搜索结果：Ceramics and Composites

Optical ceramics of yttrium aluminum garnet (Y3-xCaxAl4.95Cr0.05O12) doped with 0.1 at.% of chromium ions and 0.5, 0.8, and 1.2 at.% of calcium ions were prepared by reactive sintering in vacuum at 1750 degrees C. The influence of SiO2 and CaO sintering aids on the optical properties and microstructure of Cr,Ca:YAG ceramics was investigated. A decrease in CaO concentration led to a reduction of Cr,Ca:YAG transparency from 81 to 0 percent at 1064 nm; moreover, ceramics with lower CaO content exhibited abnormal grains and high porosity. These features were attributed to interactions between silica and calcium oxide during vacuum sintering. Two mechanisms are proposed to explain the effect of CaO and SiO2 on the formation of Ca,Cr:YAG ceramics. The first involves the formation of a liquid phase due to the CaO-SiO2 interaction during the heating stage, resulting in abnormal grain growth. The second mechanism is the mutual consumption of Si4+ and Ca2+ ions during the isothermal stage of sintering, which leads to a decrease in Cr4+ concentration. Both mechanisms negatively affect the optical and laser properties of the ceramics.

The resent progress in the technology of transparent ceramics extends the application of CW and pulsed lasers. The parameters of the transparent ceramics are comparable with the single crystals both for active elements (Nd:YAG, Yb:YAG, etc.) and passive Q-switchers such as Cr4+:YAG. Despite the reaching of considerable progress, the sintering of Cr4+:YAG remains a challenge up to now. Up to the present the influence of the CaO, MgO and Cr2O3 additives on the sintering process is poorly understander. Moreover, there is an absence of the unified model of Cr4+ ions formations in YAG ceramics. This factor limits the progress in the development of Cr4+:YAG ceramics. This review focused on the influence of the single additives and their combinations on the sintering trajectory of tetravalent chromium - doped YAG ceramics and the Cr4+ ions formation.

Recently, there has been an interest in the incorporation of buckypaper (BP), or carbon nanotube (CNT) membranes, in composite laminates. Research has shown that using BP in contrast to nanotube doped resin enables the introduction of a higher CNT weight fraction which offers multiple benefits including higher piezo resistivity for health monitoring applications and enhanced mechanical response for structural applications. However, their impact on the deformation and failure mechanisms of composite laminates has not been investigated thoroughly. Understanding these issues experimentally would require a carefully executed test plan involving a multitude of design parameters such as BP geometry and placement, material anisotropy and variability, and laminate stacking sequence. This paper presents a deep learning (DL)-based surrogate model for studying the mechanical response of hybrid carbon fiber reinforced polymer (CFRP) composite laminates with BP interleaves under various mechanical loads. The surrogate model utilizes a long short-term memory architecture implemented within a DL framework and predicts the laminate global response for a given configuration, geometry, and loading c

The quest for room-temperature ductile ceramics has been repeatedly fueled by hopes for large-scale applications but so far has been not successful. Recent demonstrations of enhanced functional properties in ceramics through judicious dislocation imprint, however, have been sparking renewed interest in dislocation plasticity in brittle ceramics. Here, we propose a facile approach using room-temperature mechanically seeded mobile dislocations with a density of ~10^14/m^2 to significantly improve the room-temperature plasticity of ceramics with a large plastic strain beyond ~30%. The seeded mobile dislocations trigger profuse dislocation multiplication via cross slip and motion. Hence, they offer an avenue to suppress brittle fracture and harvest plasticity in ceramics without any additional high-temperature process. We employ both in situ nano-/micromechanical deformation and ex situ bulk deformation to bridge the length scales. This finding tackles the pressing bottleneck of dislocation engineering in ceramics for achieving ductile ceramics and harvesting both versatile mechanical and functional properties.

This invited talk will review a series of our recent studies on high-entropy ceramics (HECs) and compositionally complex ceramics (CCCs) and discuss the future perspective. Various single-phase equimolar quinary (five-component) HECs, e.g., MB2, MB, M3B4, MB4, and MB6 borides, MSi2 and M3Si5 silicides, perovskite, fluorite, and pyrochlore oxides, and (intermetallic) aluminides have been fabricated. We further proposed to extend HECs to CCCs to include non-equimolar compositions and further consider short- and long-range orders, which reduce configurational entropies but offer additional dimensions and opportunities to tailor and improve various properties. We also reported the first dual-phase HECs/CCCs. Using compositionally complex fluorite-based oxides (CCFBOs, which can possess fluorite or defect fluorite, pyrochlore, weberite, fergusonite, and bixbyite phases) as the model systems, we have recently discovered long- and short- range orders, composition- and redox-induced order-disorder transitions (ODTs), and ultrahigh-entropy weberite and fergusonite phases in several 10- to 21-component systems.

