共找到 20 条结果
High-mobility communications, which are crucial for next-generation wireless systems, cause the orthogonal frequency division multiplexing (OFDM) waveform to suffer from strong intercarrier interference (ICI) due to the Doppler effect. In this work, we propose a novel receiver architecture for OFDM that leverages the angular domain to separate multipaths. A block-type pilot is sent to estimate direction-of-arrivals (DoAs), propagation delays, and channel gains of the multipaths. Subsequently, a decision-directed (DD) approach is employed to estimate and iteratively refine the Dopplers. Two different approaches are investigated to provide initial Doppler estimates: an error vector magnitude (EVM)-based method and a deep learning (DL)-based method. Simulation results reveal that the DL-based approach allows for constant bit error rate (BER) performance up to the maximum 6G speed of 1000 km/h.
Terahertz communications are envisioned as a key enabler for 6G networks. The abundant spectrum available in such ultra high frequencies has the potential to increase network capacity to huge data rates. However, they are extremely affected by blockages, to the point of disrupting ongoing communications. In this paper, we elaborate on the relevance of predicting visibility between users and access points (APs) to improve the performance of THz-based networks by minimizing blockages, that is, maximizing network availability, while at the same time keeping a low reconfiguration overhead. We propose a novel approach to address this problem, by combining a neural network (NN) for predicting future user-AP visibility probability, with a probability threshold for AP reselection to avoid unnecessary reconfigurations. Our experimental results demonstrate that current state-of-the-art handover mechanisms based on received signal strength are not adequate for THz communications, since they are ill-suited to handle hard blockages. Our proposed NN-based solution significantly outperforms them, demonstrating the interest of our strategy as a research line.
Symbiotic radio (SR), a novel energy- and spectrum-sharing paradigm of backscatter communications (BC), has been deemed a promising solution for ambient Internet of Things (A-IoT), enabling ultra-low power consumption and massive connectivity. However, A-IoT nodes utilizing BC suffer from low transmission rates, which may limit the applications of SR in A-IoT scenarios with data transmission requirements. To address this issue, in this article, we introduce hybrid active-passive communications (HAPC) into SR by exploiting tradeoffs between transmission rate and power consumption. We first present an overview of novel BC paradigms including ambient BC and SR. Then, a novel HAPC-enabled SR is proposed to enhance the transmission rate of A-IoT nodes. Furthermore, within this paradigm, we investigate the resource allocation scheme and present preliminary research results. Simulation results show that the transmission rate of A-IoT nodes in the proposed HAPC-enabled SR surpasses that in traditional SR. Finally, we discuss open issues related to HAPC-enabled SR.
This letter investigates channel estimation for ultra-massive multiple-input multiple-output (MIMO) communications. We propose a joint low-rank and sparse Bayesian estimation (LRSBE) algorithm for spatial non-stationary ultra-massive channels by exploiting the low-rankness and sparsity in the beam domain. Specifically, the channel estimation integrates sparse Bayesian learning and soft-threshold gradient descent within the expectation-maximization framework. Simulation results show that the proposed algorithm significantly outperforms the state-of-the-art alternatives under different signal-to-noise ratio conditions in terms of estimation accuracy and overall complexity.
This paper addresses the crucial need for reliable wireless communication in vehicular networks, particularly vital for the safety and efficacy of (semi-)autonomous driving amid increasing traffic. We explore the use of Reconfigurable Intelligent Surfaces (RISes) mounted on Drone Relay Stations (DRS) to enhance communication reliability. Our study formulates an optimization problem to pinpoint the optimal location and orientation of the DRS, thereby creating an additional propagation path for vehicle-to-everything (V2X) communications. We introduce a heuristic approach that combines trajectory optimization for DRS positioning and a Q-learning scheme for RIS orientation. Our results not only confirm the convergence of the Q-learning algorithm but also demonstrate significant communication improvements achieved by integrating a DRS into V2X networks.
