, we examine OMC communication between plants in the context of stress communication. Specifically, we explore how plants use Biological Volatile Organic Compounds (BVOCs) to convey information about the stresses they are experiencing to neighboring plants. We constructed an end-to-end mathematical model that discovers the underlying physical and biological phenomena affecting stress communication. To the best of our knowledge, this is the first study to model this end-to-end stress communication. We numerically analyzed our system under different scenarios using MATLAB. Using experimental data from the literature, we demonstrated that continuous gene regulation can approximate BVOC emissions in plants under different stress conditions. Consequently, we applied this model to these stressors and plants to accurately approximate BVOC emissions. We also investigated a modulation method that plants use to send their messages, namely Ratio Shift Keying. Upon analyzing

Plants frequently contain numerous organs, organized in 3D branching systems defining the plant's architecture. Reconstructing the architecture of plants from unstructured observations is challenging because of self-occlusion and spatial proximity between organs, which are often thin structures. To achieve the challenging task, we propose an approach that allows to infer a parameterized representation of the plant's architecture from a given 3D scan of a plant. In addition to the plant's branching structure, this representation contains parametric information for each plant organ, and can therefore be used directly in a variety of tasks. In this data-driven approach, we train a recursive neural network with virtual plants generated using a procedural model. After training, the network allows to infer a parametric tree-like representation based on an input 3D point cloud. Our method is applicable to any plant that can be represented as binary axial tree. We quantitatively evaluate our approach on Chenopodium Album plants on reconstruction, segmentation and skeletonization, which are important problems in plant phenotyping. In addition to carrying out several tasks at once, our metho

Living plants, while contributing to ecological balance and climate regulation, also function as natural sensors capable of transmitting information about their internal physiological states and surrounding conditions. This rich source of data provides potential for applications in environmental monitoring and precision agriculture. With integration into biohybrid systems, we establish novel channels of physiological signal flow between living plants and artificial devices. We equipped *Hedera helix* with a plant-wearable device called PhytoNode to continuously record the plant's electrophysiological activity. We deployed plants in an uncontrolled outdoor environment to map electrophysiological patterns to environmental conditions. Over five months, we collected data that we analyzed using state-of-the-art and automated machine learning (AutoML). Our classification models achieve high performance, reaching macro F1 scores of up to 95 percent in binary tasks. AutoML approaches outperformed manual tuning, and selecting subsets of statistical features further improved accuracy. Our biohybrid living system monitors the electrophysiology of plants in harsh, real-world conditions. This w

The detection of diseases within plants has attracted a lot of attention from computer vision enthusiasts. Despite the progress made to detect diseases in many plants, there remains a research gap to train image classifiers to detect the cacao swollen shoot virus disease or CSSVD for short, pertinent to cacao plants. This gap has mainly been due to the unavailability of high quality labeled training data. Moreover, institutions have been hesitant to share their data related to CSSVD. To fill these gaps, we propose the development of image classifiers to detect CSSVD-infected cacao plants. Our proposed solution is based on VGG16, ResNet50 and Vision Transformer (ViT). We evaluate the classifiers on a recently released and publicly accessible KaraAgroAI Cocoa dataset. Our best image classifier, based on ResNet50, achieves 95.39\% precision, 93.75\% recall, 94.34\% F1-score and 94\% accuracy on only 20 epochs. There is a +9.75\% improvement in recall when compared to previous works. Our results indicate that the image classifiers learn to identify cacao plants infected with CSSVD.

Plants display physical displacements during their growth due to photosynthesis, which converts light into chemical energy. This can be interpreted as plants acting as actuators with a built-in power source. This paper presents a method to create plant robots that move and perform tasks by harnessing the actuation output of plants: displacement and force generated from the growing process. As the target plant, radish sprouts are employed, and their displacement and force are characterized, followed by the calculation of power and energy densities. Based on the characterization, two different plant robots are designed and fabricated: a rotational robot and a gripper. The former demonstrates ground locomotion, achieving a travel distance of 14.6 mm with an average speed of 0.8 mm/h. The latter demonstrates the picking and placing of an object with a 0.1-g mass by the light-controlled open-close motion of plant fingers. A good agreement between the experimental and model values is observed in the specific data of the mobile robot, suggesting that obtaining the actuation characteristics of plants can enable the design and prediction of behavior in plant robots. These results pave the w

Biological entities in nature have developed sophisticated communication methods over millennia to facilitate cooperation. Among these entities, plants are some of the most intricate communicators. They interact with each other through various communication modalities, creating networks that enable the exchange of information and nutrients. In this paper, we explore this collective behavior and its components. We then introduce the concept of agent plants, outlining their architecture and detailing the tasks of each unit. Additionally, we investigate the mycorrhizal fungi-plant symbiosis to extract glucose for energy harvesting. We propose an architecture that converts the chemical energy stored in these glucose molecules into electrical energy. We conduct comprehensive analyses of the proposed architecture to validate its effectiveness.

