State-of-the-art methods can recover accurate overall 3D human body motion from in-the-wild videos. However, they often fail to capture fine-grained articulations, especially in the feet, which are critical for applications such as gait analysis and animation. This limitation results from training datasets with inaccurate foot annotations and limited foot motion diversity. We address this gap with FootMR, a Foot Motion Refinement method that refines foot motion estimated by an existing human recovery model through lifting 2D foot keypoint sequences to 3D. By avoiding direct image input, FootMR circumvents inaccurate image-3D annotation pairs and can instead leverage large-scale motion capture data. To resolve ambiguities of 2D-to-3D lifting, FootMR incorporates knee and foot motion as context and predicts only residual foot motion. Generalization to extreme foot poses is further improved by representing joints in global rather than parent-relative rotations and applying extensive data augmentation. To support evaluation of foot motion reconstruction, we introduce MOOF, a 2D dataset of complex foot movements. Experiments on MOOF, MOYO, and RICH show that FootMR outperforms state-of-
Foot trajectory planning for dry adhesion legged climbing robots presents challenges, as the phases of foot detachment, swing, and adhesion significantly influence the adhesion and detachment forces essential for stable climbing. To tackle this, an end-to-end foot trajectory and force optimization framework (FTFOF) is proposed, which optimizes foot adhesion and detachment forces through trajectory adjustments. This framework accepts general foot trajectory constraints and user-defined parameters as input, ultimately producing an optimal single foot trajectory. It integrates three-segment $C^2$ continuous Bezier curves, tailored to various foot structures, enabling the generation of effective climbing trajectories. A dilate-based GRU predictive model establishes the relationship between foot trajectories and the corresponding foot forces. Multi-objective optimization algorithms, combined with a redundancy hierarchical strategy, identify the most suitable foot trajectory for specific tasks, thereby ensuring optimal performance across detachment force, adhesion force and vibration amplitude. Experimental validation on the quadruped climbing robot MST-M3F showed that, compared to commo
Foot contact plays a critical role in human interaction with the world, and thus exploring foot contact can advance our understanding of human movement and physical interaction. Despite its importance, existing methods often approximate foot contact using a zero-velocity constraint and focus on joint-level contact, failing to capture the detailed interaction between the foot and the world. Dense estimation of foot contact is crucial for accurately modeling this interaction, yet predicting dense foot contact from a single RGB image remains largely underexplored. There are two main challenges for learning dense foot contact estimation. First, shoes exhibit highly diverse appearances, making it difficult for models to generalize across different styles. Second, ground often has a monotonous appearance, making it difficult to extract informative features. To tackle these issues, we present a FEet COntact estimation (FECO) framework that learns dense foot contact with shoe style-invariant and ground-aware learning. To overcome the challenge of shoe appearance diversity, our approach incorporates shoe style adversarial training that enforces shoe style-invariant features for contact esti
This paper presents the modeling, design, and experimental validation of an Ellipse-based Segmented Varying Curvature (ESVC) foot for bipedal robots. Inspired by the segmented curvature rollover shape of human feet, the ESVC foot aims to enhance gait energy efficiency while maintaining analytical tractability for foot location based controller. First, we derive a complete analytical contact model for the ESVC foot by formulating spatial transformations of elliptical segments only using elementary functions. Then a nonlinear programming approach is engaged to determine optimal elliptical parameters of hind foot and fore foot based on a known mid-foot. An error compensation method is introduced to address approximation inaccuracies in rollover length calculation. The proposed ESVC foot is then integrated with a Hybrid Linear Inverted Pendulum model-based walking controller and validated through both simulation and physical experiments on the TT II biped robot. Experimental results across marking time, sagittal, and lateral walking tasks show that the ESVC foot consistently reduces energy consumption compared to line, and flat feet, with up to 18.52\% improvement in lateral walking. T
