Terrain segmentation is a fundamental capability for autonomous mobile robots operating in unstructured outdoor environments. However, state-of-the-art models are incompatible with the memory and compute constraints typical of microcontrollers, limiting scalable deployment in small robotics platforms. To address this gap, we develop a complete framework for robust binary terrain segmentation on a low-cost microcontroller. At the core of our approach we design Nano-U, a highly compact binary segmentation network with a few thousand parameters. To compensate for the network's minimal capacity, we train Nano-U via Quantization-Aware Distillation (QAD), combining knowledge distillation and quantization-aware training. This allows the final quantized model to achieve excellent results on the Botanic Garden dataset and to perform very well on TinyAgri, a custom agricultural field dataset with more challenging scenes. We deploy the quantized Nano-U on a commodity microcontroller by extending MicroFlow, a compiler-based inference engine for TinyML implemented in Rust. By eliminating interpreter overhead and dynamic memory allocation, the quantized model executes on an ESP32-S3 with a minim
Surface acoustic waves (SAWs) convey energy at subwavelength depths along surfaces. Using interdigital transducers (IDTs) and opto-acousto-optic transducers (OAOTs), researchers have harnessed coherent SAWs with nanosecond periods and micrometer localization depth for various applications. However, the utilization of cutting-edge OAOTs produced through surface nanopatterning techniques has set the upper limit for coherent SAW frequencies below 100 GHz, constrained by factors such as the quality and pitch of the surface nanopattern, not to mention the electronic bandwidth limitations of the IDTs. In this context, unconventional optically-controlled nano-transducers based on cleaved superlattices (SLs) are here presented as an alternative solution. To demonstrate their viability, we conducted proof-of-concept experiments using ultrafast lasers in a pump-probe configuration on SLs made of alternating AlxGa1-xAs and AlyGa1-yAs layers with approximately 70 nm periodicity and cleaved along their growth direction to produce a periodic nanostructured surface. The acoustic vibrations, generated and detected by laser beams incident on the cleaved surface, span a range from 40 GHz to 70 GHz,
Mutual synchronization of N serially connected spintronic nano-oscillators increases their coherence by a factor $N$ and their output power by $N^2$. Increasing the number of mutually synchronized nano-oscillators in chains is hence of great importance for better signal quality and also for emerging applications such as oscillator-based neuromorphic computing and Ising machines where larger N can tackle larger problems. Here we fabricate spin Hall nano-oscillator chains of up to 50 serially connected nano-constrictions in W/NiFe, W/CoFeB/MgO, and NiFe/Pt stacks and demonstrate robust and complete mutual synchronization of up to 21 nano-constrictions, reaching linewidths of below 200 kHz and quality factors beyond 79,000, while operating at 10 GHz. We also find a square increase in the peak power with the increasing number of mutually synchronized oscillators, resulting in a factor of 400 higher peak power in long chains compared to individual nano-constrictions. Although chains longer than 21 nano-constrictions also show complete mutual synchronization, it is not as robust and their signal quality does not improve as much as they prefer to break up into partially synchronized state
The advancements in nanotechnology, material science, and electrical engineering have shrunk the sizes of electronic devices down to the micro/nanoscale. This brings the opportunity of developing the Internet of Nano Things (IoNT), an extension of the Internet of Things (IoT). With nanodevices, numerous new possibilities emerge in the biomedical, military fields, and industrial products. However, a continuous energy supply is mandatory for these devices to work. At the micro/nanoscale, batteries cannot supply this demand due to size limitations and the limited energy contained in the batteries. Internet of Harvester Nano Things (IoHNT), a concept of Energy Harvesting (EH) integrated with wireless power transmission (WPT) techniques, converts the existing different energy sources into electrical energy and transmits to IoNT nodes. As IoHNTs are not directly attached to IoNTs, it gives flexibility in size. However, we define the size of IoHNTs as up to 10 cm. In this review, we comprehensively investigate the available energy sources and EH principles to wirelessly power IoNTs. We discuss the IoHNT principles, material selections, and state-of-the-art applications of each energy sour
World models have become a central paradigm for learning predictive simulators that support generation, planning, and decision-making. Yet, despite rapid progress in industry-scale interactive video generation, the broader research community still lacks compact, reproducible, and easily extensible implementations for studying the design choices underlying modern world models. We introduce Nano World Models, a minimalist codebase for future video prediction centered around diffusion forcing. Nano World Models provides a unified interface for generative objectives, model scales, action-conditioning mechanisms, latent observation spaces, datasets, evaluation protocols, and long-horizon rollout procedures. This design enables controlled studies of world-modeling components that are often entangled across separate implementations. Through experiments across simple control environments, game simulation, and real-robot data, we examine how prediction parameterization, architecture scale, action injection, sampling budget, and domain complexity affect video prediction quality and autoregressive rollout behavior. By releasing code, configurations, evaluation scripts, and pretrained checkpoi
We present some ideas for synthesizing nanocircuit elements in the optical domain using plasmonic and non-plasmonic nanoparticles. Three basic circuit elements, i.e., nano-inductors, nano-capacitors, and nano-resistors, are discussed in terms of small nanostructures with different material properties. Coupled nanocircuits and parallel and series combinations are also envisioned, which may provide road maps for the synthesis of more complex nanocircuits in the IR and visible bands. Ideas for the optical implementation of right-handed and left-handed nano-transmission lines are also forecasted.