Psammophilous plants are special plants that flourish in sand moving environments. There are two main mechanisms by which the wind affects these plants: (i) sand drift exposes roots and covers branches--the exposed roots turn into new plants and the covered branches turn into new roots; both mechanisms result in an enhanced growth rate of the psammophilous plant cover of the dunes; (ii) strong winds, often associated with sand movement, tear branches and seed them in nearby locations, resulting in new plants and an enhanced growth rate of the psammophilous plant cover of the dunes. Despite their important role in dune dynamics, to our knowledge, psammophilous plants have never been incorporated into mathematical models of sand dunes. Here, we attempt to model the effects of these plants on sand dune dynamics. We construct a set of three ordinary differential equations for the fractions of surface cover of regular vegetation, biogenic soil crust and psammophilous plants. The latter reach their optimal growth under (i) specific sand drift or (ii) specific wind power. We show that psammophilous plants enrich the sand dune dynamics. Depending on the climatological conditions, it is pos

Since Charles Darwin's time, the study of climbing plants on a cylindrical stake has been the subject of numerous articles in plant biology. One of the main ideas for studying the coiling of an elastic plant stem is to consider the growth of the plant stem in terms of evolution over time. However, as this development takes place over a long time scale, the static study alone has not been studied independently. Our static approach requires us to take into account elasticity, turgor pressure and gravity forces in a first analysis. The aim of this article is to present a simplified model demonstrating why plant stems climb mainly on their circular helix-shaped stakes, with the diameter of the stake playing an important role in plant stem ascent, as does the fineness of the stem. To perform this calculation, for a given mass density, we consider the variational principle of minimum energy. For thin plant stems, we can see, in first approximation, that the effect of gravity and turgor pressure can be neglected with respect to the energy of elasticity, and that the bulk of the calculation concerns elasticity terms.

This paper describes three experiments measuring interaction of humans with garden plants. In particular, body movement of a human conducting eurythmic dances near the plants (beetroots, tomatoes, lettuce) is correlated with the action potential measured by a plant SpikerBox, a device measuring the electrical activity of plants, and the leaf movement of the plant, tracked with a camera. The first experiment shows that our measurement system captures external stimuli identically for different plants, validating the measurement system. The second experiment illustrates that the plants' response is correlated to the movements of the dancer. The third experiment indicates that plants that have been exposed for multiple weeks to eurythmic dancing might respond differently to plants which are exposed for the first time to eurythmic dancing.

Plants need regular and the appropriate amount of watering to thrive and survive. While agricultural robots exist that can spray water on plants and crops such as the , they are expensive and have limited mobility and/or functionality. We introduce a novel autonomous mobile plant watering robot that uses a 6 degree of freedom (DOF) manipulator, connected to a 4 wheel drive alloy chassis, to be able to hold a garden hose, recognize and detect plants, and to water them with the appropriate amount of water by being able to insert a soil humidity/moisture sensor into the soil. The robot uses Jetson Nano and Arduino microcontroller and real sense camera to perform computer vision to detect plants using real-time YOLOv5 with the Pl@ntNet-300K dataset. The robot uses LIDAR for object and collision avoideance and does not need to move on a pre-defined path and can keep track of which plants it has watered. We provide the Denavit-Hartenberg (DH) Table, forward kinematics, differential driving kinematics, and inverse kinematics along with simulation and experiment results

The capability to sense and respond to external mechanical stimuli at various timescales is essential to many physiological aspects in plants, including self-protection, intake of nutrients, and reproduction. Remarkably, some plants have evolved the ability to react to mechanical stimuli within a few seconds despite a lack of muscles and nerves. The fast movements of plants in response to mechanical stimuli have long captured the curiosity of scientists and engineers, but the mechanisms behind these rapid thigmonastic movements still are not understood completely. In this article, we provide an overview of such thigmonastic movements in several representative plants, including Dionaea, Utricularia, Aldrovanda, Drosera, and Mimosa. In addition, we review a series of studies that present biomimetic structures inspired by fast moving plants. We hope that this article will shed light on the current status of research on the fast movements of plants and bioinspired structures and also promote interdisciplinary studies on both the fundamental mechanisms of plants' fast movements and biomimetic structures for engineering applications, such as artificial muscles, multi-stable structures, a

It is well known that a solid (e.g. wood or rubber) can be put under tensile stress by pulling on it. Once a critical stress is overcome, the solid breaks, leaving an empty space. Similarly, due to internal cohesion, a liquid can withstand tension (i.e. negative pressure), up to a critical point where a large bubble spontaneously forms, releasing the tension and leaving a void (the bubble). This process is known as cavitation. While water at negative pressure is metastable, such a state can be long-lived. In fact, water under tension is found routinely in the plant kingdom, as a direct effect of dehydration, e.g. by evaporation. In this chapter, we provide a brief overview of occurrences of water stress and cavitation in plants, then use a simple thermodynamic and fluid mechanical framework to describe the basic physics of water stress and cavitation. We focus specifically on situations close to those in plants, that is water at negative pressure nested within a structure that is solid, but porous and potentially deformable. We also discuss insights from these simple models as well as from experiments with artificial structures mimicking some essential aspects of the structures fou

Shape is an important aspects in recognizing plants. Several approaches have been introduced to identify objects, including plants. Combination of geometric features such as aspect ratio, compactness, and dispersion, or moments such as moment invariants were usually used toidentify plants. In this research, a comparative experiment of 4 methods to identify plants using shape features was accomplished. Two approaches have never been used in plants identification yet, Zernike moments and Polar Fourier Transform (PFT), were incorporated. The experimental comparison was done on 52 kinds of plants with various shapes. The result, PFT gave best performance with 64% in accuracy and outperformed the other methods.

