共找到 20 条结果
Low-carbon liquid fuels play a key role in energy system decarbonization scenarios. This study uses a multi-sector capacity expansion model of the contiguous United States to examine fuels production in deeply decarbonized energy systems. Our analysis evaluates how the shares of biofuels, synthetic fuels, and fossil liquid fuels change under varying assumptions about resource constraints (biomass and CO2 sequestration availability), fuel demand distributions, and supply flexibility to produce different fuel products. Across all scenarios examined, biofuels provide a substantial share of liquid fuel supply, while synthetic fuels deploy only when biomass or CO2 sequestration is assumed to be more limited. Fossil liquid fuels remain in all scenarios examined, primarily driven by the extent to which their emissions can be offset with removals. Limiting biomass increases biogenic CO2 capture within biofuel pathways, while limiting sequestration availability increases the share of captured atmospheric (including biogenic) carbon directed toward utilization for synthetic fuel production. While varying assumptions about liquid fuel demand distributions and fuel product supply flexibility a
Graphene hydrogels were created and loaded with uranyl nitrate or thorium nitrate and freeze-dried to produce graphene aerogel nuclear fuels. These aerogels had densities between 0.018-0.035 g/cm3 and consisted of ~7.3 +- 0.5% uranium/thorium by mass. The ultra-low density of the aerogels allows for high energy ions to escape the fuel particles without depositing all their energy as heat, as is typical in nuclear fuels. Their measured alpha activity was ~16 pCi/mg, which could be enhanced up to ~49 pCi/mg by decreasing the thickness of aerogel samples to allow all alpha particles to escape. Additionally, high energy neutrons were used to induce fission to provide a source of fission fragments from the aerogel fuels. This novel form of nuclear fuel has potential applications in space propulsion such as fission fragment rocket engines, as well as in terrestrial applications for modular reactors, direct conversion methods, and in medical radiotherapeutics.
In "arXiv:2312.13429" Lackner et al. use standard methods to decide if it is possible to ignite mixed fuels. They correctly identify that the increased radiation losses make ignition significantly more challenging than for pure DT fuels, since this leads to higher ignition temperatures. Further, they conclude that at those temperatures the reduced electronic $α$-stopping makes ignition impossible. We show that this conclusion is not correct. The model used for $α$-stopping by Lackner et al. is only approximately correct for low temperatures and hydrogen isotopes. By extending the $α$-stopping model to include ionic $α$-stopping we show in \cite{ruhlkornarXiv5} that the contribution of ionic $α$-particle stopping cannot be neglected. The ionic $α$-stopping together with the neutron stopping, which is also neglected by Lackner et al., lead to elevated ion temperatures implying $kT_i > kT_e$. Those three effects combined lead us to the conclusion, that ignition of mixed fuels is indeed possible with far reaching implications, contrary to the analysis by Lackner.
Policies focused on deep decarbonization of regional economies emphasize electricity sector decarbonization alongside electrification of end-uses. There is growing interest in utilizing hydrogen (H2) produced via electricity to displace fossil fuels in difficult-to-electrify sectors. One such case is heavy-duty vehicles (HDV), which represent a substantial and growing share of transport emissions as light-duty vehicles electrify. Here, we assess the bulk energy system impact of decarbonizing the HDV segment via either H2, or drop-in synthetic liquid fuels produced from H2 and CO2. Our analysis soft-links two modeling approaches: (a) a bottom-up transport demand model producing a variety of final energy demand scenarios for the same service demand and (b) a multi-sectoral capacity expansion model that co-optimizes power, H2 and CO2 supply chains under technological and policy constraints to meet exogenous final energy demands. Through a case study of Western Europe in 2040 under deep decarbonization constraints, we quantify the energy system implications of different levels of H2 and synthetic fuels adoption in the HDV sector under scenarios with and without CO2 sequestration. In th
Abatement options for the hard-to-electrify parts of the transport sector are needed to achieve ambitious emissions targets. Biofuels based on biomass, electrofuels based on renewable hydrogen and a carbon source, as well as fossil fuels compensated by carbon dioxide removal (CDR) are the main options. Currently, biofuels are the only renewable fuels available at scale and are stimulated by blending mandates. Here, we estimate the system cost of enforcing such mandates in addition to an overall emissions cap for all energy sectors. We model overnight scenarios for 2040 and 2060 with the sector-coupled European energy system model PyPSA-Eur-Sec, with a high temporal resolution. The following cost drivers are identified: (i) high biomass costs due to scarcity, (ii) opportunity costs for competing usages of biomass for industry heat and combined heat and power (CHP) with carbon capture, and (iii) lower scalability and generally higher cost for biofuels compared to electrofuels and fossil fuels combined with CDR. With a -80% emissions reduction target in 2040, variable renewables, partial electrification of heat, industry and transport and biomass use for CHP and industrial heat are im