Integrated communications and localization (ICAL) will play an important part in future sixth generation (6G) networks for the realization of Internet of Everything (IoE) to support both global communications and seamless localization. Massive multiple-input multiple-output (MIMO) low earth orbit (LEO) satellite systems have great potential in providing wide coverage with enhanced gains, and thus are strong candidates for realizing ubiquitous ICAL. In this paper, we develop a wideband massive MIMO LEO satellite system to simultaneously support wireless communications and localization operations in the downlink. In particular, we first characterize the signal propagation properties and derive a localization performance bound. Based on these analyses, we focus on the hybrid analog/digital precoding design to achieve high communication capability and localization precision. Numerical results demonstrate that the proposed ICAL scheme supports both the wireless communication and localization operations for typical system setups.
Integrated Sensing and Communication (ISAC) design is crucial for 6G and harmonizes environmental data sensing with communication, emphasizing the need to understand and model these elements. This paper delves into dual-channel models for ISAC, employing channel extraction techniques to validate and enhance accuracy. Focusing on millimeter wave (mmWave) radars, it explores the extraction of the bistatic sensing channel from monostatic measurements and subsequent communication channel estimation. The proposed methods involve interference extraction, module and phase correlation analyses, chirp clustering, and auto-clutter reduction. A comprehensive set-up in an anechoic chamber with controlled scenarios evaluates the proposed techniques, demonstrating successful channel extraction and validation through Root Mean Square Delay Spread (RMS DS), Power Delay Profile (PDP), and Angle of Arrival (AoA) analysis. Comparison with Ray-Tracing (RT) simulations confirms the effectiveness of the proposed approach, presenting an innovative stride towards fully integrated sensing and communication in future networks.
Semantic communication marks a new paradigm shift from bit-wise data transmission to semantic information delivery for the purpose of bandwidth reduction. To more effectively carry out specialized downstream tasks at the receiver end, it is crucial to define the most critical semantic message in the data based on the task or goal-oriented features. In this work, we propose a novel goal-oriented communication (GO-COM) framework, namely Goal-Oriented Semantic Variational Autoencoder (GOS-VAE), by focusing on the extraction of the semantics vital to the downstream tasks. Specifically, we adopt a Vector Quantized Variational Autoencoder (VQ-VAE) to compress media data at the transmitter side. Instead of targeting the pixel-wise image data reconstruction, we measure the quality-of-service at the receiver end based on a pre-defined task-incentivized model. Moreover, to capture the relevant semantic features in the data reconstruction, imitation learning is adopted to measure the data regeneration quality in terms of goal-oriented semantics. Our experimental results demonstrate the power of imitation learning in characterizing goal-oriented semantics and bandwidth efficiency of our propos
Prior to the era of artificial intelligence and big data, wireless communications primarily followed a conventional research route involving problem analysis, model building and calibration, algorithm design and tuning, and holistic and empirical verification. However, this methodology often encountered limitations when dealing with large-scale and complex problems and managing dynamic and massive data, resulting in inefficiencies and limited performance of traditional communication systems and methods. As such, wireless communications have embraced the revolutionary impact of artificial intelligence and machine learning, giving birth to more adaptive, efficient, and intelligent systems and algorithms. This technological shift opens a road to intelligent information transmission and processing. This overview article discusses the typical roles of machine learning in intelligent wireless communications, as well as its features, challenges, and practical considerations.
The use of synthetic data has emerged as an essential tool in Magnetic Resonance Spectroscopy (MRS) research and applications, providing advantages for optimization of acquisition, software validation, deep learning applications, and enhanced reproducibility. Importantly, synthetic data addresses challenges of limited training data availability, particularly for clinical populations, and offers controlled solutions for investigating uncertainties and unexplained variance with in vivo data. This work provides a review and evaluation of current practices in the use and generation of synthetic data within the MRS field. Conducted by the MRS Synthetic Data Working Group under the Code & Data Sharing Committee of the MRS Study Group of the International Society for Magnetic Resonance in Medicine (ISMRM), this manuscript encompasses existing literature, supplemented by collective experience and in-house methodologies.
We propose a low-power mobile low earth orbit (LEO) satellite communication architecture, employing double reconfigurable intelligent surfaces (RIS) to enhance energy efficiency and signal performance. With a distance between RISs that satisfies the far-field requirement, this architecture positions one small RIS each in the near-field of the satellite's antenna and the user on the ground. Moreover, we develop a path loss model for the double-RIS communication link, considering the near-field and far-field effects. Further, with the help of dual-stage beamforming, the proposed system maximizes the signal power and minimizes power consumption. Simulation results show that the proposed architecture can reduce the power consumption with 40 dB in the uplink, with a small $0.25^2$ $\text{m}^2$ RIS near the user, to communicate in energy-constrained LEO satellite communication circumstances.
