共找到 20 条结果
Here we develop a formalism for reversible ionic aggregation kinetics in an example concentrated electrolyte, building on previous equilibrium work of McEldrew and co-workers, and thermoreversible polymers and patchy particle systems. This is achieved through solving a macroscopic rate equation of open/occupied association sites, shown to be a solution of the reversible Smoluchowski aggregation equation, which predicts how ionic associations in electrolytes change subject to a step-change in conditions. We test the derived equations against atomistic molecular dynamics simulations of a salt-in-ionic liquid, where good qualitative agreement is obtained, but quantitative differences are found. This highlights the multiple time scales that exist in concentrated electrolytes, with a fast timescale preceding a longer timescale. We hope this formalism opens new avenues in understanding the dynamics and non-equilibrium behaviour in electrolytes. For example, the formalism can be developed further to investigate the non-Newtonian behaviour of concentrated electrolytes, double layer charging, and the slow dynamics of these electrolytes in confinement.
Water-in-Salt-Electrolytes (WiSEs) are a promising class of next-generation electrolytes. Unlike classical dilute electrolytes or more conventional battery electrolytes, WiSEs are characterised by their super-concentrated salt concentration with only a small amount of water, which gives rise to their expanded electrochemical stability window (ESW). The expansion of the ESW is, in part, due to the formation of an inorganic solid electrolyte interphase (SEI) that passivates the anode; this principle is also important in graphite and Li-metal anodes, and beyond Li-ion technologies. The solvation and ionic associations are key descriptors in understanding the expansion of the ESW. Specifically, as reactions which lead to the SEI (or cathode electrolyte interphase, CEI) must occur at the electrode-electrolyte interface, the distribution of reactants and their various solvation environments are critical. This distribution near the interface is referred to as the electrical double layer (EDL), in the absence of reactions. Here we further develop and analyse a recently proposed thermodynamic theory of hydration and ionic associations in the EDL of WiSEs. We parameterize this theory from bu
Understanding the electrical double layer (EDL), i.e, the distribution of electrolyte at an electrified interface, in concentrated electrolytes is important for various technologies, such as supercapacitors, batteries and electrocatalysis. Atomistic approaches offer unprecedented detail, but are too computationally expensive to exhaustively investigate the EDL of concentrated electrolytes, motivating the development of continuum theories. In these concentrated electrolytes, correlations between ions and solvents are strong, through electrostatic and specific interactions, as well as significant excluded volume effects of the complicated molecular species, making the development of theories challenging. Thus far, there are mainly two distinct \textit{simple} theoretical approaches to understand the EDL of concentrated electrolytes, with account of these correlations beyond mean-field. One is a local-density approximation (LDA) based on treating electrostatic and specific interactions beyond mean-field through the ionic aggregation and solvation; where a simple conceptual understanding can be gained and reasonable agreement with experiments in terms of integrated quantities, but poor
Electrostatic interactions fundamentally govern the structure and transport of electrolytes. In concentrated electrolytes, however, electrostatic and steric correlations, together with ion-solvent coupling, give rise to complex behavior, such as underscreening, that remains challenging to explain despite extensive theoretical effort. Using molecular dynamics simulations of primitive electrolytes with and without space-filling solvent particles, we elucidate the structural and dynamical crossovers and their connection that emerge with increasing salt concentration. Explicit-solvent electrolytes exhibit a screening transition from a charge-dominated dilute regime to a density-dominated concentrated regime, accompanied by dynamical crossovers in ion self-diffusion and ion-pair lifetimes. These dynamical crossovers display a marked discontinuity, unlike the smoother variation of the screening crossover, which originates from short-range ion-counterion structures. The pronounced growth of ionic clusters leads to a percolation transition only at higher concentrations, whereas the onset of the structural and dynamical crossovers is associated primarily with local ion pairing or small aggr