Computational models for understanding and predicting fire in wildland and managed lands are increasing in impact. Data characterizing the fuels and environment is needed to continue improvement in the fidelity and reliability of fire outcomes. This paper addresses a gap in the characterization and population of mid-story fuels, which are not easily observable either through traditional survey, where data collection is time consuming, or with remote sensing, where the mid-story is typically obscured by forest canopy. We present a methodology to address populating a mid-story using a generative model for fuel placement that captures key concepts of spatial density and heterogeneity that varies by regional or local environmental conditions. The advantage of using a parameterized generative model is the ability to calibrate (or `tune') the generated fuels based on comparison to limited observation datasets or with expert guidance, and we show how this generative model can balance information from these sources to capture the essential characteristics of the wildland fuels environment. In this paper we emphasize the connection of terrestrial LiDAR (TLS) as the observations used to cali
The growth rate of structural defects in nuclear fuels under irradiation is intrinsically related to the diffusion rates of the defects in the fuel lattice. The generation and growth of atomistic structural defects can significantly alter the performance characteristics of the fuel. This alteration of functionality must be accurately captured to qualify a nuclear fuel for use in reactors. Predicting the diffusion coefficients of defects and how they impact macroscale properties such as swelling, gas release, and creep is therefore of significant importance in both the design of new nuclear fuels and the assessment of current fuel types. In this article, we apply data-driven methods focusing on machine learning (ML) to determine various diffusion properties of two nuclear fuels, uranium oxide and uranium nitride. We show that using ML can increase, often significantly, the accuracy of predicting diffusivity in nuclear fuels in comparison to current analytical models. We also illustrate how ML can be used to quickly develop fuel models with parameter dependencies that are more complex and robust than what is currently available in the literature. These results suggest there is potent
In the present work, a generative deep learning framework combining a Co-optimized Variational Autoencoder (Co-VAE) architecture with quantitative structure-property relationship (QSPR) techniques is developed to enable accelerated inverse design of fuels. The Co-VAE integrates a property prediction component coupled with the VAE latent space, enhancing molecular reconstruction and accurate estimation of Research Octane Number (RON) (chosen as the fuel property of interest). A subset of the GDB-13 database, enriched with a curated RON database, is used for model training. Hyperparameter tuning is further utilized to optimize the balance among reconstruction fidelity, chemical validity, and RON prediction. An independent regression model is then used to refine RON prediction, while a differential evolution algorithm is employed to efficiently navigate the VAE latent space and identify promising fuel molecule candidates with high RON. This methodology addresses the limitations of traditional fuel screening approaches by capturing complex structure-property relationships within a comprehensive latent representation. The generative model can be adapted to different target properties, e
Potential strategies for the development and large-scale application of renewable energy sources aimed at reducing the usage of carbon-based fossil fuels are assessed here, especially in the event of the abandonment of such fuels. The aim is to aid the initiative to reduce the harmful effects of carbon-based fossil fuels on the environment and ensure a reduction in greenhouse gases and sustainability of natural resources. Small-scale renewable energy application for heating, cooling, and electricity generation in households and commercial buildings are already underway around the world. Hydrogen (H2) and ammonia (NH3), which are presently produced using fossil fuels, already have significant applications in society and industry, and are therefore good candidates for large-scale production through the use of renewable energy sources. This will help to reduce the greenhouse gas emissions appreciably around the world. While the first-generation biofuels production using food crops may not be suitable for long-range fuel production, due to competition with the food supply, the 2nd, 3rd and 4th generation biofuels have the potential to produce large, worldwide supplies of fuels. Product
This work presents experimental study on opposed flow flame spread over thin hollow cylindrical cellulosic fuel of diameters varying from 10 mm to 49 mm in microgravity environment. To understand the effect of flow and geometry on flame spread, experiments are conducted in low convective opposed flow conditions ranging from 10 cm/s to 30 cm/s for both hollow cylindrical and planar fuels at oxygen concentration of 21% and 1 atm pressure. In the microgravity environment the flame length and the flame spread rate are seen to increase with increase in hollow cylindrical fuel diameter over the flow range studied here. The flame spread rate exhibited a non-monotonic trend with flow speed, for flow of large diameter whereas a monotonic increasing trend is noted for small diameters. The flame spread rate over hollow cylindrical fuel is noted to be higher or at most equal compared to planar fuels over the matrix of experiments conducted in this study. A simplified analysis is carried out to arrive at an expression for flame spread rate over thin hollow cylindrical fuels. The analysis shows that the radiation heat transfer from the hot char to the inner surface of hollow virgin fuel dictates
