Teleoperation presents a promising paradigm for remote control and robot proprioceptive data collection. Despite recent progress, current teleoperation systems still suffer from limitations in efficiency and ergonomics, particularly in challenging scenarios. In this paper, we propose CaFe-TeleVision, a coarse-to-fine teleoperation system with immersive situated visualization for enhanced ergonomics. At its core, a coarse-to-fine control mechanism is proposed in the retargeting module to bridge workspace disparities, jointly optimizing efficiency and physical ergonomics. To stream immersive feedback with adequate visual cues for human vision systems, an on-demand situated visualization technique is integrated in the perception module, which reduces the cognitive load for multi-view processing. The system is built on a humanoid collaborative robot and validated with six challenging bimanual manipulation tasks. User study among 24 participants confirms that CaFe-TeleVision enhances ergonomics with statistical significance, indicating a lower task load and a higher user acceptance during teleoperation. Quantitative results also validate the superior performance of our system across six
An end-to-end hardware-software pipeline is introduced to automatize ergonomics assessment in industrial workplaces. The proposed modular solution can interoperate with commercial systems throughout the ergonomics assessment phases involved in the process. The pipeline includes custom-designed Inertial Measurement Unit (IMU) sensors, two real-time worker movement acquisition tools, inverse kinematics processing and Rapid Upper Limb Assessment (RULA) report generation. It is based on free tools such as Unity3D and OpenSim to avoid the problems derived from using proprietary technologies, such as security decisions being made under "black box" conditions. Experiments were conducted in an automotive factory in a workplace with WMSDs risk among workers. The proposed solution obtained comparable results to a gold standard solution, reaching measured joint angles a 0.95 cross-correlation and a Root Mean Square Error (RMSE) lower than 10 for elbows and 12 for shoulders between both systems. In addition, the global RULA score difference is lower than 5% between both systems. This work provides a low-cost solution for WMSDs risk assessment in the workplace to reduce musculoskeletal disorder
Soft robotic suits have the potential to rehabilitate, assist, and augment the human body. The low weight, cost, and minimal form-factor of these devices make them ideal for daily use by both healthy and impaired individuals. However, challenges associated with data-driven, user-specific, and comfort-first design of human-robot interfaces using soft materials limit their widespread translation and adoption. In this work, we present the quantitative evaluation of ergonomics and comfort of the Elevate suit - a cable driven soft robotic suit that assists shoulder elevation. Using a motion-capture system and force sensors, we measured the suit's ergonomics during assisted shoulder elevation up to 70 degrees. Two 4-hour sessions were conducted with one subject, involving transmitting cable tensions of up to 200N with no discomfort reported. We estimated that the pressure applied to the shoulder during assisted movements was within the range seen in a human grasp (approximately 69.1-85.1kPa), and estimated volumetric compression of <3% and <8% across the torso and upper arm, respectively. These results provide early validation of Elevate's ergonomic design in preparation for future
This paper introduces an upper limb postural optimization method for enhancing physical ergonomics and force manipulability during bimanual human-robot co-carrying tasks. Existing research typically emphasizes human safety or manipulative efficiency, whereas our proposed method uniquely integrates both aspects to strengthen collaboration across diverse conditions (e.g., different grasping postures of humans, and different shapes of objects). Specifically, the joint angles of a simplified human skeleton model are optimized by minimizing the cost function to prioritize safety and manipulative capability. To guide humans towards the optimized posture, the reference end-effector poses of the robot are generated through a transformation module. A bimanual model predictive impedance controller (MPIC) is proposed for our human-like robot, CURI, to recalibrate the end effector poses through planned trajectories. The proposed method has been validated through various subjects and objects during human-human collaboration (HHC) and human-robot collaboration (HRC). The experimental results demonstrate significant improvement in muscle conditions by comparing the activation of target muscles be
Working memory is a promising paradigm for assessing cognitive ergonomics of brain states in brain-computer interfaces(BCIs). This study decodes these states with a focus on environmental illumination effects via two distinct working memory tasks(Recall and Sequence) for mixed-recognition analysis. Leveraging nonlinear patterns in brain connectivity, we propose an innovative framework: multi-regional dynamic interplay patterns based on beta phase synchrony dynamics, to identify low-dimensional EEG regions (prefrontal, temporal, parietal) for state recognition. Based on nonlinear phase map analysis of the above three brain regions using beta-phase connectivity, we found that: (1)Temporal-parietal phase clustering outperforms other regional combinations in distinguishing memory states; (2)Illumination-enhanced environments optimize temporoparietal balance;(3) Machine learning confirms temporal-parietal synchrony as the dominant cross-task classification feature. These results provide a precise prediction algorithm, facilitating a low-dimensional system using temporal and parietal EEG channels with practical value for real-time cognitive ergonomics assessment in BCIs and optimized hum
