搜索结果：Journal of intelligent manufacturing

Intelligent manufacturing is a new model that uses advanced technologies such as the Internet of Things, big data, and artificial intelligence to improve the efficiency and quality of manufacturing production. As an important support to promote the transformation and upgrading of the manufacturing industry, cloud service optimization has received the attention of researchers. In recent years, remarkable research results have been achieved in this field. For the sustainability of intelligent manufacturing platforms, in this paper we summarize the process of cloud service optimization for intelligent manufacturing. Further, to address the problems of dispersed optimization indicators and nonuniform/unstandardized definitions in the existing research, 11 optimization indicators that take into account three-party participant subjects are defined from the urgent requirements of the sustainable development of intelligent manufacturing platforms. Next, service optimization algorithms are classified into two categories, heuristic and reinforcement learning. After comparing the two categories, the current key techniques of service optimization are targeted. Finally, research hotspots and fu

Rankings of scholarly journals based on citation data are often met with skepticism by the scientific community. Part of the skepticism is due to disparity between the common perception of journals' prestige and their ranking based on citation counts. A more serious concern is the inappropriate use of journal rankings to evaluate the scientific influence of authors. This paper focuses on analysis of the table of cross-citations among a selection of Statistics journals. Data are collected from the Web of Science database published by Thomson Reuters. Our results suggest that modelling the exchange of citations between journals is useful to highlight the most prestigious journals, but also that journal citation data are characterized by considerable heterogeneity, which needs to be properly summarized. Inferential conclusions require care in order to avoid potential over-interpretation of insignificant differences between journal ratings. Comparison with published ratings of institutions from the UK's Research Assessment Exercise shows strong correlation at aggregate level between assessed research quality and journal citation `export scores' within the discipline of Statistics.

We compare the network of aggregated journal-journal citation relations provided by the Journal Citation Reports (JCR) 2012 of the Science and Social Science Citation Indexes (SCI and SSCI) with similar data based on Scopus 2012. First, global maps were developed for the two sets separately; sets of documents can then be compared using overlays to both maps. Using fuzzy-string matching and ISSN numbers, we were able to match 10,524 journal names between the two sets; that is, 96.4% of the 10,936 journals contained in JCR or 51.2% of the 20,554 journals covered by Scopus. Network analysis was then pursued on the set of journals shared between the two databases and the two sets of unique journals. Citations among the shared journals are more comprehensively covered in JCR than Scopus, so the network in JCR is denser and more connected than in Scopus. The ranking of shared journals in terms of indegree (that is, numbers of citing journals) or total citations is similar in both databases overall (Spearman's \r{ho} > 0.97), but some individual journals rank very differently. Journals that are unique to Scopus seem to be less important--they are citing shared journals rather than bein

Atomic precision advanced manufacturing (APAM) dopes silicon with enough carriers to change its electronic structure and can be used to create novel devices by defining metallic regions whose boundaries have single-atom abruptness. Incompatibility with the thermal and lithography process requirements for gated silicon transistor manufacturing have inhibited exploration of both how APAM can enhance CMOS performance and how transistor manufacturing steps can accelerate the discovery of new APAM device concepts. In this work, we introduce an APAM process that enables direct integration into the middle of a transistor manufacturing workflow. We show that a process that combines sputtering and annealing with a hardmask preserves a defining characteristic of APAM, a doping density far in excess of the solid solubility limit, while trading another, the atomic precision, for compatibility with manufacturing. The electrical characteristics of a chip combining a transistor with an APAM resistor show that the APAM module has only affected the transistor through the addition of a resistance and not by altering the transistor. This proof-of-concept demonstration also outlines the requirements a

Intelligent escape is an interdisciplinary field that employs artificial intelligence (AI) techniques to enable robots with the capacity to intelligently react to potential dangers in dynamic, intricate, and unpredictable scenarios. As the emphasis on safety becomes increasingly paramount and advancements in robotic technologies continue to advance, a wide range of intelligent escape methodologies has been developed in recent years. This paper presents a comprehensive survey of state-of-the-art research work on intelligent escape of robotic systems. Four main methods of intelligent escape are reviewed, including planning-based methodologies, partitioning-based methodologies, learning-based methodologies, and bio-inspired methodologies. The strengths and limitations of existing methods are summarized. In addition, potential applications of intelligent escape are discussed in various domains, such as search and rescue, evacuation, military security, and healthcare. In an effort to develop new approaches to intelligent escape, this survey identifies current research challenges and provides insights into future research trends in intelligent escape.

