搜索结果：Heated

We perform direct numerical simulations of natural convection in a differentially heated cavity over Rayleigh number $Ra=10^6$--$10^8$ at Prandtl number $Pr=0.7$, systematically varying the aspect ratio over $0.1 \leq Γ\leq 60$. Across this nearly three-decade range, the Nusselt number $Nu$ exhibits four distinct power-law regimes as a function of $Γ$, arising solely from geometric confinement. We show that these transport regimes are governed by qualitative changes in the anisotropy and structure of the large-scale circulation (LSC), quantified by the ratio of Reynolds numbers based on the root-mean-square horizontal and vertical velocities, $Re_u/Re_v$. For small $Γ$, vertical confinement promotes a horizontally dominant LSC and strong enhancement of heat transport. At intermediate aspect ratios, the circulation reorganizes into an efficient heat-carrying structure for which $Nu$ becomes nearly independent of $Γ$. At larger $Γ$, the LSC becomes increasingly vertically elongated and transitions to shear-driven dynamics associated with Kelvin--Helmholtz-type instability, leading to a progressive reduction in heat transport before approaching an asymptotic large-$Γ$ limit. A central

The vertical heated-pipe is widely used in thermal engineering applications, as buoyancy can help drive a flow, but several flow regimes are possible: shear-driven turbulence, laminarised flow, and convective turbulence. Steady velocity fields that maximise heat transfer have previously been calculated for heated pipe flow, but were calculated independently of buoyancy forces, and hence independently of the flow regime and time-dependent dynamics of the flow. In this work, a variational method is applied to find an optimal body force of limited magnitude that maximises heat transfer for the vertical arrangement, with the velocity field constrained by the full governing equations. In our calculations, mostly at Re=3000, it is found that streamwise-independent rolls remain optimal, as in previous steady optimisations, but that the optimal number of rolls and their radial position are dependent on the flow regime. Surprisingly, while it is generally assumed that turbulence enhances heat transfer, for the strongly forced case, time-dependence typically leads to a reduction. Beyond offering potential improvement through the targeting of the roll configuration for this application, wider

The heating of particles by plasma radiation plays a critical role in space science involving dusty plasma as well as in industrial processes such as plasma vapor deposition, microchip production, etching and plasma fusion. Numerical modeling of radiation heat transfer from plasma to nano-scale particles includes exchange of scattered thermal radiation between particles-an effect that was neglected in prior studies in which temperature of particles was estimated. Thermal modeling of gas loaded with nanoparticles differs from a typical multiphase flow, where particles are assumed to be in thermal equilibrium with the surrounding gas. In contrast, the temperature of nanoparticles heated by radiation is significantly higher than the local gas temperature. The nanoparticles volume heating by radiation is markedly different from conventional surface heating experience by macroscale particles. The larger particles are heated to higher temperatures than smaller ones. The study includes numerical modeling of thermal radiation scattered by particles in the Rayleigh regime in where particles radii are much smaller compared to the radiation wavelength and the distance between particles is lar

The corona is a structure possessed by stars, including the sun. The abnormal heating of the solar corona and chromosphere is one of the greatest mysteries in modern astronomy. While state-of-the-art observations have identified some candidates of magnetic activity events that could be responsible for this abnormal heating, and theoretical studies have proposed various heating modes, a complete physical picture of how they are heated as a whole remains elusive. In this study, the characteristics of the heated corona and chromosphere are investigated, and for the first time, the question of how they are abnormally heated is explicitly answered by analyzing the long-term observations of the global chromosphere in the Ca II K line and the global corona in the coronal green line. The findings reveal that both the quiet chromosphere and corona are in anti-phase with the solar cycle, whereas the active chromosphere and corona are in phase with it. Different parts of the solar corona and chromosphere exhibit significantly different variation characteristics, and are found to be heated by different magnetic categories and probably in different modes. This study posits that unraveling the h

Negative triangularity tokamak plasmas feature naturally enhanced confinement in the so-called L-mode regime, irrespective of the power of external heating. This is in contrast to conventional scenarios, which require exceeding a given heating power threshold to induce a discrete transition to a regime of enhanced confinement called H-mode. H-mode is, however, subject to problematic instabilities and additionally suffers from confinement degradation with increasing external heating. Using simple zero dimensional power balance and standard empirical scaling laws for confinement, we analyze the impact of external heating on several different reactor-relevant devices (i.e. SPARC, MANTA, ITER and DEMO). We compare the nominal externally heated scenarios with corresponding negative triangularity cases without external heating. For devices with sufficiently high magnetic field and/or fusion gain, the internally (Ohmically) heated negative triangularity versions achieve better performance. We conclude that Ohmically heating a negative triangularity power plant is an attractive option meriting further investigation.