A superconducting quantum interference device (SQUID) miniaturized into nanoscale is promising in the inductive detection of a single electron spin. A nano-SQUID with a strong spin coupling coefficient, a low flux noise, and a wide working magnetic field range is highly desired in a single spin resonance measurement. Nano-SQUIDs with Dayem-bridge junctions excel in a high working field range and in the direct coupling from spins to the bridge. However, the common planar structure of nano-SQUIDs is known for problems such as a shallow flux modulation depth and a troublesome hysteresis in current-voltage curves. Here, we developed a fabrication process for creating three-dimensional (3-D) niobium (Nb) nano-SQUIDs with nano-bridge junctions that can be tuned independently. Characterization of the device shows up to 45.9 % modulation depth with a reversible current-voltage curve. Owning to the large modulation depth, the measured flux noise is as low as 0.34 μΦ$_0$/Hz$^{1/2}$. The working field range of the SQUID is greater than 0.5 T parallel to the SQUID plane. We believe that 3-D Nb nano-SQUIDs provide a promising step toward effective single-spin inductive detection.
The spatially precise integration of arrays of micro-patterned two-dimensional (2D) crystals onto three-dimensionally structured Si/SiO$_2$ substrates represents an attractive strategy towards the low-cost system-on-chip integration of extended functions in silicon microelectronics. However, the reliable integration of the arrays of 2D materials on non-flat surfaces has thus far proved extremely challenging due to their poor adhesion to underlying substrates as ruled by weak van der Waals interactions. Here we report on a novel fabrication method based on nano-subsidence which enables the precise and reliable integration of the micro-patterned 2D materials/silicon photodiode arrays exhibiting high uniformity. Our devices display peak sensitivity as high as 0.35 A/W and external quantum efficiency (EQE) of ca. 90%, outperforming most commercial photodiodes. The nano-subsidence technique opens a viable path to on-chip integrate 2D crystals onto silicon for beyond-silicon microelectronics.
In most of the cases, the experimental study of Nanotechnology involves high cost for Laboratory set-up and the experimentation processes were also slow. So, one cannot rely on experimental nanotechnology alone. As such, the Computer-Based molecular simulations and modeling are one of the foundations of computational nanotechnology. The computer based modeling and simulations were also referred as computational experimentations. In real experiments, the investigator doesn't have full control over the experiment. But, in Computational experimentation the investigator have full control over the experiment. The accuracy of such Computational nano-technology based experiment generally depends on the accuracy of the following things: Intermolecular interaction, Numerical models and Simulation schemes used. Once the accuracy of the Computational Scheme is guaranteed one can use that to investigate various nonlinear interactions whose results are completely unexpected and unforeseen. Apart from it, numerical modeling and computer based simulations also help to understand the theoretical part of the nano-science involved in the nano-system. They allow us to develop useful analytic and pred
We have performed scanning angle-resolved photoemission spectroscopy with a nanometer-sized beam spot (nano-ARPES) on the cleaved surface of Pb5Bi24Se41, which is a member of the (PbSe)5(Bi2Se3)3m homologous series (PSBS) with m = 4 consisting of alternate stacking of the topologically-trivial insulator PbSe bilayer and four quintuple layers (QLs) of the topological insulator Bi2Se3. This allows us to visualize a mosaic of topological Dirac states at a nanometer scale coming from the variable thickness of the Bi2Se3 nano-islands (1-3 QLs) that remain on top of the PbSe layer after cleaving the PSBS crystal, because the local band structure of topological origin changes drastically with the thickness of the Bi2Se3 nano-islands. A comparison of the local band structure with that in ultrathin Bi2Se3 films on Si(111) gives us further insights into the nature of the observed topological states. This result demonstrates that nano-ARPES is a very useful tool for characterizing topological heterostructures.