Manufacturing is gathering extensive amounts of diverse data, thanks to the growing number of sensors and rapid advances in sensing technologies. Among the various data types available in SMS settings, time-series data plays a pivotal role. Hence, TSC emerges is crucial in this domain. The objective of this study is to fill this gap by providing a rigorous experimental evaluation of the SoTA ML and DL algorithms for TSC tasks in manufacturing and industrial settings. We first explored and compiled a comprehensive list of more than 92 SoTA algorithms from both TSC and manufacturing literature. Following, we selected the 36 most representative algorithms from this list. To evaluate their performance across various manufacturing classification tasks, we curated a set of 22 manufacturing datasets, representative of different characteristics that cover diverse manufacturing problems. Subsequently, we implemented and evaluated the algorithms on the manufacturing benchmark datasets, and analyzed the results for each dataset. Based on the results, ResNet, DrCIF, InceptionTime, and ARSENAL are the top-performing algorithms, boasting an average accuracy of over 96.6% across all 22 manufactur

Using the Scopus dataset (1996-2007) a grand matrix of aggregated journal-journal citations was constructed. This matrix can be compared in terms of the network structures with the matrix contained in the Journal Citation Reports (JCR) of the Institute of Scientific Information (ISI). Since the Scopus database contains a larger number of journals and covers also the humanities, one would expect richer maps. However, the matrix is in this case sparser than in the case of the ISI data. This is due to (i) the larger number of journals covered by Scopus and (ii) the historical record of citations older than ten years contained in the ISI database. When the data is highly structured, as in the case of large journals, the maps are comparable, although one may have to vary a threshold (because of the differences in densities). In the case of interdisciplinary journals and journals in the social sciences and humanities, the new database does not add a lot to what is possible with the ISI databases.

Although the applications of artificial intelligence especially deep learning had greatly improved various aspects of intelligent manufacturing, they still face challenges for wide employment due to the poor generalization ability, difficulties to establish high-quality training datasets, and unsatisfactory performance of deep learning methods. The emergence of large scale foundational models(LSFMs) had triggered a wave in the field of artificial intelligence, shifting deep learning models from single-task, single-modal, limited data patterns to a paradigm encompassing diverse tasks, multimodal, and pre-training on massive datasets. Although LSFMs had demonstrated powerful generalization capabilities, automatic high-quality training dataset generation and superior performance across various domains, applications of LSFMs on intelligent manufacturing were still in their nascent stage. A systematic overview of this topic was lacking, especially regarding which challenges of deep learning can be addressed by LSFMs and how these challenges can be systematically tackled. To fill this gap, this paper systematically expounded current statue of LSFMs and their advantages in the context of

A number of journal classification systems have been developed in bibliometrics since the launch of the Citation Indices by the Institute of Scientific Information (ISI) in the 1960s. These systems are used to normalize citation counts with respect to field-specific citation patterns. The best known system is the so-called "Web-of-Science Subject Categories" (WCs). In other systems papers are classified by algorithmic solutions. Using the Journal Citation Reports 2014 of the Science Citation Index and the Social Science Citation Index (n of journals = 11,149), we examine options for developing a new system based on journal classifications into subject categories using aggregated journal-journal citation data. Combining routines in VOSviewer and Pajek, a tree-like classification is developed. At each level one can generate a map of science for all the journals subsumed under a category. Nine major fields are distinguished at the top level. Further decomposition of the social sciences is pursued for the sake of example with a focus on journals in information science (LIS) and science studies (STS). The new classification system improves on alternative options by avoiding the problem

Using three years of the Journal Citation Reports (2011, 2012, and 2013), indicators of transitions in 2012 (between 2011 and 2013) are studied using methodologies based on entropy statistics. Changes can be indicated at the level of journals using the margin totals of entropy production along the row or column vectors, but also at the level of links among journals by importing the transition matrices into network analysis and visualization programs (and using community-finding algorithms). Seventy-four journals are flagged in terms of discontinuous changes in their citations; but 3,114 journals are involved in "hot" links. Most of these links are embedded in a main component; 78 clusters (containing 172 journals) are flagged as potential "hot spots" emerging at the network level. An additional finding is that PLoS ONE introduced a new communication dynamics into the database. The limitations of the methodology are elaborated using an example. The results of the study indicate where developments in the citation dynamics can be considered as significantly unexpected. This can be used as heuristic information; but what a "hot spot" in terms of the entropy statistics of aggregated cit

