搜索结果：Mount

This paper introduces neck-mounted view gaze estimation, a new task that estimates user gaze from the neck-mounted camera perspective. Prior work on egocentric gaze estimation, which predicts device wearer's gaze location within the camera's field of view, mainly focuses on head-mounted cameras while alternative viewpoints remain underexplored. To bridge this gap, we collect the first dataset for this task, consisting of approximately 4 hours of video collected from 8 participants during everyday activities. We evaluate a transformer-based gaze estimation model, GLC, on the new dataset and propose two extensions: an auxiliary gaze out-of-bound classification task and a multi-view co-learning approach that jointly trains head-view and neck-view models using a geometry-aware auxiliary loss. Experimental results show that incorporating gaze out-of-bound classification improves performance over standard fine-tuning, while the co-learning approach does not yield gains. We further analyze these results and discuss implications for neck-mounted gaze estimation.

The elevation of Mount Rainier was last surveyed in 2010 by the Land Surveyors Association of Washington. More recent LiDAR data and observational reports have indicated that the historical highest point on the mountain, Columbia Crest, has lost a significant amount of elevation and may no longer be the highest point. This report documents the results of multiple ground surveys conducted in August and September 2024 to determine the current elevation of Columbia Crest and the current elevation and location of the summit of Mt Rainier. On August 28, 2024, a Promark 220 differential GPS unit was used to measure the elevation of Columbia Crest and the Southwest Rim, two recognized historical local maxima on the rim of the summit caldera. Columbia Crest is a year-round ice-capped locality, while the Southwest Rim melts to rock each summer. Measurements were corroborated with Abney level measurements and LiDAR data from 2007 and 2022. On September 21 and 22, 2024, additional ground measurements were taken with the Promark 220 of the Summit 2 USGS monument location and of the highest rock on the Southwest Rim. Additionally, the three USGS monuments lower on the mountain (Muir, McClure, a

The aim of this work is to enable quadrupedal robots to mount skateboards using Reverse Curriculum Reinforcement Learning. Although prior work has demonstrated skateboarding for quadrupeds that are already positioned on the board, the initial mounting phase still poses a significant challenge. A goal-oriented methodology was adopted, beginning with the terminal phases of the task and progressively increasing the complexity of the problem definition to approximate the desired objective. The learning process was initiated with the skateboard rigidly fixed within the global coordinate frame and the robot positioned directly above it. Through gradual relaxation of these initial conditions, the learned policy demonstrated robustness to variations in skateboard position and orientation, ultimately exhibiting a successful transfer to scenarios involving a mobile skateboard. The code, trained models, and reproducible examples are available at the following link: https://github.com/dancher00/quadruped-skateboard-mounting

In 2024, we discovered that Columbia Crest, the historical summit of Mount Rainier, was no longer the highest point on the mountain. Instead, a point 133 m (436 ft) to the south along the southwest rim (SW Rim) was determined to be the new highest point on Mount Rainier. The Columbia Crest icecap melted down 6.64 m (21.8 ft) since 1998. A nearby peak, Liberty Cap, melted down 8.02 m (26.3 ft) since 2007. For this report, updated elevation measurements were taken in late summer 2025 of Columbia Crest and Liberty Cap. Columbia Crest melted an additional 0.37 m (1.2 ft) and Liberty Cap melted 0.67 m (2.2 ft) over the last year. To understand how Mount Rainier's summit may continue to evolve, we used ground-penetrating radar (GPR) to measure the thickness of the Columbia Crest icecap and Liberty Cap. As of 2025, ice is approximately 2 m - 5 m (6.6 ft - 16.5 ft) thick near the summit of Columbia Crest and 10 m - 13 m (32.8 ft - 42.7ft) thick near the summit of Liberty Cap. Using recent measurements by our team and other surveyors, melt rates for Columbia Crest have been -0.27 m/year (-0.9 ft/year) since 1998 (R squared = 0.990) and -0.49 m/year (-1.6 ft/year) for Liberty Cap since 2007

Here we present a flexible tip mount for eversion (vine) robots. This soft cap allows attaching a payload to an eversion robot while allowing moving through narrow openings, as well as the eversion of protruding objects, and expanded surfaces.