We discuss possible designs and prototypes of computing systems that could be based on morphological development of roots, interaction of roots, and analog electrical computation with plants, and plant-derived electronic components. In morphological plant processors data are represented by initial configuration of roots and configurations of sources of attractants and repellents; results of computation are represented by topology of the roots' network. Computation is implemented by the roots following gradients of attractants and repellents, as well as interacting with each other. Problems solvable by plant roots, in principle, include shortest-path, minimum spanning tree, Voronoi diagram, $α$-shapes, convex subdivision of concave polygons. Electrical properties of plants can be modified by loading the plants with functional nanoparticles or coating parts of plants of conductive polymers. Thus, we are in position to make living variable resistors, capacitors, operational amplifiers, multipliers, potentiometers and fixed-function generators. The electrically modified plants can implement summation, integration with respect to time, inversion, multiplication, exponentiation, logarith

The Anthropocene is causing a global crisis in recent decades. Facing this challenge, increasing attempts are being made to explore the more-than-human-centred perspective in HCI and design. Our research sets out to explore the ways of experiencing and interacting with plants with a case study on the slowness of plants. Utilising existing time-lapse technology, we investigate the role of IoT technologies in associating biological slowness with the networked technological environment of the home. In the experiment, we chose the humidity level of the environment as the variable to synchronise the movement of smart curtains and plants. We propose a relationship-centred strategy that uses an inclusive feature of a microclimate, like humidity, instead of the plant itself, for human-plant interaction. Furthermore, it indicates a 'plant-decentred' perspective to spark critical reflection on the taken-for-granted perception of isolating a person or a plant as an individual entity.

Enceladus is a saturnian satellite that should have liquid water inside of it (subsurface ocean). Measurements and experiments on water plume from Enceladus have revealed that Enceladus' ocean contains several salts such as NaCl. On the Earth, salt in soil has become a serious problem for agriculture, and importance of salt-tolerant plants are indicated. In order to test the effect of Enceladus' water to terrestrial plant, by hydroponic, we tried to grow three salt-tolerant plants (ice plant, swiss chard and salicornia) simulating Enceladus' water (Enceladus Farm project). Using water with 0.33% NaCl and 0.4% NaHCO$_3$, which is consistent with the observations of Enceladus, all plants could grow if they were germinated and grown with pure water until each plant had a few leaves. However, growth rate can be suppressed compared with the plants cultivated with pure water. Because our first test was performed with loose conditions, more works are needed to evaluate the effect of Enceladus' water to plant growth. However, in addition to the works to grow plants on lunar and martian grounds, Enceladus' water may be used to consider properties of plant from wider environment.

Not only does cold climate pose a problem for outdoor plants during winter in the northern hemisphere, but for indoor plants as well: low sunlight, low humidity, and simultaneous cold breezes from windows and heat from radiators all cause problems for indoor plants. People often treat their indoor plants like mere decoration, which can often lead to health issues for the plant or even death of the plant, especially during winter. A plant monitoring system was developed to solve this problem, collecting information on plants' indoor environmental conditions (light, humidity, and temperature) and providing this information in an accessible format for the user. Preliminary functional tests were conducted in similar settings where the system would be used. In addition, the concept was evaluated by interviewing an expert in the field of horticulture. The evaluation results indicate that this kind of system could prove useful; however, the tests indicated that the system requires further development to achieve more practical value and wider usage.

Visually cataloging and quantifying the natural world requires pushing the boundaries of both detailed visual classification and counting at scale. Despite significant progress, particularly in crowd and traffic analysis, the fine-grained, taxonomy-aware plant counting remains underexplored in vision. In contrast to crowds, plants exhibit nonrigid morphologies and physical appearance variations across growth stages and environments. To fill this gap, we present TPC-268, the first plant counting benchmark incorporating plant taxonomy. Our dataset couples instance-level point annotations with Linnaean labels (kingdom -> species) and organ categories, enabling hierarchical reasoning and species-aware evaluation. The dataset features 10,000 images with 678,050 point annotations, includes 268 countable plant categories over 242 plant species in Plantae and Fungi, and spans observation scales from canopy-level remote sensing imagery to tissue-level microscopy. We follow the problem setting of class-agnostic counting (CAC), provide taxonomy-consistent, scale-aware data splits, and benchmark state-of-the-art regression- and detection-based CAC approaches. By capturing the biodiversity,