Metals and alloys fabricated by fusion-based additive manufacturing (AM), or 3D printing, undergo complex dynamics of melting and solidification, presenting challenges to the effective control of grain structure. Herein, we report on the use of high-intensity ultrasound that controls the process of solidification during AM of 316L stainless steel. We find that the use of ultrasound favours the columnar-to-equiaxed transition, promoting the formation of fine equiaxed grains with random crystallographic texture. Moreover, the use of ultrasound increases the number density of grains from 305 mm-2 to 2748 mm-2 despite an associated decrease in cooling rate and temperature gradient in the melt pool during AM. Our assessment of the relationship between grain size and cooling rate indicates that the formation of crystallites during AM is enhanced by ultrasound. Furthermore, the use of ultrasound increases the amount of constitutional supercooling during solidification by lowering the temperature gradient in the bulk of the melt pool, thus creating an environment that favours nucleation, growth, and survival of grains. This new understanding provides opportunities to better exploit ultraso

Quality control is an essential process in manufacturing to make the product defect-free as well as to meet customer needs. The automation of this process is important to maintain high quality along with the high manufacturing throughput. With recent developments in deep learning and computer vision technologies, it has become possible to detect various features from the images with near-human accuracy. However, many of these approaches are data intensive. Training and deployment of such a system on manufacturing floors may become expensive and time-consuming. The need for large amounts of training data is one of the limitations of the applicability of these approaches in real-world manufacturing systems. In this work, we propose the application of a Siamese convolutional neural network to do one-shot recognition for such a task. Our results demonstrate how one-shot learning can be used in quality control of steel by identification of defects on the steel surface. This method can significantly reduce the requirements of training data and can also be run in real-time.

As customer demand for multi-variety and small-batch production increases, dynamic disturbances place greater demands on manufacturing systems. To address such challenges, researchers proposed the multi-agent manufacturing system. However, conventional agent negotiation typically relies on pre-defined and fixed heuristic rules, which are ill-suited to managing complex and fluctuating disturbances. In current implementations, mainstream approaches based on reinforcement learning require the development of simulators and training models specific to a given shopfloor, necessitating substantial computational resources and lacking scalability. To overcome this limitation, the present study proposes a Large Language Model-based (LLM-based) multi-agent manufacturing system for intelligent shopfloor management. By defining the diverse modules of agents and their collaborative methods, this system facilitates the processing of all workpieces with minimal human intervention. The agents in this system consist of the Machine Server Module (MSM), Bid Inviter Module (BIM), Bidder Module (BM), Thinking Module (TM), and Decision Module (DM). By harnessing the reasoning capabilities of LLMs, these

The use of robotic technology has drastically increased in manufacturing in the 21st century. But by utilizing their sensory cues, humans still outperform machines, especially in the micro scale manufacturing, which requires high-precision robot manipulators. These sensory cues naturally compensate for high level of uncertainties that exist in the manufacturing environment. Uncertainties in performing manufacturing tasks may come from measurement noise, model inaccuracy, joint compliance (e.g., elasticity) etc. Although advanced metrology sensors and high-precision microprocessors, which are utilized in nowadays robots, have compensated for many structural and dynamic errors in robot positioning, but a well-designed control algorithm still works as a comparable and cheaper alternative to reduce uncertainties in automated manufacturing. Our work illustrates that a multi-robot control system can reduce various uncertainties to a great amount.

Advancements in chip design and manufacturing have enabled the processing of complex tasks such as deep learning and natural language processing, paving the way for the development of artificial general intelligence (AGI). AI, on the other hand, can be leveraged to innovate and streamline semiconductor technology from planning and implementation to manufacturing. In this paper, we present \textit{Intelligent OPC Engineer Assistant}, an AI/LLM-powered methodology designed to solve the core manufacturing-aware optimization problem known as optical proximity correction (OPC). The methodology involves a reinforcement learning-based OPC recipe search and a customized multi-modal agent system for recipe summarization. Experiments demonstrate that our methodology can efficiently build OPC recipes on various chip designs with specially handled design topologies, a task that typically requires the full-time effort of OPC engineers with years of experience.