Nanostructured solid boron-hydrogen compounds have been suggested as target and fuel for laser fusion, offering improved laser-plasma coupling, avoiding cryogenic fuel handling and fuel pre-compression and ultimately allowing a transit from DT- to aneutronic pB- fusion power production. We describe the scaling of the different energy loss channels (α-particle escape, bremsstrahlung, hydrodynamic expansion work, electron heat conduction) with mixed fuel composition using partial inverse gains (Q's) which allow a simple superposition of losses. This highlights in particular the negative synergy between these loss-channels for such mixed fuels: the dominance of bremsstrahlung over fusion power at low temperatures forces a shift of operation to higher ones, where the plasma gets more transparent to α-particles, and hydrodynamic and heat conduction losses increase strongly. The use of mixed fuels therefore does not eliminate the need for strong precompression of the fuel: in fact, it renders achieving burning plasma conditions much more difficult, if not impossible. A recent suggestion to use tamping of the fuel by cladding with a heavy metal would only reduce hydrodynamic expansion los
The Inflation Reduction Act (IRA) in the United States provides unprecedented incentives for deploying low-carbon hydrogen and liquid fuels, among other low greenhouse gas (GHG) emissions technologies. To better understand the prospective competitiveness of low-carbon or negative-carbon hydrogen and liquid fuels under the IRA in the early 2030s, we examine the impacts of IRA provisions on costs of producing hydrogen and synthetic liquid fuel made from natural gas, electricity, short-cycle biomass (agricultural residues), and corn-ethanol. With IRA credits (45V or 45Q), but excluding incentives provided by other national or state policies, hydrogen produced by electrolysis using carbon-free electricity (green H2) and natural gas reforming with carbon capture and storage (CCS) (blue H2) are cost-competitive with the carbon-intensive benchmark gray H2 from steam methane reforming. Biomass-derived H2 with or without CCS is not cost-completive under current IRA provisions. However, if IRA allowed biomass gasification with CCS to claim a 45V credit for carbon-neutral H2 and a 45Q credit for negative biogenic-CO2 emissions, this pathway would be less costly than gray H2. The IRA credit fo
Electricity-based fuels from renewable energies are regarded as a key instrument for climate protection. These Power-to-X (PtX) products are to replace fossil fuels in sectors where direct use of electricity from renewable energies is not possible. We investigate the production potential of PtX fuels from onshore wind energy and ground-mounted photovoltaic energy for all countries outside the European Economic Area along 14 PtX production pathways. These include hydrogen, several hydrocarbons and ammonia. The technical and economic potential assessment is based on data with hourly temporal and high spatial resolution. The analysis considers various criteria, including weather conditions, nature conservation concerns and land use. The results show the production quantities and costs of climate-friendly fuel production under strict sustainability criteria and locate them spatially. It is shown that many regions of the world are well suited to produce PtX products. The production quantity outside Europe is up to 120,000 TWh/yr of hydrogen or 87,000 TWh/yr of hydrocarbons in the long term. We identify 97 countries with potentials, of which 38 countries possess relevant potentials of mo
Wildland fires impact ecosystems and communities worldwide. Many wildfires burn in living or a mixture of living and senescent vegetation. Therefore, it is necessary to understand the burning behavior of living fuels, in contrast to just dead or dried fuels, to more effectively support fire management decisions. In this study, the ignition and burning behaviors of needles placed in convective heat flux were evaluated. The species included longleaf pine (Pinus palustris), Douglas-fir (Pseudotsuga menziesii), western red cedar (Thuja plicata), ponderosa pine (Pinus ponderosa), western larch (Larix occidentalis), pacific yew (Taxus brevifolia), white spruce (Picea glauca), and sagebrush (Artemisia tridentate). The ignition and burning behaviors were related to live fuel moisture content (LFMC), pilot flame temperatures, and convective heat fluxes. The different phases of ignition and burning were captured using high-speed imaging. In general, four burning phases can be observed: droplet ejection and burning, a transition phase, flaming combustion, and smoldering combustion. Ejection and subsequent burning of droplets can occur prior to sustained flaming ignition only in live fuels. Fo