Models of astrophysical convection, such as mixing length theory, typically assume that the heat transport is independent of microphysical diffusivities. Such 'diffusion-free' behaviour is, however, not observed in numerical simulations employing standard fixed-flux or fixed-temperature boundary conditions, except possibly in extreme parameter regimes that are computationally expensive to achieve. Recent numerical and experimental work has suggested that internally heated and cooled convection can exhibit diffusion-free scalings in more numerically accessible regimes. Here, we present direct numerical simulations of 2.5D Cartesian rotating thermal convection driven by an internal heating and cooling function. The use of distributed heating and cooling functions alleviates sharp thermal boundary layers that would otherwise be present, allowing the flows to be simulated with modest computational resources. We show that for high Rossby numbers this set-up recovers mixing length theory scalings for the heat transport. The velocity amplitudes, in contrast, are observed to display diffusion-limited scalings. By comparing against boundary driven rotating convection, we show that internall

We prove new bounds on the heat flux out of the bottom boundary, $\mathcal{F}_B$, for a fluid at infinite Prandtl number, heated internally between isothermal parallel plates under two kinematic boundary conditions. In uniform internally heated convection, the supply of heat equally leaves the domain by conduction when there is no flow. When the heating, quantified by the Rayleigh number, $R$, is sufficiently large, turbulent convection ensues and decreases the heat leaving the domain through the bottom boundary. In the case of no-slip boundary conditions, with the background field method, we prove that $\mathcal{F}_B \gtrsim R^{-2/3} - R^{-1/2}\log{(1-R^{-2/3})}$ up to a positive constant independent of the Rayleigh and Prandtl numbers. Whereas between stress-free boundaries we prove, $\mathcal{F}_B \gtrsim R^{-40/29} - R^{-35/29}\log{(1-R^{-40/29})}$. We perform a numerical study of the system in two dimensions up to a Rayleigh number of $5\times10^9$ with the spectral solver Dedalus. The numerical investigations indicate that $\mathcal{F}_B \sim R^{-0.092} $ and $\mathcal{F}_B \sim R^{-0.12}$ for the two kinematic boundary conditions respectively. The gap between the bounds and

In the present paper, we study a model of a thermoelastic string that is initially heated. We classify all the possible asymptotic states when time tends to infinity of such a model. Actually, we show that whatever the initial data is, a heated string must converge to a flat, steady string with uniformly distributed heat. The latter distribution is calculated from the energy conservation. In order to obtain the result, we need to take a few steps. In the first two steps, time-independent bounds from above and from below (by a positive constant) of the temperature are obtained. This is done via the Moser-like iteration. The lower bound is obtained via the Moser iteration on the negative part of the logarithm of temperature. In the third step, we obtain a time-independent higher-order estimate, which yields compactness of a sequence of the values of the solution when time tends to infinity. Here, an estimate involving the Fisher information of temperature, together with a recent functional inequality from \cite{CFHS} and an $L^2(L^2)$ estimate of the gradient of entropy, enable us to arrive at a tricky Grönwall type inequality. Finally, in the last steps, we define the dynamical syst

Although issues of open source software are created to discuss and solve technical problems, conversations can become heated, with discussants getting angry and/or agitated for a variety of reasons, such as poor suggestions or violation of community conventions. To prevent and mitigate discussions from getting heated, tools like GitHub have introduced the ability to lock issue discussions that violate the code of conduct or other community guidelines. Despite some early research on locked issues, there is a lack of understanding of how communities use this feature and of potential threats to validity for researchers relying on a dataset of locked issues as an oracle for heated discussions. To address this gap, we (i) quantitatively analyzed 79 GitHub projects that have at least one issue locked as too heated, and (ii) qualitatively analyzed all issues locked as too heated of the 79 projects, a total of 205 issues comprising 5,511 comments. We found that projects have different behaviors when locking issues: while 54 locked less than 10% of their closed issues, 14 projects locked more than 90% of their closed issues. Additionally, locked issues tend to have a similar number of comme