This paper studies an extremely large-scale reconfigurable intelligent surface (XL-RIS) empowered covert communication system in the near-field region. Alice covertly transmits messages to Bob with the assistance of the XL-RIS, while evading detection by Willie. To enhance the covert communication performance, we maximize the achievable covert rate by jointly optimizing the hybrid analog and digital beamformers at Alice, as well as the reflection coefficient matrix at the XL-RIS. An alternating optimization algorithm is proposed to solve the joint beamforming design problem. For the hybrid beamformer design, a semi-closed-form solution for fully digital beamformer is first obtained by a weighted minimum mean-square error based algorithm, then the baseband digital and analog beamformers at Alice are designed by approximating the fully digital beamformer via manifold optimization. For the XL-RIS's reflection coefficient matrix design, a low-complexity alternating direction method of multipliers based algorithm is proposed to address the challenge of large-scale variables and unit-modulus constraints. Numerical results unveil that i) the near-field communications can achieve a higher
Reconfigurable intelligent surface (RIS) has become a promising technology to realize the programmable wireless environment via steering the incident signal in fully customizable ways. However, a major challenge in RIS-aided communication systems is the simultaneous design of the precoding matrix at the base station (BS) and the phase shifting matrix of the RIS elements. This is mainly attributed to the highly non-convex optimization space of variables at both the BS and the RIS, and the diversity of communication environments. Generally, traditional optimization methods for this problem suffer from the high complexity, while existing deep learning based methods are lack of robustness in various scenarios. To address these issues, we introduce a gradient-based manifold meta learning method (GMML), which works without pre-training and has strong robustness for RIS-aided communications. Specifically, the proposed method fuses meta learning and manifold learning to improve the overall spectral efficiency, and reduce the overhead of the high-dimensional signal process. Unlike traditional deep learning based methods which directly take channel state information as input, GMML feeds the
The rapid expansion of edge devices and Internet-of-Things (IoT) continues to heighten the demand for data transport under limited spectrum resources. The goal-oriented communications (GO-COM), unlike traditional communication systems designed for bit-level accuracy, prioritizes more critical information for specific application goals at the receiver. To improve the efficiency of generative learning models for GO-COM, this work introduces a novel noise-restricted diffusion-based GO-COM (Diff-GO$^\text{n}$) framework for reducing bandwidth overhead while preserving the media quality at the receiver. Specifically, we propose an innovative Noise-Restricted Forward Diffusion (NR-FD) framework to accelerate model training and reduce the computation burden for diffusion-based GO-COMs by leveraging a pre-sampled pseudo-random noise bank (NB). Moreover, we design an early stopping criterion for improving computational efficiency and convergence speed, allowing high-quality generation in fewer training steps. Our experimental results demonstrate superior perceptual quality of data transmission at a reduced bandwidth usage and lower computation, making Diff-GO$^\text{n}$ well-suited for real
Movable antenna (MA) is an emerging technology that utilizes localized antenna movement to achieve better channel conditions for enhancing communication performance. In this paper, we study the MA-enhanced multicast transmission from a base station equipped with multiple MAs to multiple groups of single-MA users. Our goal is to maximize the minimum weighted signal-to-interference-plus-noise ratio (SINR) among all the users by jointly optimizing the position of each transmit/receive MA and the transmit beamforming. To tackle this challenging problem, we first consider the single-group scenario and propose an efficient algorithm based on the techniques of alternating optimization and successive convex approximation. Particularly, when optimizing transmit or receive MA positions, we construct a concave lower bound for the signal-to-noise ratio (SNR) of each user using only the second-order Taylor expansion, which simplifies the problem-solving process compared to the existing two-step approximation method. The proposed design is then extended to the general multi-group scenario. Simulation results show that the proposed algorithm converges faster than the existing two-step approximati
In this work, we consider a backscatter communication system wherein multiple asynchronous sources (tags) exploit the reverberation generated by a nearby radar transmitter as an ambient carrier to deliver a message to a common destination (reader) through a number of available subchannels. We propose a new encoding strategy wherein each tag transmits both pilot and data symbols on each subchannel and repeats some of the data symbols on multiple subchannels. We then exploit this signal structure to derive two semi-blind iterative algorithms for joint estimation of the data symbols and the subchannel responses that are also able to handle some missing measurements. The proposed encoding/decoding strategies are scalable with the number of tags and their payload and can achieve different tradeoffs in terms of transmission and error rates. Some numerical examples are provided to illustrate the merits of the proposed solutions.
