This work summarizes the design, construction, initial performance evaluation and pilot clinical results of the IMAS system, a long axial field of view (FOV), also known as total-body (TB-), positron emission tomography (PET) prototype scanner. This PET enables for the first time in TB-PET imaging, simultaneously time-of-flight (TOF) and depth-of-interaction (DOI) capabilities. The IMAS detector block is based on LYSO semi monolithic scintillators, with individual slab sizes of 3 mm x 25 mm x 20 mm each. Arrays of 1x8 slabs are coupled to 8x8 Silicon Photomultiplier arrays. A proprietary readout reduces the 64 signals to only 16 outputs, preserving both 3D photon impact positioning and timing accuracy. IMAS has a total of 30,720 channels. PETsys electronics is used for data acquisition. The IMAS geometry is based on 5 rings of 10 cm each, with a 5 cm gap between them. It defines an axial FOV of 71 cm with a bore aperture of 82 cm. We report in this work the pilot tests of the system performance and the first clinical results. We found that the system spatial resolution remained below 4 mm across the entire FOV, even at the off-radial position of 30 cm. A coincidence time resolution
Binge eating disorder (BED) is the most prevalent eating disorder. However, current diagnostic frameworks remain largely grounded in symptom-based criteria rather than underlying biological mechanisms, thereby limiting early detection and the development of biologically-informed interventions. Emerging studies have begun to investigate the neurobiological signatures of BED, yet their findings are often difficult to generalize due to the reliance on hypothesis-driven parametric models, single-modality analyses, and limited data diversity. Therefore, there is a critical need for advanced data-driven frameworks capable of modeling multimodal data to uncover generalizable and biologically meaningful signatures of BED. In this study, we propose the Interpretable Modality-Aware Mixture-of-Experts (IMA-MoE), a novel architecture designed to integrate heterogeneous neuroimaging, behavioral, hormonal, and demographic measures within a unified predictive framework. By encoding each measure as a distinct token, IMA-MoE enables flexible modeling of cross-modal dependencies while preserving modality-specific characteristics. We further introduce a token-importance mechanism to enhance interpret
This paper introduces the Interactive Memory Archive (IMA), a conceptual framework for AI-mediated reminiscence designed to support cognitive en-gagement among older adults experiencing memory loss. IMA integrates multimodal sensing, natural language conversational scaffolding, and cloud-based archiving within the familiar form of a large format historical picture book. The model theorizes reminiscence as a guided, context-aware interaction eliciting autobiographical memories and preserving them as cul-tural artifacts. The paper positions IMA as a theoretical contribution, articu-lates testable propositions, and outlines a research agenda for future empiri-cal, technical, and ethical inquiry.
Interactive multimodal applications (IMAs), such as route planning in the Internet of Vehicles, enrich users' personalized experiences by integrating various forms of data over wireless networks. Recent advances in large language models (LLMs) utilize mixture-of-experts (MoE) mechanisms to empower multiple IMAs, with each LLM trained individually for a specific task that presents different business workflows. In contrast to existing approaches that rely on multiple LLMs for IMAs, this paper presents a novel paradigm that accomplishes various IMAs using a single compositional LLM over wireless networks. The two primary challenges include 1) guiding a single LLM to adapt to diverse IMA objectives and 2) ensuring the flexibility and efficiency of the LLM in resource-constrained mobile environments. To tackle the first challenge, we propose ContextLoRA, a novel method that guides an LLM to learn the rich structured context among IMAs by constructing a task dependency graph. We partition the learnable parameter matrix of neural layers for each IMA to facilitate LLM composition. Then, we develop a step-by-step fine-tuning procedure guided by task relations, including training, freezing,
When the Orthogonal Chebyshev Sliding Technique was introduced it was applied to a portfolio of swaps and swaptions within the context of the FRTB-IMA capital calculation. The computational cost associated to the computation of the ES values - an essential component of the capital caluclation under FRTB-IMA - was reduced by more than $90\%$ while passing PLA tests. This paper extends the use of the Orthogonal Chebyshev Sliding Technique to portfolios of equity autocallables defined over a range of spot underlyings. Results are very positive as computational reductions are of about $90\%$ with passing PLA metrics. Since equity autocallables are a commonly traded exotic trade type, with significant FRTB-IMA computational costs, the extension presented in this paper constitutes an imporant step forward in tackling the computational challenges associated to an efficient FRTB-IMA implementation.