In this review, from crystallographic symmetry to amorphous local polyhedra arrangement and combinations, we examine inorganic solid state electrolytes through the lens of structure property relationships, with oxides, sulfides, and halides representing three major framework chemistries. Halide solid electrolytes and their derivatives, including mixed anion halides and antiperovskite related materials, have expanded this landscape further by introducing new ways to regulate local coordination chemistry, defect populations, and transport active frameworks. Across these families, fast ion conduction depends not simply on composition or crystallographic diffusion pathways, but on the coupled effects of framework topology, site energy distribution, defect chemistry, bottleneck response, and local anion flexibility. Oxides illustrate transport within chemically robust but geometrically constrained frameworks. Sulfides demonstrate that a soft, easily polarizable lattice can broaden the array of low energy migration pathways. Halides occupy an intermediate state, in which the closely packed anion sublattices, an approximately degenerate lithium environment, and mixed anion coordination en
We investigate ion pairing dynamics in electrolytes driven far from equilibrium using molecular simulations and nonequilibrium rate theory. Focusing on 0.5 M $\mathrm{LiPF_6}$ in water and acetonitrile under uniform electric fields, we compute transition path theory observables including reactive fluxes and mean first-passage times of ion pairing. Moreover, we introduce a dynamical proxy of free-ion population, where its field-induced change is strongly correlated with the nonlinear enhancement of conductivity, yielding an increase of $40 \ \%$ at 50 mV/Å in acetonitrile, compared to less than $10 \ \%$ in aqueous electrolytes. Further kinetic analysis elucidates that Onsager's classical theory substantially overestimates field-induced enhancement of ion pair dissociation in molecular electrolytes. This discrepancy arises from solvent-mediated dynamical pathways and field-induced dielectric decrement that suppress ion pair dissociation within explicit solvents, highlighting that a faithful description of molecular details is essential. Our results provide a molecular interpretation of nonlinear electrolyte transport beyond continuum theories and establish a general framework for qu
Modelling the ionic transport in battery cells requires precise parametrization of the involved electrolytes. For carbonate-based electrolytes, however, the evaluation of their parameters suffers from interphase effects between the bulk electrolyte and the Li metal electrode, commonly present in the usual electrochemical polarization experiments. In this work, we combine measurements on conductivity and concentration cells with molecular dynamic simulations, avoiding these difficulties and thus, allowing for a more accurate determination of the parameters. We determine the conductivity, the transference number, the thermodynamic factor and the salt diffusion coefficient for three different electrolytes, i.e mixtures of ethylene carbonate (EC), ethyl methyl carbonate (EMC), methyl propionate (MP), dimethyl carbonate (DMC) and propylene carbonate (PC), containing LiPF$_6$ at various concentrations and temperatures. In order to validate the simulated transference numbers, we employ electrophoretic Nuclear Magnetic Resonance spectroscopy (eNMR).
Lithium-sulfur (Li-S) batteries offer substantial theoretical energy density gains over Li-ion bat-teries, a crucial factor for transportation electrification. In addition, sulfur is an earth-abundant, inexpensive material obtainable from multiple resources; thus, Li-S batteries are envisioned to provide environmentally sustainable solutions to the growing demand for energy storage. A crit-ical roadblock to the realization of commercial Li-S batteries is the formation of polysulfides and their secondary reactions with liquid organic electrolytes, resulting in low coulombic efficiency for charging and fast self-discharge rates. The realization of solid-state electrolytes for Li-S bat-teries provides potential pathways to address the safety concerns of liquid electrolytes and inhib-it the formation of polysulfides and/or prevent their diffusion into the anode electrode. However, current solid-state electrolytes are limited by low ionic conductivity, inadequate electrode inter-facial compatibility, and restricted electrochemical windows. This review discusses the status of polymer-based electrolytes for Li-S batteries, and outlines current methods for their fabrication, their transpor
Due to the hydrolytic instability of $LiPF_6$ in carbonate-based solvents, HF is a typical impurity in Li-ion battery electrolytes. HF significantly influences the performance of Li-ion batteries, for example by impacting the formation of the solid electrolyte interphase at the anode and by affecting transition metal dissolution at the cathode. Additionally, HF complicates studying fundamental interfacial electrochemistry of Li-ion battery electrolytes, such as direct anion reduction, because it is electrocatalytically relatively unstable, resulting in LiF passivation layers. Methods to selectively remove ppm levels of HF from $LiPF_6$-containing carbonate-based electrolytes are limited. We introduce and benchmark a simple yet efficient electrochemical in situ method to selectively remove ppm amounts of HF from $LiPF_6$-containing carbonate-based electrolytes. The basic idea is the application of a suitable potential to a high surface-area metallic electrode upon which only HF reacts (electrocatalytically) while all other electrolyte components are unaffected under the respective conditions.