Magnetic Induction (MI) communication can be applied in some through-the-earth scenarios such as mines and underground rivers. To increase the transmission rate of MI communications, we propose a cooperative MI (CMI) scheme with an amplify-and-forward (AF) relay. Different from existing studies, we mainly focus on the relay with arbitrary antenna position and orientation (antenna deployment, AD). We derive the closed-form expression of CMI achievable data rate gain (CMG) for the relay and the closed-form expression of CMI channel bandwidth. Simulations reveal that a relay with appropriate AD could yield a significant increase in the achievable rate for MI systems.
Deriving stellar atmospheric parameters and chemical abundances from stellar spectra is crucial for understanding the evolution of the Milky Way. By performing a fitting with MARCS model atmospheric theoretical synthetic spectra combined with a domain-adaptation method, we estimate the fundamental stellar parameters (Teff, log g, [Fe/H], vmic, and vmac) and 11 chemical abundances for 1.38 million FGKM-type stars of the Medium-Resolution Spectroscopic Survey (MRS) from LAMOST-II DR8. The domain-adaptation method, Cycle-StarNet, is employed to reduce the gap between observed and synthetic spectra, and the L-BFGS algorithm is used to search for the best-fit synthetic spectra. By combining the 2MASS photometric survey data, Gaia EDR3 parallax, and MIST isochrones, the surface gravities of the stars are constrained after estimating their bolometric luminosities. The accuracy of Teff, log g, and [Fe/H] can reach 150 K, 0.11 dex, and 0.15 dex, evaluated by the PASTEL catalog, asteroseismic samples, and other spectroscopic surveys. The precision of these parameters and elemental abundances ([C/Fe], [Na/Fe], [Mg/Fe], [Si/Fe], [Ca/Fe], [Ti/Fe], [Cr/Fe], [Mn/Fe], [Co/Fe], [Ni/Fe], and [Cu/Fe]
Semantic communications have shown its great potential to improve the transmission reliability, especially in the low signal-to-noise regime. However, resource allocation for semantic communications still remains unexplored, which is a critical issue in guaranteeing the semantic transmission reliability and the communication efficiency. To fill this gap, we investigate the spectral efficiency in the semantic domain and rethink the semantic-aware resource allocation issue. Specifically, taking text semantic communication as an example, the semantic spectral efficiency (S-SE) is defined for the first time, and is used to optimize resource allocation in terms of channel assignment and the number of transmitted semantic symbols. Additionally, for fair comparison of semantic and conventional communication systems, a transform method is developed to convert the conventional bit-based spectral efficiency to the S-SE. Simulation results demonstrate the validity and feasibility of the proposed resource allocation method, as well as the superiority of semantic communications in terms of the S-SE.
The space-air-ground-sea integrated network (SAGSIN) plays an important role in offering global coverage. To improve the efficient utilization of spectral and hardware resources in the SAGSIN, integrated sensing and communications (ISAC) has drawn extensive attention. Most existing ISAC works focus on terrestrial networks and can not be straightforwardly applied in satellite systems due to the significantly different electromagnetic wave propagation properties. In this work, we investigate the application of ISAC in massive multiple-input multiple-output (MIMO) low earth orbit (LEO) satellite systems. We first characterize the statistical wave propagation properties by considering beam squint effects. Based on this analysis, we propose a beam squint-aware ISAC technique for hybrid analog/digital massive MIMO LEO satellite systems exploiting statistical channel state information. Simulation results demonstrate that the proposed scheme can operate both the wireless communications and the target sensing simultaneously with satisfactory performance, and the beam-squint effects can be efficiently mitigated with the proposed method in typical LEO satellite systems.