We study the problem of jointly selecting sensing agents and synthesizing decentralized active perception policies for the chosen subset of agents within a Decentralized Partially Observable Markov Decision Process (Dec-POMDP) framework. Our approach employs a two-layer optimization structure. In the inner layer, we introduce information-theoretic metrics, defined by the mutual information between the unknown trajectories or some hidden property in the environment and the collective partial observations in the multi-agent system, as a unified objective for active perception problems. We employ various optimization methods to obtain optimal sensor policies that maximize mutual information for distinct active perception tasks. In the outer layer, we prove that under certain conditions, the information-theoretic objectives are monotone and submodular with respect to the subset of observations collected from multiple agents. We then exploit this property to design an IMAS$^2$ (Information-theoretic Multi-Agent Selection and Sensing) algorithm for joint sensing agent selection and sensing policy synthesis. However, since the policy search space is infinite, we adapt the classical Nemhau
Cone-beam computed tomography (CBCT) offers advantages over conventional fan-beam CT in that it requires a shorter time and less exposure to obtain images. CBCT has found a wide variety of applications in patient positioning for image-guided radiation therapy, extracting radiomic information for designing patient-specific treatment, and computing fractional dose distributions for adaptive radiation therapy. However, CBCT images suffer from low soft-tissue contrast, noise, and artifacts compared to conventional fan-beam CT images. Therefore, it is essential to improve the image quality of CBCT. In this paper, we propose a synthetic approach to translate CBCT images with deep neural networks. Our method requires only unpaired and unaligned CBCT images and planning fan-beam CT (PlanCT) images for training. Once trained, 3D reconstructed CBCT images can be directly translated to high-quality PlanCT-like images. We demonstrate the effectiveness of our method with images obtained from 24 prostate patients, and we provide a statistical and visual comparison. The image quality of the translated images shows substantial improvement in voxel values, spatial uniformity, and artifact suppressi
In this work, we introduce a spatial branching process to model the growth of the mycelial network of a filamentous fungus. In this model, each filament is described by the position of its tip, the trajectory of which is solution to a stochastic differential equation with a drift term which depends on all the other trajectories. Each filament can branch either at its tip or along its length, that is to say at some past position of its tip, at some time- and space-dependent rates. It can stop growing at some rate which also depends on the positions of the other tips. We first construct the measure-valued process corresponding to this dynamics, then we study its large population limit and we characterise the limiting process as the weak solution to a system of partial differential equations.
In this paper, we propose IMA-GNN as an In-Memory Accelerator for centralized and decentralized Graph Neural Network inference, explore its potential in both settings and provide a guideline for the community targeting flexible and efficient edge computation. Leveraging IMA-GNN, we first model the computation and communication latencies of edge devices. We then present practical case studies on GNN-based taxi demand and supply prediction and also adopt four large graph datasets to quantitatively compare and analyze centralized and decentralized settings. Our cross-layer simulation results demonstrate that on average, IMA-GNN in the centralized setting can obtain ~790x communication speed-up compared to the decentralized GNN setting. However, the decentralized setting performs computation ~1400x faster while reducing the power consumption per device. This further underlines the need for a hybrid semi-decentralized GNN approach.
We develop eigenvalue bounds for symmetric, block tridiagonal multiple saddle-point linear systems, preconditioned with block diagonal matrices. We extend known results for $3 \times 3$ block systems [Bradley and Greif, IMA J.\ Numer. Anal. 43 (2023)] and for $4 \times 4$ systems [Pearson and Potschka, IMA J. Numer. Anal. 44 (2024)] to an arbitrary number of blocks. Moreover, our results generalize the bounds in [Sogn and Zulehner, IMA J. Numer. Anal. 39 (2018)], developed for an arbitrary number of blocks with null diagonal blocks. Extension to the bounds when the Schur complements are approximated is also provided, using perturbation arguments. Practical bounds are also obtained for the double saddle-point linear system. Numerical experiments validate our findings.