The integration of collaborative robots into industrial environments has improved productivity, but has also highlighted significant challenges related to operator safety and ergonomics. This paper proposes an innovative framework that integrates advanced visual perception, continuous ergonomic monitoring, and adaptive Behaviour Tree decision-making to overcome the limitations of traditional methods that typically operate as isolated components. Our approach synthesizes deep learning models, advanced tracking algorithms, and dynamic ergonomic assessments into a modular, scalable, and adaptive system. Experimental validation demonstrates the framework's superiority over existing solutions across multiple dimensions: the visual perception module outperformed previous detection models with 72.4% mAP@50:95; the system achieved high accuracy in recognizing operator intentions (92.5%); it promptly classified ergonomic risks with minimal latency (0.57 seconds); and it dynamically managed robotic interventions with exceptionally responsive decision-making capabilities (0.07 seconds), representing a 56% improvement over benchmark systems. This comprehensive solution provides a robust platfo
Integrating cognitive ergonomics with LLMs is crucial for improving safety, reliability, and user satisfaction in human-AI interactions. Current LLM designs often lack this integration, resulting in systems that may not fully align with human cognitive capabilities and limitations. This oversight exacerbates biases in LLM outputs and leads to suboptimal user experiences due to inconsistent application of user-centered design principles. Researchers are increasingly leveraging NLP, particularly LLMs, to model and understand human behavior across social sciences, psychology, psychiatry, health, and neuroscience. Our position paper explores the need to integrate cognitive ergonomics into LLM design, providing a comprehensive framework and practical guidelines for ethical development. By addressing these challenges, we aim to advance safer, more reliable, and ethically sound human-AI interactions.
This paper describes a novel approach in human robot interaction driven by ergonomics. With a clear focus on optimising ergonomics, the approach proposed here continuously observes a human user's posture and by invoking appropriate cooperative robot movements, the user's posture is, whenever required, brought back to an ergonomic optimum. Effectively, the new protocol optimises the human-robot relative position and orientation as a function of human ergonomics. An RGB-D camera is used to calculate and monitor human joint angles in real-time and to determine the current ergonomics state. A total of 6 main causes of low ergonomic states are identified, leading to 6 universal robot responses to allow the human to return to an optimal ergonomics state. The algorithmic framework identifies these 6 causes and controls the cooperating robot to always adapt the environment (e.g. change the pose of the workpiece) in a way that is ergonomically most comfortable for the interacting user. Hence, human-robot interaction is continuously re-evaluated optimizing ergonomics states. The approach is validated through an experimental study, based on established ergonomic methods and their adaptation f
In collaborative tasks where humans work alongside machines, the robot's movements and behaviour can have a significant impact on the operator's safety, health, and comfort. To address this issue, we present a multi-stereo camera system that continuously monitors the operator's posture while they work with the robot. This system uses a novel distributed fusion approach to assess the operator's posture in real-time and to help avoid uncomfortable or unsafe positions. The system adjusts the robot's movements and informs the operator of any incorrect or potentially harmful postures, reducing the risk of accidents, strain, and musculoskeletal disorders. The analysis is personalized, taking into account the unique anthropometric characteristics of each operator, to ensure optimal ergonomics. The results of our experiments show that the proposed approach leads to improved human body postures and offers a promising solution for enhancing the ergonomics of operators in collaborative tasks.
Remote control of trains will be an intermediary step before reaching full automation. In trains, use cases for remote control have been studied only for the past few years. This research presents a project about remote control for the next generation of trains in France and how we carry out the design of a new teleoperation desk for future remote train drivers. We present an Ergonomic Work Analysis used to precisely understand driver's activity. This analysis allowed us to identify the needs of future drivers and to propose ways to overcome one of the main problems that drivers will face when remotely driving a train: loss and degradation of sense. We explain how innovative technologies developed within the Industry 4.0 can offer solutions to problems faced with remote-control.