Spin-wave based transmission and processing of information is a promising emerging nano-technology that can help overcome limitations of traditional electronics based on the transfer of electrical charge. Among the most important challenges for this technology is the implementation of spin-wave devices that can operate without the need for an external bias magnetic field. Here we experimentally demonstrate that this can be achieved using sub-micrometer wide spin-wave waveguides fabricated from ultrathin films of low-loss magnetic insulator - Yttrium Iron Garnet (YIG). We show that these waveguides exhibit a highly stable single-domain static magnetic configuration at zero field and support long-range propagation of spin waves with gigahertz frequencies. The experimental results are supported by micromagnetic simulations, which additionally provide information for optimization of zero-field guiding structures. Our findings create the basis for the development of energy-efficient zero-field spin-wave devices and circuits.
Porous nanosponges, percolated with a three-dimensional network of 10-nm sized ligaments, recently emerged as promising substrates for plasmon-enhanced spectroscopy and (photo-)catalysis. Experimental and theoretical work suggests surface plasmon localization in some hot-spot modes as the physical origin of their unusual optical properties, but so far the existence of such hot-spots has not been proven. Here we use scattering-type scanning near-field nano-spectroscopy on individual gold nanosponges to reveal spatially and spectrally confined modes with 10 nanometer localization lengths by mapping the local optical density of states. High quality factors of individual hot-spots of more than 40 are demonstrated. A statistical analysis of near-field intensity fluctuations unveils plasmonics in the strong localization regime. The observed field localization and enhancement make such nanosponges an appealing platform for a variety of applications ranging from nonlinear optics to strong-coupling physics.
Recent advances in nanotechnology have created tremendous excitement across different disciplines but in order to fully control and manipulate nano-scale objects, we must understand the forces at work at the nano-scale, which can be very different from those that dominate the macro-scale. We show that there is a new kind of curvature-induced force that acts between nano-corrugated electrically neutral plasmonic surfaces. Absent in flat surfaces, such a force owes its existence entirely to geometric curvature, and originates from the kinetic energy associated with the electron density which tends to make the profile of the electron density smoother than that of the ionic background and hence induces curvature-induced local charges. Such a force cannot be found using standard classical electromagnetic approaches, and we use a self-consistent hydrodynamics model as well as first principles density functional calculations to explore the character of such forces. These two methods give qualitative similar results. We found that the force can be attractive or repulsive, depending on the details of the nano-corrugation, and its magnitude is comparable to light induced forces acting on pla
Scalable memories that can match the speeds of superconducting logic circuits have long been desired to enable a superconducting computer. A superconducting loop that includes a Josephson junction can store a flux quantum state in picoseconds. However, the requirement for the loop inductance to create a bi-state hysteresis sets a limit on the minimal area occupied by a single memory cell. Here, we present a miniaturized superconducting memory cell based on a Three-Dimensional (3D) Nb nano-Superconducting QUantum Interference Device (nano-SQUID). The major cell area here fits within an 8*9 μm^2 rectangle with a cross-selected function for memory implementation. The cell shows periodic tunable hysteresis between two neighbouring flux quantum states produced by bias current sweeping because of the large modulation depth of the 3D nano-SQUID (~66%). Furthermore, the measured Current-Phase Relations (CPRs) of nano-SQUIDs are shown to be skewed from a sine function, as predicted by theoretical modelling. The skewness and the critical current of 3D nano-SQUIDs are linearly correlated. It is also found that the hysteresis loop size is in a linear scaling relationship with the CPR skewness
Particulate air pollution results from different sources, among which those related to road traffic have a significant impact on human health. Combustion-derived particles emitted by thermal engines have been incriminated and are now better controlled. In contrast, non-exhaust emission sources related to car wear and degradation processes are not yet regulated. Here we report on brake wear particles (BWP) harvested in two test facilities operating in France, providing samples from different braking systems and driving/testing conditions. Using a combination of light scattering, X-ray fluorescence, optical and electron microscopy, the particle size and elemental composition are revealed. The BWP are shown to be in the nano- to micrometer range and to have a low carbonaceous content (6%), iron and copper being the main components (> 40%). To evaluate the toxicity potential of its nano-sized fraction, brake wear nanoparticles are isolated by sonication, filtration and ultra-centrifugation techniques, leading to stable colloidal dispersions. A significant outcome of this study is that the nano-sized fraction represents 26% by mass of the initial BWP. Human bronchial epithelial cells
In celebration of the 2025 UN International Year of Quantum Science and Technology, this Resource Letter surveys the rapidly-growing field of scholarship in quantum information science and engineering (QISE) education. It is primarily written as a guide for educators wishing to get started teaching QISE using research-based teaching methods, as well as for discipline-based education research (DBER) practitioners looking to get started in this field. Topics covered include scoping the field of QISE education, research into student reasoning in QISE, research-based and research-inspired curricular materials from the high school to graduate level, research-based assessments, simulation and gamification tools, and tools for incorporating discussion of the societal and ethical implications of quantum technologies into the classroom.