This work investigates heat transport in rotating internally heated convection, for a horizontally periodic fluid between parallel plates under no-slip and isothermal boundary conditions. The main results are the proof of bounds on the mean temperature, $\overline{\langle T \rangle }$, and the heat flux out of the bottom boundary, $\mathcal{F}_B$ at infinite Prandtl numbers where the Prandtl number is the nondimensional ratio of viscous to thermal diffusion. The lower bounds are functions of a Rayleigh number quantifying the ratio of internal heating to diffusion and the Ekman number, $E$, which quantifies the ratio of viscous diffusion to rotation. We utilise two different estimates on the vertical velocity, $w$, one pointwise in the domain (Yan 2004, J. Math. Phys., vol. 45(7), pp. 2718-2743) and the other an integral estimate over the domain (Constantin et al . 1999, Phys. D: Non. Phen., vol. 125, pp. 275-284), resulting in bounds valid for different regions of buoyancy-to-rotation dominated convection. Furthermore, we demonstrate that similar to rotating Rayleigh-Bénard convection, for small $E$, the critical Rayleigh number for the onset of convection asymptotically scales as

This paper studies the effects of mixed convection fluid motion and heat transmission of Al2O3-Water nanofluid in a square enclosure including two heated obstacles, with temperature and nanoparticle concentration being determined by the thermal conductivity and effective viscosity. The parametric observations of Richardson number, Reynolds number, cylinder rotating speed, and cavity inclination angles are investigated in the range of 0.1 \leq Ri \leq 10, 1 \leq Re \leq 125, 1 \leq ω\leq 25, and 0^\degree \leq γ\leq 60^\degree respectively on the thermal environment and flow arrangement inside the cavitation field. Adding nanoparticles to the base fluid enhances the heat transfer rate for both obstacles and all ranges of the parameters. The influence of wavy walls, changes in the nanofluid, and distinct positional effects also impact the flow characteristics and heat transfer process.

Nanofiber surface coating is a promising method for the enhancement of heat transfer during spray cooling. In the present work, the drop dynamics as well as local and overall heat transfer during single drop impact onto a heated wall covered with a nanofiber mat are investigated to obtain insight into the mechanisms governing the heat transport enhancement. The influence of wall superheat, drop impact velocity, and mat thickness on the hydrodynamics and heat transfer from the heated wall to the fluid is studied. Polyacrylonitrile (PAN) was electrospun on a heater surface to manufacture the nanofiber mat coatings. The experiments were conducted inside a temperature-controlled test cell with a pure vapor atmosphere maintained with refrigerant FC-72. The temperature field at the solid-fluid interface was observed with a high-speed infrared camera, and the heat flux field was derived by solving a three-dimensional transient heat conduction equation within the substrate. The presence of the nanofiber mat on the heater surface suppresses the drop receding phase due to the pinning of the contact line at the end of the spreading phase. Two different scenarios are observed depending on the

The present study numerically investigates the vortex shedding and heat transfer characteristics of a heated circular cylinder immersed in Bingham plastic fluids.The effects of three parameters, i.e., (i) plastic Reynolds number ($10 \leq Re \leq 180$), (ii) Prandtl number ($1\leq Pr \leq 100$), and (iii) the Bingham number ($0 \leq Bn \leq 10,000$), are evaluated. The Navier-Stokes and energy equations for flow and heat transfer are adopted, along with the incorporation of the Papanastasiou regularization to address the discontinuous-viscosity characteristics of Bingham plastic fluids. To illustrate the impact of fluid yield stress on the flow structure, the study provides comprehensive insights into flow transition, streamlines, shear rate and velocity distributions, the morphology of yielded/unyielded regions, and the drag coefficient ($C_d$). Additionally, the temperature distribution, the local Nusselt number ($\overline{Nu_{local}}$) along the cylinder, and the average Nusselt number on the cylinder ($\overline{Nu}$) are analyzed. The results indicate that the flow transition of Bingham fluids over a circular cylinder is dependent on external disturbances, exhibiting subcriti

We analyze the non-Fourier dual-phase-lag heat conduction process in a three-dimensional medium heated by a moving circular or annular laser beam, which is modeled by a set of point heat sources in the cross-section. In order to solve the model, Green's function approach is first used to obtain an analytical solution for the temperature distribution over the medium subjected to a single point heat source. Then the temperature distribution on the medium subjected to the laser beam can be obtained by the superposition method. According to this solution, the dependence between the heat conduction process and the cross-section of the heat source is investigated. Based on the comparison of the temperature distribution of the medium under Fourier's law and non-Fourier's law, the effect of the phase lag parameter is revealed. In addition, the effects of laser spot size and laser moving speed on the temperature distribution are also analyzed. The discovered properties provide theoretical support for the application of moving laser heat sources in various fields under the dual-phase-lag model.