JOREK is being adapted to work with the Integrated Modelling & Analysis Suite (IMAS) which is being actively developed and used by the ITER Organization, the EUROfusion community and other ITER Members. The list of codes adapted to use the IMAS Data Model is gradually increasing with examples including SOLPS-ITER and JINTRAC. The main goal of the integration of JOREK with IMAS is to enable interaction with the plasma scenarios stored in the IMAS databases in the form of Interface Data Structures (IDSs): input conditions can be read from the databases and nonlinear plasma states determined by JOREK stored. IDSs provide a uniform way of representing data within the IMAS framework and allow to transfer data between codes and to storage within larger integrated modelling workflows. In order to integrate JOREK within IMAS it is therefore necessary that transformation tools are developed to facilitate the reading and writing of the relevant IDSs, including the MHD IDS, with its underlying Generalized Grid Description (GGD). For this purpose, utilities have been developed that extract JOREK simulation plasma state, namely the grid geometry and computed physical quantities for each tim
Motivated by comparing the convergence behavior of Gegenbauer projections and best approximations, we study the optimal rate of convergence for Gegenbauer projections in the maximum norm. We show that the rate of convergence of Gegenbauer projections is the same as that of best approximations under conditions of the underlying function is either analytic on and within an ellipse and $λ\leq0$ or differentiable and $λ\leq1$, where $λ$ is the parameter in Gegenbauer projections. If the underlying function is analytic and $λ>0$ or differentiable and $λ>1$, then the rate of convergence of Gegenbauer projections is slower than that of best approximations by factors of $n^λ$ and $n^{λ-1}$, respectively. An exceptional case is functions with endpoint singularities, for which Gegenbauer projections and best approximations converge at the same rate for all $λ>-1/2$. For functions with interior or endpoint singularities, we provide a theoretical explanation for the error localization phenomenon of Gegenbauer projections and for why the accuracy of Gegenbauer projections is better than that of best approximations except in small neighborhoods of the critical points. Our analysis provi
We consider finite element approximations for a one dimensional second order stochastic differential equation of boundary value type driven by a fractional Brownian motion with Hurst index $H\le 1/2$. We make use of a sequence of approximate solutions with the fractional noise replaced by its piecewise con- stant approximations to construct the finite element approximations for the equation. The error estimate of the approximations is derived through rigorous convergence analysis.
The confinement of energetic particles (EPs) generated by fusion reactions and external heating methods is crucial for the performance of future fusion devices. However, EP transport can occur due to their interaction with electromagnetic perturbations, affecting heating efficiency and overall performance. Robust reduced models are needed to analyze stability and transport, but their development requires effort. This paper presents an automated IMAS-based workflow for analyzing the time-dependent stability of EP-driven modes, focusing on the linear properties of Toroidal Alfven Eigenmodes (TAEs) in general Tokamak geometry. The workflow utilizes efficient computational methods and reduced models to deliver fast and reproducible results. A demonstration of the workflow's effectiveness was performed, identifying key linear properties of TAEs in various projected ITER scenarios. This approach represents a critical step towards developing tools for analyzing EP transport and optimizing the performance of future fusion reactors.
Since the onset of COVID-19, rural communities worldwide have faced significant challenges in accessing healthcare due to the migration of experienced medical professionals to urban centers. Semi-trained caregivers, such as Community Health Workers (CHWs) and Registered Medical Practitioners (RMPs), have stepped in to fill this gap, but often lack formal training. This paper proposes an advanced agentic medical assistant system designed to improve healthcare delivery in rural areas by utilizing Large Language Models (LLMs) and agentic approaches. The system is composed of five crucial components: translation, medical complexity assessment, expert network integration, final medical advice generation, and response simplification. Our innovative framework ensures context-sensitive, adaptive, and reliable medical assistance, capable of clinical triaging, diagnostics, and identifying cases requiring specialist intervention. The system is designed to handle cultural nuances and varying literacy levels, providing clear and actionable medical advice in local languages. Evaluation results using the MedQA, PubMedQA, and JAMA datasets demonstrate that this integrated approach significantly en
Independent Mechanism Analysis (IMA) seeks to address non-identifiability in nonlinear Independent Component Analysis (ICA) by assuming that the Jacobian of the mixing function has orthogonal columns. As typical in ICA, previous work focused on the case with an equal number of latent components and observed mixtures. Here, we extend IMA to settings with a larger number of mixtures that reside on a manifold embedded in a higher-dimensional than the latent space -- in line with the manifold hypothesis in representation learning. For this setting, we show that IMA still circumvents several non-identifiability issues, suggesting that it can also be a beneficial principle for higher-dimensional observations when the manifold hypothesis holds. Further, we prove that the IMA principle is approximately satisfied with high probability (increasing with the number of observed mixtures) when the directions along which the latent components influence the observations are chosen independently at random. This provides a new and rigorous statistical interpretation of IMA.