Quantum sensors based on solid-state spins provide tremendous opportunities in a wide range of fields from basic physics and chemistry to biomedical imaging. However, integrating them into a scanning probe microscope to enable practical, nanoscale quantum imaging is a highly challenging task. Recently, the use of single spins in diamond in conjunction with atomic force microscopy techniques has allowed significant progress towards this goal, but generalisation of this approach has so far been impeded by long acquisition times or by the absence of simultaneous topographic information. Here we report on a scanning quantum probe microscope which solves both issues, by employing a nano-spin ensemble hosted in a nanodiamond. This approach provides up to an order of magnitude gain in acquisition time, whilst preserving sub-100 nm spatial resolution both for the quantum sensor and topographic images. We demonstrate two applications of this microscope. We first image nanoscale clusters of maghemite particles through both spin resonance spectroscopy and spin relaxometry, under ambient conditions. Our images reveal fast magnetic field fluctuations in addition to a static component, indicatin
Clustering and dynamics of nano-sized particles (nano dust) is investigated using high-resolution ($1024^3$) simulations of compressible isothermal hydrodynamic turbulence, intended to mimic the conditions inside cold molecular clouds in the interstellar medium. Nano-sized grains may cluster in a turbulent flow (small-scale clustering), which increases the local grain density significantly. Together with the increased interaction rate due to turbulent motions, aggregation of interstellar nano-dust may be plausible.
Previous studies on ultrasound-propelled nano- and microparticles have considered only systems where the particle orientation is perpendicular to the direction of propagation of the ultrasound. However, in future applications of these particles, they will typically be able to attain also other orientations. Therefore, using direct acoustofluidic simulations, we here study how the propulsion of cone-shaped nano- and microparticles, which are known to have a particularly efficient acoustic propulsion and are therefore promising candidates for future applications, depends on their orientation relative to the propagation direction of a traveling ultrasound wave. Our results reveal that the propulsion of the particles depends strongly on their orientation relative to the direction of wave propagation and that the particles tend to orient perpendicularly to the wave direction. We also present the orientation-averaged translational and angular velocities of the particles, which correspond to the particles' effective propulsion for an isotropic exposure to ultrasound. Our results allow assessing how free ultrasound-propelled colloidal particles move in three spatial dimensions and thus con
Graphene-based heterostructures display a variety of phenomena that are strongly tunable by electrostatic local gates. Monolayer graphene (MLG) exhibits tunable surface plasmon polaritons, as revealed by scanning nano-infrared experiments. In bilayer graphene (BLG), an electronic gap is induced by a perpendicular displacement field. Gapped BLG is predicted to display unusual effects such as plasmon amplification and domain wall plasmons with significantly larger lifetime than MLG. Furthermore, a variety of correlated electronic phases highly sensitive to displacement fields have been observed in twisted graphene structures. However, applying perpendicular displacement fields in nano-infrared experiments has only recently become possible (Ref. 1). In this work, we fully characterize two approaches to realizing nano-optics compatible top-gates: bilayer $\text{MoS}_2$ and MLG. We perform nano-infrared imaging on both types of structures and evaluate their strengths and weaknesses. Our work paves the way for comprehensive near-field experiments of correlated phenomena and plasmonic effects in graphene-based heterostructures.