The revolution of natural language processing via large language models has motivated its use in multidisciplinary areas that include social sciences and humanities and more specifically, comparative religion. Sentiment analysis provides a mechanism to study the emotions expressed in text. Recently, sentiment analysis has been used to study and compare translations of the Bhagavad Gita, which is a fundamental and sacred Hindu text. In this study, we use sentiment analysis for studying selected chapters of the Bible. These chapters are known as the Sermon on the Mount. We utilize a pre-trained language model for sentiment analysis by reviewing five translations of the Sermon on the Mount, which include the King James version, the New International Version, the New Revised Standard Version, the Lamsa Version, and the Basic English Version. We provide a chapter-by-chapter and verse-by-verse comparison using sentiment and semantic analysis and review the major sentiments expressed. Our results highlight the varying sentiments across the chapters and verses. We found that the vocabulary of the respective translations is significantly different. We detected different levels of humour, op

We present a novel dataset and a novel algorithm for recognizing activities of daily living (ADL) from a first-person wearable camera. Handled objects are crucially important for egocentric ADL recognition. For specific examination of objects related to users' actions separately from other objects in an environment, many previous works have addressed the detection of handled objects in images captured from head-mounted and chest-mounted cameras. Nevertheless, detecting handled objects is not always easy because they tend to appear small in images. They can be occluded by a user's body. As described herein, we mount a camera on a user's wrist. A wrist-mounted camera can capture handled objects at a large scale, and thus it enables us to skip object detection process. To compare a wrist-mounted camera and a head-mounted camera, we also develop a novel and publicly available dataset that includes videos and annotations of daily activities captured simultaneously by both cameras. Additionally, we propose a discriminative video representation that retains spatial and temporal information after encoding frame descriptors extracted by Convolutional Neural Networks (CNN).

We present a basic tutorial for implementing surface mount technology in lab-built scientific instruments. We discuss the advantages and disadvantages of using surface mount chips. We also describe methods for the development and prototyping of surface mount circuitry in home-built electronics. The method of soldering surface mount components in a common toaster oven is described. We provide advice from our own experience in developing this technology, and argue that surface mount technology is often preferable to using leaded components when building large circuits, and is essential if the desired component characteristics are only available in surface mount packages.

We present a simple motorised rotation mount for a half-wave plate that can be used to rapidly change the polarization of light. We use the device to switch a high power laser beam between different optical dipole traps in an ultracold atom experiment. The device uses a stepper motor with a hollow shaft, which allows a beam to propagate along the axis of the motor shaft, minimising inertia and mechanical complexity. A simple machined adapter is used to mount the wave plate. We characterise the performance of the device, focusing on its capability to switch a beam between the output ports of a polarizing beamsplitter cube. We demonstrate a switching time of 15.9(3) ms, limited by the torque of the motor. The mount has a reaction time of 0.52(3) ms, and a rotational resolution of 0.45 degrees. The rotation is highly reproducible, with the stepper motor not missing a step in 2000 repeated tests over 11 hours.

I report on the development of new code to support the Nasmyth and E-W antenna mount types in AIPS which will allow polarisation analysis of observations made using these uncommon antenna configurations. These mount types may become more widely spread as they have several advantages, particularly for geodetic observatories. Multi-band observations, with multiple receivers, can only be fitted into telescopes with Nasmyth feeds. These are the requirements for the new generation of geodetic arrays as discussed in IVS2010. Further more the next generation of antennae will also be required to have very high slew rates, and these can be achieved with the E-W mount. The mount type affects the differential phase between the left and the right hand circular polarisations (LHC and RHC) for different points on the sky. The target antennae for the project was the Yebes 40m telescope, but as that was still under construction the data used as a demonstration was from the Pico Veleta antenna as part of the Global Millimeter VLBI Array (GMVA). For the E-W mount type there are suitable data from the Australian LBA array. I demonstrate the effectiveness of the changes made and that the Nasmyth and E

Pneumatically operated soft growing robots that extend via tip eversion are well-suited for navigation in confined spaces. Adding the ability to interact with the environment using sensors and tools attached to the robot tip would greatly enhance the usefulness of these robots for exploration in the field. However, because the material at the tip of the robot body continually changes as the robot grows and retracts, it is challenging to keep sensors and tools attached to the robot tip during actuation and environment interaction. In this paper, we analyze previous designs for mounting to the tip of soft growing robots, and we present a novel device that successfully remains attached to the robot tip while providing a mounting point for sensors and tools. Our tip mount incorporates and builds on our previous work on a device to retract the robot without undesired buckling of its body. Using our tip mount, we demonstrate two new soft growing robot capabilities: (1) pulling on the environment while retracting, and (2) retrieving and delivering objects. Finally, we discuss the limitations of our design and opportunities for improvement in future soft growing robot tip mounts.