The ESVC(Ellipse-based Segmental Varying Curvature) foot, a robot foot design inspired by the rollover shape of the human foot, significantly enhances the energy efficiency of the robot walking gait. However, due to the tilt of the supporting leg, the error of the contact model are amplified, making robot state estimation more challenging. Therefore, this paper focuses on the noise analysis and state estimation for robot walking with the ESVC foot. First, through physical robot experiments, we investigate the effect of the ESVC foot on robot measurement noise and process noise. and a noise-time regression model using sliding window strategy is developed. Then, a hierarchical adaptive state estimator for biped robots with the ESVC foot is proposed. The state estimator consists of two stages: pre-estimation and post-estimation. In the pre-estimation stage, a data fusion-based estimation is employed to process the sensory data. During post-estimation, the acceleration of center of mass is first estimated, and then the noise covariance matrices are adjusted based on the regression model. Following that, an EKF(Extended Kalman Filter) based approach is applied to estimate the centroid s
How skeletal architecture and landing posture shape the immediate post-impact viscoelastic response of the foot remains incompletely understood, in part because cadaveric specimens are ill-suited to repeated impact testing across postures. In this study, we developed an anthropomimetic foot joint structure aimed at replicating the skeletal geometry of the human foot. Using a vertical drop apparatus that simulates landing and a viscoelastic system-identification model, we investigated how skeletal structure and posture modulate the apparent post-impact viscoelastic response. The results show that the multi-jointed anthropomimetic structure exhibited a higher damping ratio than simplified flat and rigid feet. Moreover, ankle dorsiflexion and toe extension systematically shifted the identified parameters, reducing the damping ratio under the tested conditions. Taken together, these findings indicate that an arch-like, multi-jointed skeletal architecture can enhance impact attenuation in an anthropomimetic mechanical foot, and that morphology and passive posture alone can tune the trade-off between attenuation and rebound. The observed trends are qualitatively consistent with reported
Diabetic foot ulcers (DFUs) are a severe complication of diabetes associated with significant morbidity, amputation risk, and healthcare burden. Developing effective continuous monitoring frameworks requires first establishing reliable baseline models of normal foot biomechanics. This paper presents a feasibility study of an anomaly detection framework applied to time-series data from wearable foot sensors, specifically NTC thin-film thermocouples for temperature and FlexiForce A401 pressure sensors for plantar load monitoring. Data were collected from healthy adult subjects across 312 capture sessions on an instrumented pathway, generating 93,790 valid multi-sensor readings spanning September 2023 to June 2024. Two unsupervised algorithms, Isolation Forest and K-Nearest Neighbors using Local Outlier Factor (KNN/LOF), were applied to detect statistical deviations in foot temperature and pressure signals. Results show that Isolation Forest is more sensitive to subtle, distributed anomalies, while KNN/LOF identifies concentrated extreme deviations but flags a higher proportion of sessions not corroborated by Isolation Forest. Since no clinical ground truth is available, this differen
The FOOT (FragmentatiOn Of Target) experiment was proposed to measure double differential nuclear fragmentation cross sections in angle and kinetic energy of the produced fragments in beam-target settings, interesting for hadrontherapy and space radioprotection applications. In particular, FOOT measures projectile and target fragmentations in the kinetic energy range between $200 \text{MeV/u}$ and $800 \text{MeV/u}$. In this contribution, differential cross section measurements of a $400 \text{MeV/u}$ $^{16}$O beam on a Carbon and a polyethylene target with data acquired at GSI (Darmstadt, Germany) beam accelerator facility are presented, along with the extraction of the first total fragmentation cross section for a Hydrogen target within the FOOT experiment.
Accurate knowledge of nuclear fragmentation cross-sections is essential for optimizing charged particle therapy. In this study, conducted within the framework of the FOOT (FragmentatiOn Of Target) experiment, we present the first measurements with a large angular acceptance of total charge-changing cross-section and the cross-section for the production of fragments (production cross-section) for $^{16}$O ions interacting with Carbon (C) and Polyethylene (C$_2$H$_4$) targets in the kinetic energy range of 80 to 200 MeV/nucleon. Measurements were performed using the Emulsion Cloud Chamber (ECC) technique, which combines high spatial resolution and angular acceptance, up to 45$^\circ$. The results are compared with Monte Carlo model predictions. Moreover, the total charge-changing and fragment production cross-sections for $^{16}$O on Hydrogen in the same energy range are derived.
Defant and Kravitz considered the following problem: Suppose that, to the right of a foot, there is a line of colored socks that needs to be sorted. However, at any point in time, one can only either place the leftmost sock to the right of the foot onto the foot (stack) or remove the outermost sock on the foot and make it the rightmost sock to the left of the foot (unstack). In this paper, we explicitly describe all minimal initial sock orderings that are unsortable.