By taking advantage of the trace approximation, one can gain an enormous computational advantage when solving for the global turbulent transport of impurities. In particular, this makes feasible the study of non-Maxwellian transport coupled in radius and energy, allowing collisions and transport to be accounted for on similar time scales, as occurs for fast ions. In this work, we study the fully-nonlinear ITG-driven trace turbulent transport of locally heated and injected fast ions. Previous results indicated the existence of MeV-range minorities heated by cyclotron resonance, and an associated density pinch effect. Here, we build upon this result using the t3core code to solve for the distribution of these minorities, consistently including the effects of collisions, gyrokinetic turbulence, and heating. Using the same tool to study the transport of injected fast ions, we contrast the qualitative features of their transport with that of the heated minorities. Our results indicate that heated minorities are more strongly affected by microturbulence than injected fast ions. The physical interpretation of this difference provides a possible explanation for the observed synergy when NB

With growing sophistication and volume of cyber attacks combined with complex network structures, it is becoming extremely difficult for security analysts to corroborate evidences to identify multistage campaigns on their network. This work develops HeAT (Heated Alert Triage): given a critical indicator of compromise (IoC), e.g., a severe IDS alert, HeAT produces a HeATed Attack Campaign (HAC) depicting the multistage activities that led up to the critical event. We define the concept of "Alert Episode Heat" to represent the analysts opinion of how much an event contributes to the attack campaign of the critical IoC given their knowledge of the network and security expertise. Leveraging a network-agnostic feature set, HeAT learns the essence of analyst's assessment of "HeAT" for a small set of IoC's, and applies the learned model to extract insightful attack campaigns for IoC's not seen before, even across networks by transferring what have been learned. We demonstrate the capabilities of HeAT with data collected in Collegiate Penetration Testing Competition (CPTC) and through collaboration with a real-world SOC. We developed HeAT-Gain metrics to demonstrate how analysts may assess

We demonstrate the ability of existing and planned telescopes, on the ground and in space, to directly image tidally heated exomoons orbiting gas-giant exoplanets. Tidally heated exomoons can plausibly be far more luminous than their host exoplanet and as much as 0.1% as bright as the system's stellar primary if it is a low mass star. Because emission from exomoons can be powered by tidal forces, they can shine brightly at arbitrarily large separations from the system's stellar primary with temperatures of several hundreds degrees Kelvin or even higher in extreme cases. Furthermore, these high temperatures can occur in systems that are billions of years old. Tidally heated exomoons may thus be far easier targets for direct imaging studies than giant exoplanets which must be both young and at a large projected separation from their primary to be accessible to current generation direct imaging studies. For example, the (warm) Spitzer Space Telescope and the next generation of ground based instruments could detect an exomoon roughly the size of the Earth at a temperature ~600K and a distance ~5 parsecs. Future mid-infrared space telescopes, such as JWST and SPICA, will be capable of d

The dust emission spectrum and the brightness profile of passively heated condensed cores is analyzed in relation to their astrophysical environment. The cores are modeled as critically stable self-gravitating spheres embedded at the center of self-gravitating filaments that are assumed to be either spherical or cylindrical in shape. The filaments are heated by an isotropic interstellar radiation field (ISRF). The calculations are based on a physical dust model of stochastically heated grains of diffuse interstellar dust. The spectral energy distribution (SED) of the cores is calculated using a ray-tracing technique where the effects of scattered emission and re-heating by dust grains are accurately taken into account. To compare with observational studies, the dust re-emission spectrum is approximated by a modified black-body function and the brightness profile with a Gaussian source. A simplified single-zone model for cores is presented that incorporates on the basis of the derived emissivities a first order approximation of their SED. Colder dust temperatures are, independent of the core mass, related to a higher pressure both inside and around the filament. The pressure-tempera

The interaction of liquid drops and heated surfaces is of great importance in many applications. This paper describes a numerical method, based on smoothed particle hydrodynamics (SPH), for simulating n-heptane drop impact on a heated surface. The SPH method uses numerical Lagrangian particles, which obey the laws of fluid dynamics, to describe the fluid flows. By incorporating the Peng-Robinson equation of state, the present SPH method can directly simulate both the liquid and vapor phases and the phase change process between them. The numerical method was validated by two experiments on drop impact on heated surfaces at low impact velocities. The numerical method was then used to predict drop-wall interactions at various temperatures and velocities. The model was able to predict the different outcomes, such as rebound, spread, splash, breakup, and the Leidenfrost phenomenon, consistent with the physical understanding.