Ergonomic efficiency is essential to the mass and prolonged adoption of VR/AR experiences. While VR/AR head-mounted displays unlock users' natural wide-range head movements during viewing, their neck muscle comfort is inevitably compromised by the added hardware weight. Unfortunately, little quantitative knowledge for understanding and addressing such an issue is available so far. Leveraging electromyography devices, we measure, model, and predict VR users' neck muscle contraction levels (MCL) while they move their heads to interact with the virtual environment. Specifically, by learning from collected physiological data, we develop a bio-physically inspired computational model to predict neck MCL under diverse head kinematic states. Beyond quantifying the cumulative MCL of completed head movements, our model can also predict potential MCL requirements with target head poses only. A series of objective evaluations and user studies demonstrate its prediction accuracy and generality, as well as its ability in reducing users' neck discomfort by optimizing the layout of visual targets. We hope this research will motivate new ergonomic-centered designs for VR/AR and interactive graphics
In hybrid industrial environments, workers' comfort and positive perception of safety are essential requirements for successful acceptance and usage of collaborative robots. This paper proposes a novel human-robot interaction framework in which the robot behaviour is adapted online according to the operator's cognitive workload and stress. The method exploits the generation of B-spline trajectories in the joint space and formulation of a multi-objective optimisation problem to online adjust the total execution time and smoothness of the robot trajectories. The former ensures human efficiency and productivity of the workplace, while the latter contributes to safeguarding the user's comfort and cognitive ergonomics. The performance of the proposed framework was evaluated in a typical industrial task. Results demonstrated its capability to enhance the productivity of the human-robot dyad while mitigating the cognitive workload induced in the worker.
JADE is an educational game we have imagined, designed, built, and used successfully in various contexts. This board game enables learning and practicing software ergonomics concepts. It is intended for beginners. We use it every year during several hours with our second-year computer science students at Lyon 1 University. In this paper, we present the classical version of the game, as well as the design and evaluation process that we applied. We also present the hybrid version of JADE, which relies on the use of QR codes and videos. We also present its use in our teaching (with about 850 learners for a total duration of 54 hours, which totals more than 2500 student-hours). We then discuss the results obtained and present the considered evolutions.
The high prevalence of work-related musculoskeletal disorders (WMSDs) could be addressed by optimizing Human-Robot Collaboration (HRC) frameworks for manufacturing applications. In this context, this paper proposes two hypotheses for ergonomically effective task delegation and HRC. The first hypothesis states that it is possible to quantify ergonomically professional tasks using motion data from a reduced set of sensors. Then, the most dangerous tasks can be delegated to a collaborative robot. The second hypothesis is that by including gesture recognition and spatial adaptation, the ergonomics of an HRC scenario can be improved by avoiding needless motions that could expose operators to ergonomic risks and by lowering the physical effort required of operators. An HRC scenario for a television manufacturing process is optimized to test both hypotheses. For the ergonomic evaluation, motion primitives with known ergonomic risks were modeled for their detection in professional tasks and to estimate a risk score based on the European Assembly Worksheet (EAWS). A Deep Learning gesture recognition module trained with egocentric television assembly data was used to complement the collabora
Conjoined collaborative robots, functioning as supernumerary robotic bodies (SRBs), can enhance human load tolerance abilities. However, in tasks involving physical interaction with humans, users may still adopt awkward, non-ergonomic postures, which can lead to discomfort or injury over time. In this paper, we propose a novel control framework that provides kinesthetic feedback to SRB users when a non-ergonomic posture is detected, offering resistance to discourage such behaviors. This approach aims to foster long-term learning of ergonomic habits and promote proper posture during physical interactions. To achieve this, a virtual fixture method is developed, integrated with a continuous, online ergonomic posture assessment framework. Additionally, to improve coordination between the operator and the SRB, which consists of a robotic arm mounted on a floating base, the position of the floating base is adjusted as needed. Experimental results demonstrate the functionality and efficacy of the ergonomics-driven control framework, including two user studies involving practical loco-manipulation tasks with 14 subjects, comparing the proposed framework with a baseline control framework th
This paper introduces a new methodology for real-time prediction of ergonomic and non-ergonomic human poses using volumetric video data in three dimensions. Although the methodology was designed for ergonomic assessments, it can be adapted to other applications requiring real-time analysis of human posture. One aspect that makes this system stand out is its ability to analyze 3D point clouds during the assessment, enabling computation from multiple angles. This overcomes a critical limitation of cameras which provide often a fixed viewpoint, thereby restricting the data available for a thorough postural evaluation, especially when occlusions occur. The system continuously and automatically performs pose inference using the chosen perspective on the real-time streaming data; however, only the poses manually selected and labeled by the user are used to train the personalized deep learning classifier. The methodology has been refined through a case study in which RGB-D cameras captured subjects performing load-lifting tasks, enabling real-time skeletal labeling. The model was trained on this data and, following the training phase, performs inference on new streaming data in real time.