This paper proposes a novel contact and wearable sensing system for estimating the upper body posture and joint angles (ankle, knee, and hip) of the human body using foot pressure distribution information obtained from a sensor attached to the plantar region. In the proposed estimation method, sensors are installed only on the plantar region, which is the end of the human body and the point of contact with the environment. The posture and joint angles of other parts of the body are estimated using only this information. As a contact and wearable sensor, the proposed system differs from previous measurement systems in the sense that the sensor does not need to be placed near the target joint or body. The estimation was carried out using a multivariate linear regression model with the foot pressure distribution as the input and the joint angle or posture as the output. The results reveal that it is possible to estimate the posture and joint angles of the human body from foot pressure distribution information (R2$\fallingdotseq$0.9). The proposed estimation method was validated by morphological computation to confirm that it is enabled by foot morphology. The validation approach compa
Particle Therapy (PT) has emerged as a powerful tool in cancer treatment, leveraging the unique dose distribution of charged particles to deliver high radiation levels to the tumor while minimizing damage to surrounding healthy tissue. Despite its advantages, further improvements in Treatment Planning Systems (TPS) are needed to address uncertainties related to fragmentation process, which can affect both dose deposition and effectiveness. These fragmentation effects also play a critical role in Radiation Protection in Space, where astronauts are exposed to high level of radiation, necessitating precise models for shielding optimization. The FOOT (FragmentatiOn Of Target) experiment addresses these challenges by measuring fragmentation cross-section with high precision, providing essential data for improving TPS for PT and space radiation protection strategies. This thesis contributes to the FOOT experiment in two key areas. First, it focuses on the performances of the vertex detector, which is responsible for reconstructing particle tracks and fragmentation vertexes with high spatial resolution. The study evaluates the detector's reconstruction algorithm and its efficiency to dete
A detailed understanding of foot morphology can enable the design of more comfortable and better fitting footwear. However, foot morphology varies widely within the population, and changes dynamically during the loading of stance phase. This study presents a parametric statistical shape model from 4D foot scans to capture both the inter- and intra-individual variability in foot morphology. Thirty subjects walked on a treadmill while 4D scans of their right foot were taken at 90 frames-per-second during stance phase. Each subject's height, weight, foot length, foot width, arch length, and sex were also recorded. The 4D scans were all registered to a common high-quality foot scan, and a principal component analysis was done on all processed 4D scans. Elastic-net linear regression models were built to predict the principal component scores, which were then inverse transformed into 4D scans. The best performing model was selected with leave-one-out cross-validation. The chosen model was predicts foot morphology across stance phase with a root-mean squared error of 5.2 +/- 2.0 mm. This study shows that statistical shape modeling can be used to predict dynamic changes in foot morphology
Human motion synthesis and editing are essential to many applications like film post-production. However, they often introduce artefacts in motions, which can be detrimental to the perceived realism. In particular, footskating is a frequent and disturbing artefact requiring foot contacts knowledge to be cleaned up. Current approaches to obtain foot contact labels rely either on unreliable threshold-based heuristics or on tedious manual annotation. In this article, we address foot contact label detection from motion with a deep learning. To this end, we first publicly release UnderPressure, a novel motion capture database labelled with pressure insoles data serving as reliable knowledge of foot contact with the ground. Then, we design and train a deep neural network to estimate ground reaction forces exerted on the feet from motion data and then derive accurate foot contact labels. The evaluation of our model shows that we significantly outperform heuristic approaches based on height and velocity thresholds and that our approach is much more robust on motion sequences suffering from perturbations like noise or footskate. We further propose a fully automatic workflow for footskate cl
Accurate 3D foot reconstruction is crucial for personalized orthotics, digital healthcare, and virtual fittings. However, existing methods struggle with incomplete scans and anatomical variations, particularly in self-scanning scenarios where user mobility is limited, making it difficult to capture areas like the arch and heel. We present a novel end-to-end pipeline that refines Structure-from-Motion (SfM) reconstruction. It first resolves scan alignment ambiguities using SE(3) canonicalization with a viewpoint prediction module, then completes missing geometry through an attention-based network trained on synthetically augmented point clouds. Our approach achieves state-of-the-art performance on reconstruction metrics while preserving clinically validated anatomical fidelity. By combining synthetic training data with learned geometric priors, we enable robust foot reconstruction under real-world capture conditions, unlocking new opportunities for mobile-based 3D scanning in healthcare and retail.