Extended defects, including exposed surfaces and grain boundaries, are critical to the properties of polycrystalline solid electrolytes in all-solid-state batteries (ASSBs). These defects can significantly alter the mechanical and electronic properties of solid electrolytes, with direct manifestations on the performance of ASSBs. Here, by building a library of 590 surfaces and grain boundaries of 11 relevant solid electrolytes $-$including halides, oxides, and sulfides$-$ their electronic, mechanical, and thermodynamic characteristics are linked to the functional properties of polycrystalline solid electrolytes. It is found that the energy required to mechanically ``separate'' grain boundaries can be significantly lower than in the bulk region of materials, which can trigger preferential cracking of solid electrolyte particles in the grain boundary regions. The brittleness of ceramic solid electrolytes, inferred from the predicted low fracture toughnesses at the grain boundaries, contributes to their cracking under local pressure imparted by Lithium or Sodium penetration in the grain boundaries. Extended defects of solid electrolytes introduce new electronic ``interfacial'' states
When dissolved, weak electrolytes only partially dissociate into ions in a temperature-dependent process. We show herein that such incomplete dissociation yields an enormous thermoelectric response in an electrolyte-filled nanochannel along which a temperature gradient is applied. For this purpose, an extended version of the Nernst-Planck equations is developed that takes into account the temperature-dependent dissociation-association equilibrium. The results indicate that in this way, Seebeck coefficients can be achieved that outperform all previously reported values.
Analytical expressions for the osmotic pressure of electrolytes confined within electrolyte-filled, hollow, charged nanoparticles are studied using contact theorems for cavity nanoshells immersed in a low-concentration electrolyte. Three shell geometries are considered: planar, cylindrical, and spherical. The nanoparticles are modeled as charged cavities of internal radius R and wall thickness d, and are assumed to be at infinite dilution in the surrounding bulk electrolyte. Numerical calculations of the osmotic pressure are presented as a function of several model parameters. For cylindrical and spherical shells, the osmotic pressure exhibits absolute maxima as a function of shell size. This behavior arises from the competition between the violation of the local electroneutrality condition (VLEC) within the shell cavity and the nonlinear profile of the effective electric field. In contrast, the osmotic pressure of the planar (slit-shell) geometry is a monotonic, nonlinear, decreasing function of cavity width. The results are analyzed in terms of the steric and electrostatic (Maxwell stress tensor) contributions appearing in the corresponding contact theorems. Because the analysis
In this paper, building upon the discovery of asymmetric rectified electric fields (AREF) in recent experiments [S.H. Hashemi et al., Physical Review Letters 121, 185504 (2018)], we explore the generation of AREF by applying a sawtooth-like voltage to 1:1 electrolytes with equal diffusion coefficients confined between two planar blocking electrodes. This differs from an earlier approach based on a sinusoidal AC voltage applied to 1:1 electrolytes with unequal diffusion coefficients. By numerically solving the full Poisson-Nernst-Planck equations, we demonstrate that AREF can be generated by a slow rise and a fast drop of the potential (or vice versa), even for electrolytes with equal diffusion coefficients of the cations and anions. We employ an analytically constructed equivalent electric circuit to explain the underlying physical mechanism. Importantly, we find that the strength of AREF can be effectively tuned from zero to its maximal value by only manipulating the time-dependence of the driving voltage, eliminating the necessity to modify the electrolyte composition between experiments. This provides valuable insights to control the manipulation of AREF, which facilitates enhan
Current theories of diffusiophoresis in porous media are limited to a porous medium saturated with a valence symmetric electrolyte. A predictive model for diffusiophoresis in porous media saturated with a valence asymmetric electrolyte, or a general mixture of valence symmetric and asymmetric electrolytes, is lacking. To close this knowledge gap, in this work we develop a mathematical model, based upon the regular perturbation method and numerical integration, to compute the diffusiophoretic mobility of a colloid in porous media saturated with a general mixture of electrolytes. We model the electrokinetics using the Poisson-Nernst-Planck equations and the fluid transport in porous media using the Brinkman equation with an electric body force. We report three novel key findings. First, we demonstrate that, in the same electrolyte concentration gradient, lowering the permeability of the porous medium can significantly weaken the colloid diffusiophoretic motion. Second, we show that, surprisingly, by using a valence asymmetric electrolyte the colloid diffusiophoretic motion in a denser porous medium can be stronger than that in a less dense porous medium saturated with a symmetric ele
The most promising solid electrolytes for all-solid-state Li batteries are oxide and sulfide ceramics. Current ceramic solid electrolytes are brittle and lack the toughness to withstand the mechanical stresses of repeated charge and discharge cycles. Solid electrolytes are susceptible to crack propagation due to dendrite growth from Li metal anodes and to debonding processes at the cathode/electrolyte interface due to cyclic variations in the cathode lattice parameters. In this perspective, we argue that solutions to the mechanics challenges of all-solid-state batteries can be borrowed from the aerospace industry, which successfully overcame similar hurdles in the development of thermal barrier coatings of superalloy turbine blades. Their solution was to exploit ferroelastic and transformation toughening mechanisms to develop ceramics that can withstand cyclic stresses due to large variations in temperature. This perspective describes fundamental materials design principles with which to search for solid electrolytes that are ferroelastically toughened.