Hand impairment following neurological disorders substantially limits independence in activities of daily living, motivating the development of effective assistive and rehabilitation strategies. Soft robotic gloves have attracted growing interest in this context, yet persistent challenges in customization, ergonomic fit, and user comfort constrain their clinical utility. Here, we present an ergonomic, customizable fabric-based soft robotic glove whose actuators can be tailored to individual finger-joint geometry. The glove comprises five dual-action actuators supporting finger flexion and extension, together with a dedicated thumb abduction actuator. Leveraging computer numerical control heat sealing technology, we fabricated symmetrical-chamber actuators that adopt a concave outer surface upon inflation, thereby increasing finger contact area and improving comfort. Characterization confirmed joint moment and grasping force sufficient for ADL-relevant tasks. In ten healthy subjects, active assistance significantly reduced forearm muscle activity during manipulation, and a pilot study in three individuals with cervical spinal cord injury showed more natural grasp patterns and reduce
This study presents ME-WARD (Multimodal Ergonomic Workplace Assessment and Risk from Data), a novel system for ergonomic assessment and musculoskeletal risk evaluation that implements the Rapid Upper Limb Assessment (RULA) method. ME-WARD is designed to process joint angle data from motion capture systems, including inertial measurement unit (IMU)-based setups, and deep learning human body pose tracking models. The tool's flexibility enables ergonomic risk assessment using any system capable of reliably measuring joint angles, extending the applicability of RULA beyond proprietary setups. To validate its performance, the tool was tested in an industrial setting during the assembly of conveyor belts, which involved high-risk tasks such as inserting rods and pushing conveyor belt components. The experiments leveraged gold standard IMU systems alongside a state-of-the-art monocular 3D pose estimation system. The results confirmed that ME-WARD produces reliable RULA scores that closely align with IMU-derived metrics for flexion-dominated movements and comparable performance with the monocular system, despite limitations in tracking lateral and rotational motions. This work highlights t
Current data-driven floor plan generation methods often reproduce the ergonomic inefficiencies found in real-world training datasets. To address this, we propose a novel approach that integrates architectural design principles directly into a transformer-based generative process. We formulate differentiable loss functions based on established architectural standards from literature to optimize room adjacency and proximity. By guiding the model with these ergonomic priors during training, our method produces layouts with significantly improved livability metrics. Comparative evaluations show that our approach outperforms baselines in ergonomic compliance while maintaining high structural validity.
In virtual reality, it is challenging to achieve satisfactory text entry speed/accuracy, ergonomics, usability, and learnability. To address this issue, we developed ErgoGlide, a novel lightweight and compact wearable device that facilitates text entry tasks in virtual environments. The proposed ErgoGlide can be regarded as a small trackball that is wearable on a user's finger like a ring. By using ErgoGlide with a hive-like virtual keyboard, the user can rotate the ball for key selections, making text entry intuitive and accurate. We conducted three user studies to evaluate ErgoGlide and found that key confirmation techniques have significant effects on text entry speed and the hive-like keyboard design significantly reduced thumb movements. Furthermore, ErgoGlide can significantly improve typing accuracy, ergonomics, and usability over previous text entry methods. Experimental results also indicated that the typing speed of ErgoGlide can be notably improved after training.