Image-generative artificial intelligence (AI) has garnered significant attention in recent years. In particular, the diffusion model, a core component of generative AI, produces high-quality images with rich diversity. In this study, we proposed a novel computed tomography (CT) reconstruction method by combining the denoising diffusion probabilistic model with iterative CT reconstruction. In sharp contrast to previous studies, we optimized the fidelity loss of CT reconstruction with respect to the latent variable of the diffusion model, instead of the image and model parameters. To suppress the changes in anatomical structures produced by the diffusion model, we shallowed the diffusion and reverse processes and fixed a set of added noises in the reverse process to make it deterministic during the inference. We demonstrated the effectiveness of the proposed method through the sparse-projection CT reconstruction of 1/10 projection data. Despite the simplicity of the implementation, the proposed method has the potential to reconstruct high-quality images while preserving the patient's anatomical structures and was found to outperform existing methods, including iterative reconstructio
We propose a simple mathematical model by applying Michaelis-Menton equations of enzyme kinetics to study the mutualistic interaction between the leaf cutter ant and its fungus garden at the early stage of colony expansion. We derive the sufficient conditions on the extinction and coexistence of these two species. In addition, we give a region of initial condition that leads to the extinction of two species when the model has an interior attractor. Our global analysis indicates that the division of labor by workers ants and initial conditions are two important {factors} that determine whether leaf cutter ants colonies and their fungus garden survive and grow can exist or not. We validate the model by doing the comparing between model simulations and data on fungal and ant colony growth rates under laboratory conditions. We perform sensitive analysis and parameter estimation of the model based on the experimental data to gain more biological insights on the ecological interactions between leaf cutter ants and their fungus garden. Finally, we give conclusions and {discuss} potential future {work}.
Deep neural networks (DNNs) are vulnerable to adversarial noises. Adversarial training is a general and effective strategy to improve DNN robustness (i.e., accuracy on noisy data) against adversarial noises. However, DNN models trained by the current existing adversarial training methods may have much lower standard accuracy (i.e., accuracy on clean data), compared to the same models trained by the standard method on clean data, and this phenomenon is known as the trade-off between accuracy and robustness and is considered unavoidable. This issue prevents adversarial training from being used in many application domains, such as medical image analysis, as practitioners do not want to sacrifice standard accuracy too much in exchange for adversarial robustness. Our objective is to lift (i.e., alleviate or even avoid) this trade-off between standard accuracy and adversarial robustness for medical image classification and segmentation. We propose a novel adversarial training method, named Increasing-Margin Adversarial (IMA) Training, which is supported by an equilibrium state analysis about the optimality of adversarial training samples. Our method aims to preserve accuracy while improv
The white-rot fungus, Physisporinus vitreus, degrades the membranes of bordered pits in tracheids and consequently increases the permeability of wood, which is a process that can be used by the wood industry to improve the uptake of wood preservatives and environmentally benign wood modification substances to enhance the use and sustainability of native conifer wood species. To understand and apply this process requires an understanding of how a complex system (fungus-wood) interacts under defined conditions. We present a three-dimensional fungal growth model (FGM) of the hyphal growth of P. vitreus in the heartwood of Norway spruce. The model considers hyphae and nutrients as discrete structures and links the microscopic interactions between fungus and wood (e.g. degradation rate and degree of opening of pits) with macroscopic system properties, such penetration depth of the fungus, biomass and distribution of destroyed pits in early- and latewood. Simulations were compared with experimental data. The growth of P. vitreus is characterized by a stepwise capture of the substrate and the effect of this on wood according to different model parameters is discussed.