Describing analytically the transport properties of electrolytes, such as their conductivity or the self-diffusion of the ions, has been a central challenge of chemical physics for almost a century. In recent years, this question has regained some interest in light of Stochastic Density Field Theory (SDFT) -- an analytical framework that allows the approximate determination of density correlations in fluctuating systems. In spite of the success of this theory to describe dilute electrolytes, its extension to concentrated solutions raises a number of technical difficulties, and requires simplified descriptions of the short-range repulsion between the ions. In this article, we discuss recent approximations that were proposed to compute the conductivity of electrolytes, in particular truncations of Coulomb interactions at short distances. We extend them to another observable (the self-diffusion coefficient of the ions) and compare them to earlier analytical approaches, such as the mean spherical approximation and mode-coupling theory. We show how the treatment of hydrodynamic effects in SDFT can be improved, that the choice of the modified Coulomb interactions significantly affects th
Transference numbers play an important role for understanding the dynamics of electrolytes and assessing their performance in batteries. Unfortunately, these transport parameters are difficult to measure in highly concentrated, liquid electrolytes such as ionic liquids. Also, the interpretation of their sign and magnitude has provoked an ongoing debate in the literature further complicated by the use of different language. In this work, we highlight the role of the reference frame for the interpretation of transport parameters using our novel thermodynamically consistent theory for highly correlated electrolytes. We argue that local volume conservation is a key principle in incompressible liquid electrolytes and use the volume-based drift velocity as reference. We apply our general framework to electrophoretic NMR experiments. For ionic liquid based electrolytes, we find that the results of the eNMR measurements can be best described using this volume-based description. This highlights the limitations of the widely used center-of-mass reference frame which for example forms the basis for molecular dynamics simulations - a standard tool for the theoretical calculation of transport p
We investigate the effect of pectin on the structure and ion transport properties of the room-temperature ionic liquid electrolyte 1-n-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) using molecular dynamics simulations. We find that pectin induces intriguing structural changes in the electrolyte that disrupt large ionic aggregates and promote the formation of smaller ionic clusters, which is a promising finding for ionic conductivity. Due to pectin in [BMIM][PF6] electrolytes, the diffusion coefficient of cations and anions is observed to decrease by a factor of four for a loading of 25 wt. % of pectin in [BMIM][PF6] electrolyte. A strong correlation between the ionic diffusivities (D) and ion-pair relaxation timescales ($τ_C$) is observed such that D~$τ_C^{-0.75}$ for cations and D~$τ_C^{-0.82}$ for anions. The relaxation timescale exponents indicate that the ion transport mechanisms in pectin-[BMIM][PF6] electrolytes are slightly distinct from those found in neat [BMIM][PF6] electrolytes (D~$τ_C^{-1}$). Since pectin marginally affects ionic diffusivities at the gain of smaller ionic aggregates and viscosity, our results suggest that pectin-IL electrolytes offer impro
The thermoelectric response of thermally activated electrolytes (TAE) in a slit channel is studied theoretically and by numerical simulations. The term TAE refers to electrolytes whose charge carrier concentration is a function of temperature, as recently suggested for ionic liquids and highly concentrated aqueous electrolyte solutions. Two competing mechanisms driving charge transport by temperature gradients are identified. For suitable values of the activation energy that governs the generation of charge carriers, a giant thermoelectric response is found, which could help explaining recent experimental results for nanoporous media infiltrated with TAEs.
Activities in aqueous electrolyte solutions, usually described by ionic activity and osmotic coefficients, are important properties for modeling many processes in industry and nature. Established activity models, such as those of Pitzer or Bromley, require fitting to experimental data for each electrolyte of interest and thus cannot predict properties for unstudied systems. While some predictive approaches exist, they are typically limited in scope and rely on additional ion-specific descriptors. In this work, we introduce a new hybrid model that combines the physics-based Bromley model with a matrix completion method (MCM) from machine learning. The MCM is employed to predict the electrolyte-specific parameters of the Bromley model, exploiting the fact that these parameters can be arranged in a matrix with cations and anions as rows and columns, respectively. Due to the lack of experimental data for many electrolytes, the initial parameter matrix is sparsely populated, making the prediction of the Bromley parameters for unstudied electrolytes a matrix completion problem. The hybrid model, Bromley-MCM, was trained end-to-end on experimental data for mean ionic activity coefficients