There has been a controversy as to whether or not the non-pathological flat foot and high-arched foot have an effect on human walking activities. The 3D foot scanning system was employed to obtain static footprints from subjects adopting a half-weight-bearing stance. Based upon their footprints, the subjects were divided into two groups: the flat-footed and the high-arched. The plantar pressure measurement system was used to measure and record the subjects' successive natural gaits. Two indices were proposed: distribution of vertical ground reaction force (VGRF) of plantar and the rate of the footprint areas. Using these two indices to compare the natural gaits of the two subject groups, we found that (1) in stance phase, there is a significant difference (p<0.01) in the distributions of VGRF of plantar; (2) in a stride cycle, there is also a significant difference (p<0.01) in the rates of the footprint areas. Our analysis suggests that when walking, the VGRF of the plantar brings greater muscle tension to the flat-footed while a smaller rate of the footprint areas brings greater stability to the high-arched.
With the proliferation of smart phone, a major growth in the use of apps related to the health category, specifically those concerned with foot health can be observed. Although new, these apps are being used practically for scanning feet with an aim to providing accurate information about various properties of the human foot. With the availability of many 'foot scanning and measuring apps' in the app stores, the need for an evaluation system for such apps can be deemed necessary as little information regarding the evidence-based quality of these apps is available. To characterize the assessment of measurement techniques and essential software quality characteristics of mobile foot measuring apps, and determine their effectiveness for potential use as commercial professional tools for foot care health professionals such as pedorthists, podiatrists, orthotists and so on, to assist in measuring foot for custom shoes, and for individuals to enhance the awareness of foot health and hygiene and prevention of foot-related problems. An electronic search across Android and iOS app stores was conducted between July 2020 and August 2020 for apps related to foot measurement. Mobile apps with s
Humans rely on foot stiffness to withstand the propulsive forces of walking and running. Skeletal adaptations that increase foot stiffness include the medial longitudinal arch (MLA) and the transverse tarsal arch (TTA). The TTA has been hypothesized to stiffen the foot through cross-axis coupling of transverse intermetatarsal stiffness with sagittal-plane midfoot stiffness, but this has been tested only in cadaveric specimens. In vivo testing is essential because muscle contraction substantially modulates MLA function and may similarly affect the TTA's cross-axis coupling. Here we provide in vivo evidence for the TTA's contribution to foot stiffness by externally increasing intermetatarsal stiffness and measuring its effects on midfoot elasticity during walking. As predicted by the cross-axis coupling hypothesis, increasing intermetatarsal stiffness with an elastic tape wrapped around the forefoot reduced the energy absorbed in midfoot flattening and increased sagittal-plane midfoot stiffness concomitantly (mean,$\pm$,standard error of the mean (SEM): $13.9\% \pm 3\%$ and $16.8\% \pm 5.8\%$, respectively). However, taping did not change the curvature of the TTA, thereby isolating t
It is important to understand how bipedal walkers balance and walk effectively on granular materials, such as sand and loose dirt, etc. This paper first presents a computational approach to obtain the motion and energy analysis of bipedal walkers on granular terrains and then discusses an optimization method for the robot foot-shape contour design for energy efficiently walking. We first present the foot-terrain interaction characteristics of the intrusion process using the resistive force theory that provides comprehensive force laws. Using human gait profiles, we compute and compare the ground reaction forces and the external work for walking gaits with various foot shapes on granular terrains. A multi-objective optimization problem is finally formulated for the foot contour design considering energy saving and walking efficiency. It is interesting to find out a non-convex foot shape gives the best performance in term of energy and locomotion efficiency on hard granular terrains. The presented work provides an enabling tool to further understand and design efficient and effective bipedal walkers on granular terrains.
This paper presents the measurements of the angular differential cross sections for the forward production of He, Li, Be, B, C and N nuclei in the fragmentation process of a 400$\text{MeV/nucleon}$ $^{16}\text{O}$ beam interacting with a graphite target. Due to the limited data available in this energy regime, these measurements of nuclear fragmentation cross sections are relevant to improve nuclear interaction models for Particle Therapy and space radioprotection applications. The data analyzed in this paper were collected during a measurement campaign carried out at the GSI Helmholtz Center for Heavy Ion Research facility in Darmstadt (Germany) by the FOOT collaboration. The results are compared with similar results found in the literature and with a previous FOOT measurement of the same process, using the same setup, from a previous pilot run performed at GSI. The pilot run data, however, had limited statistics and only allowed for the measurement of elemental fragmentation cross sections integrated in the setup acceptance. This data set, with statistics more than 100 times larger compared to the data collected in the previous run, enabled the measurement of angular differential