The paper investigates the feasibility of achieving uniform high-power volume heating for a fusion reactor concept employing a mixed fuel composition involving $\text{pBDT}$. The realm of mixed fuel fusion concepts remains relatively unexplored. The pursuit of uniform high-power volume heating presents a technological challenge, yet it bears ramifications for fusion reactor designs. In this study, we introduce the proposition of employing embedded nano-structures that represent structured foams. These structured foams interact with short-pulse lasers, thereby achieving ultra-high power volume heating both within the fuel and the adjacent hohlraums. Notably, structured foams exhibit superior efficiency compared to unstructured foams, plasma or surfaces when it comes to absorbing high-power, short-pulse lasers. The suggested incorporation of these embedded structured foams interacting with an array of ultra-short laser pulses offers a high laser absorption power density, along with meticulous control over energy and power distribution within the fuel, both in spatial and temporal dimensions. This holds the potential for the realization of fusion reactors characterized by straight-for
Synthetic fuels are crucial for decarbonizing the transportation sector. A significant challenge lies in the rapid and efficient characterization of these fuels. Chemometric methods using ATR-FTIR data offer a potential alternative to conventional techniques. This study expands the applicability and performance of chemometric models by providing an extensive ATR-FTIR spectral dataset and exploring various data enhancement strategies. Data enhancement was achieved by semi-supervised data generation, consistency enforcement through unsupervised data augmentation, and data imputation using synthetic spectra blending and pseudo-labeling. Models were trained on surrogate fuels and rigorously tested on real fuels, representing out-of-distribution testing conditions. We believe that this work will enhance the adoption of chemometric models for fuel characterization.
The Fuel Optimizer is an inverse design framework for sustainable aviation fuels that starts from a user-defined merit function and identifies the optimal combination of chemical species or hydrocarbon families that optimize a combination of targets. As a case study, a database of fuel blends meeting selected property standards was simulated in a reactor model to obtain pollutant emissions at cruise conditions. A surrogate model was developed to reduce the computational cost of evaluating candidate blends, taking fuel composition as input and predicting emissions as output. A genetic algorithm was used to optimize fuel formulation according to two merit functions designed to break the nitrogen oxides - CO trade-off, and minimize pollutant emissions over the landing-and-take-off cycle. Constraints included selected property standards (including seal swelling) and composition limits. Fuel candidates from the framework outperformed the training database across all merit functions, and the optimal candidates were validated through reactor simulations.
The injection of transverse jets into supersonic compressible crossflows represents a fundamental configuration relevant to a spectrum of high-speed applications. The intricate interactions arising between the crossflow and the injected jet induce complex flow phenomena, including shock waves and vortical structures, the characteristics of which are significantly contingent upon the thermophysical properties of the injected fuel. While prior investigations have addressed the influence of various fuels, a knowledge gap persists concerning the behaviour of alternative and synthetic multicomponent fuels within this flow regime. The present work employs high-fidelity large-eddy simulations (LES) to examine the impact of ten distinct fuels-hydrogen, methane, ethylene, ammonia, syngas mixture, and a synthetic blend, alongside several NH3/H2/N2 mixtures-on the macroscopic flow structures and mixing attributes within a transverse sonic jet immersed in a Mach 2 crossflow. By maintaining a uniform momentum flux ratio across the investigated cases, the study aims to isolate the influence of the unique thermophysical properties of each fuel on the windward mixing layer, a region critically imp
This paper proposes a time-warping transfer learning method, a technique for temporally rescaling the learned dynamics of a recurrent neural network (RNN) with a Long Short-Term Memory (LSTM) layer to enable task transfer across fuel moisture classes. Fuel moisture content (FMC) is divided into idealized classes based on characteristic lag time. Large quantities of real-time data are available for 10h fuels from sensors on weather stations, but observations of other fuel classes are sparse in space and time. We use transfer learning to adapt an RNN pretrained on 10h FMC to predict FMC for 1h, 100h, and 1000h fuels. We validate this method using data from a landmark field study conducted in Oklahoma that was used to calibrate the state-of-the-art Nelson fuel moisture model.
Fuel moisture content (FMC) is a key predictor for wildfire rate of spread (ROS). Machine learning models of FMC are being used more in recent years, augmenting or replacing traditional physics-based approaches. Wildfire rate of spread (ROS) has a highly nonlinear relationship with FMC, where small differences in dry fuels lead to large differences in ROS. In this study, custom loss functions that place more weight on dry fuels were examined with a variety of machine learning models of FMC. The models were evaluated with a spatiotemporal cross-validation procedure to examine whether the custom loss functions led to more accurate forecasts of ROS. Results show that the custom loss functions improved accuracy for ROS forecasts by a small amount. Further research would be needed to establish whether the improvement in ROS forecasts leads to more accurate real-time wildfire simulations.