Mount Tai has abundant sunshine, abundant rainfall and favorable climatic conditions, forming dense vegetation with various kinds of trees. In order to make it easier for tourists to understand each tree and experience the culture of Mount Tai, this paper develops an App for tree recognition of Mount Tai based on convolution neural network (CNN), taking advantage of CNN efficient image recognition ability and easy-to-carry characteristics of Android mobile phone. The APP can accurately identify several common trees in Mount Tai, and give a brief introduction for tourists.

We analyze the performance of a microwave chip mount that uses wirebonds to connect the chip and mount grounds. A simple impedance ladder model predicts that transmission crosstalk between two feedlines falls off exponentially with distance at low frequencies, but rises to near unity above a resonance frequency set by the chip to ground capacitance. Using SPICE simulations and experimental measurements of a scale model, the basic predictions of the ladder model were verified. In particular, by decreasing the capacitance between the chip and box grounds, the resonance frequency increased and transmission decreased. This model then influenced the design of a new mount that improved the isolation to -65 dB at 6 GHz, even though the chip dimensions were increased to 1 cm by 1 cm, 3 times as large as our previous devices. We measured a coplanar resonator in this mount as preparation for larger qubit chips, and were able to identify cavity, slotline, and resonator modes.

We present two complementary designs of pneumatically actuated and kinematically positioned optics mounts: one designed for vertical mounting and translation, the other designed for horizontal mounting and translation. The design and measured stability make these mounts well-suited to experiments with laser-cooled atoms.

The Cherenkov Telescope Array is the next generation ground-based observatory for the study of very-high-energy gamma-rays. It will provide an order of magnitude more sensitivity and greater angular resolution than present systems as well as an increased energy range (20 GeV to 300 TeV). For the high energy portion of this range, a relatively large area has to be covered by the array. For this, the construction of ~7 m diameter Cherenkov telescopes is an option under study. We have proposed an innovative design of a Davies-Cotton mount for such a telescope, within Cherenkov Telescope Array specifications, and evaluated its mechanical and optical performance. The mount is a reticulated-type structure with steel tubes and tensioned wires, designed in three main parts to be assembled on site. In this work we show the structural characteristics of the mount and the optical aberrations at the focal plane for three options of mirror facet size caused by mount deformations due to wind and gravity.

We report on the development of new code to support the beam waveguide antenna mount types in AIPS, which will allow polarisation analysis of observations made using these antennas. Beam Wave-guide antennas in VLBI are common in communication antennas that have been repurposed (e.g. Warkworth, Yamaguchi). The mount type affects the differential phase between the left and the right hand circular polarisations (LHC and RHC) for different points on the sky. We demonstrate that the corrections for the Warkworth beam wave guide antenna can be applied.

One of the main pursuits of the MagAO-X project is imaging planets around nearby stars with the direct detection method utilizing an extreme AO system and a coronagraph and a large telescope. The MagAO-X astronomical coronagraph will be implemented on the 6.5 meter Clay Magellan Telescope in Chile. The 22 mirrors in the system require a high level of mirror stability. Our goal is less than 1 microradian drift in tilt per mirror per one degree Celsius change in temperature. There are no commercial 2inch kinematic optical mounts that are truly "zero-drift" from 0-20C. Our solution to this problem was to develop a locking clamp to keep our optics stable and fulfill our specifications. After performing temperature variation and thermal shock testing, we conclude that this novel locking clamp significantly increases the thermal stability of stainless steel mounts by ~10x but still allows accurate microradian positioning of a mirror. A provisional patent (#62/632,544) has been obtained for this mount.