Metal additive manufacturing enables the fabrication of complex parts, but achieving consistent build quality remains challenging due to interactions induced by repeated layer-wise melting, solidification, and reheating across the 3D build. Advanced sensing provide a great opportunity to collect rich observations of the actual manufacturing process for real-time quality monitoring and control. Yet, existing methods often have limited ability to represent multi-layer interactions and quantify their contributions to quality. In this paper, we develop a novel spatiotemporal graph transformer for modeling 3D neighborhood interactions and learn their effects on build quality in metal additive manufacturing. Specifically, we first introduce a weighted network representation of the manufacturing process, where fusing locations are modeled as nodes, and their spatial- and process-dependent relationships are encoded as edge weights. This representation also enables the integration of multimodal data (e.g., geometric design, process settings, and in-situ sensing data) into a unified structure for downstream learning tasks. Building on this network, we further design a dual-attention graph tr

This paper presents a topological analytics approach within the 5-level Cyber-Physical Systems (CPS) architecture for the Stream-of-Quality assessment in smart manufacturing. The proposed methodology not only enables real-time quality monitoring and predictive analytics but also discovers the hidden relationships between quality features and process parameters across different manufacturing processes. A case study in additive manufacturing was used to demonstrate the feasibility of the proposed methodology to maintain high product quality and adapt to product quality variations. This paper demonstrates how topological graph visualization can be effectively used for the real-time identification of new representative data through the Stream-of-Quality assessment.

The benefits of adopting artificial intelligence (AI) in manufacturing are undeniable. However, operationalizing AI beyond the prototype, especially when involved with cyber-physical production systems (CPPS), remains a significant challenge due to the technical system complexity, a lack of implementation standards and fragmented organizational processes. To this end, this paper proposes a new process model for the lifecycle management of AI assets designed to address challenges in manufacturing and facilitate effective operationalization throughout the entire AI lifecycle. The process model, as a theoretical contribution, builds on machine learning operations (MLOps) principles and refines three aspects to address the domain-specific requirements from the CPPS context. As a result, the proposed process model aims to support organizations in practice to systematically develop, deploy and manage AI assets across their full lifecycle while aligning with CPPS-specific constraints and regulatory demands.

Topological Data Analysis (TDA) is a discipline that applies algebraic topology techniques to analyze complex, multi-dimensional data. Although it is a relatively new field, TDA has been widely and successfully applied across various domains, such as medicine, materials science, and biology. This survey provides an overview of the state of the art of TDA within a dynamic and promising application area: industrial manufacturing and production, particularly within the Industry 4.0 context. We have conducted a rigorous and reproducible literature search focusing on TDA applications in industrial production and manufacturing settings. The identified works are categorized based on their application areas within the manufacturing process and the types of input data. We highlight the principal advantages of TDA tools in this context, address the challenges encountered and the future potential of the field. Furthermore, we identify TDA methods that are currently underexploited in specific industrial areas and discuss how their application could be beneficial, with the aim of stimulating further research in this field. This work seeks to bridge the theoretical advancements in TDA with the p

Using "Analyze Results" at the Web of Science, one can directly generate overlays onto global journal maps of science. The maps are based on the 10,000+ journals contained in the Journal Citation Reports (JCR) of the Science and Social Science Citation Indices (2011). The disciplinary diversity of the retrieval is measured in terms of Rao-Stirling's "quadratic entropy." Since this indicator of interdisciplinarity is normalized between zero and one, the interdisciplinarity can be compared among document sets and across years, cited or citing. The colors used for the overlays are based on Blondel et al.'s (2008) community-finding algorithms operating on the relations journals included in JCRs. The results can be exported from VOSViewer with different options such as proportional labels, heat maps, or cluster density maps. The maps can also be web-started and/or animated (e.g., using PowerPoint). The "citing" dimension of the aggregated journal-journal citation matrix was found to provide a more comprehensive description than the matrix based on the cited archive. The relations between local and global maps and their different functions in studying the sciences in terms of journal lit