Wood is one of the main materials used for making musical instruments due to its outstanding acoustical properties. Despite such unique properties, its inferior mechanical properties, moisture sensitivity, and time- and cost-consuming procedure for making instruments in comparison with other materials (e.g., composites) are always considered as its disadvantages in making musical instruments. In this study, the acoustic parameters of three different polyester composites separately reinforced by carbon fiber, glass fiber, and hemp fiber are investigated and are also compared with those obtained for three different types of wood specimens called poplar, walnut, and beech wood, which have been extensively used in making Iranian traditional musical instruments. The acoustical properties such as acoustic coefficient, sound quality factor, and acoustic conversion factor were examined using some non-destructive tests based on longitudinal and flexural free vibration and also forced vibration methods. Furthermore, the water absorption of these polymeric composites was compared with that of the wood samples. The results reveal that the glass fiber-reinforced composites could be used as a su

In this research, Mechanical response and energy absorption of ceramic foam sandwich panels filled with Newtonian and non-Newtonian fluid subjected to quasi-static indentation loads were investigated experimentally. In addition, the effects of number of face-sheet layers (face-sheet thickness) and boundary conditions on the mechanical response and energy absorption of sandwich panels were discussed. Sandwich panels consisted of two glass/epoxy face-sheets with different thicknesses (4 and 8 layers) and an open cell ceramic foam core. This foam saturated with Newtonian (Glycerol) and non-Newtonian (mixture of Ethylene glycol and Aerosil) fluids. Sandwich panels were tested in two different kinds of supporting conditions, simply-supported and fully fixed (clamped). Results showed that damage area in neat composite and STF filled sandwich panels are much higher than the glycerol filled foam core sandwich panels. Also, STF saturated sandwich panels absorbed higher energy compared with two other type of sandwich panels during quasi-static punch shear test.

Composite materials exhibit strongly hierarchical and anisotropic properties governed by coupled mechanisms spanning constituents, plies, laminates, structures, and manufacturing history. This intrinsic complexity makes predictive modeling of composites expensive, because repeated experiments and high-fidelity simulations are needed to cover large design spaces of material, structure, and manufacturing. Multi-fidelity surrogate modeling addresses this challenge by combining abundant, less expensive data with limited high-accuracy data to recover reliable high-fidelity predictions. This review presents a structured overview of multi-fidelity modeling for composite mechanics, covering Gaussian-process or Kriging-based methods, including co-Kriging, coregionalization models, autoregressive formulations, nonlinear autoregressive Gaussian processes, multi-fidelity deep Gaussian processes, and multi-fidelity neural networks. Their distinctions are examined in terms of cross-fidelity correlation, discrepancy representation, uncertainty quantification, and scalability. Selected examples of their applications to composites are introduced according to the roles that multi-fidelity surrogates

Multiferroic composites with the composition (1-x) BaTi0.8Sn0.2O3 - (x) La0.5Ca0.5MnO3 (x =0, 0.3, 0.5, 0.7, 0.9 and 1) were prepared by sol-gel techniques. Rietveld refinements of the composites with 0-3 and 3-0 type connectivities exhibit the formation of pure phases and confirm the fraction of the composite samples. It was found that the composites grain size decreases slightly with increasing the La0.5Ca0.5MnO3 content. Magnetic measurements of the composite ceramics exhibit a gradual increase in saturation and remanent magnetization with increasing La0.5Ca0.5MnO3 content. Dielectric data demonstrate that the composite materials show high values of the dielectric constant in comparison with the parent compound BaTi0.8Sn0.2O3 (BTSO). In addition, an attempt is made to measure the magnetoelectric coupling coefficient and to explain the negative permittivity and losses occurring in these materials at a certain frequency and temperature conditions.

Additive manufacturing of shape memory polymers has gained tremendous interest in recent years due to their versatile potential applications in various industries, such as biomedicine and aerospace. However, the polymers' mechanical properties, specifically stiffness and strength, often hinder their use in mechanically demanding applications, e.g. as structural materials. In this work we produced nacre-inspired composites with a covalent adaptable network, which enables fast and mechanically lossless self-healing, reshaping, and shape memory capabilities. We demonstrate a novel direct write 4D-printing strategy to print smart, nacre-inspired, organic-ceramic composites based on alumina platelets and vitrimers with up to 3.3 and 26.7 times higher tensile strength and stiffness, respectively, in comparison to the pristine vitrimer. To the best of our knowledge, we introduce for the first time a single step 4D-printing process for nacre-inspired composites, that exploits suspension spreading to align micron sized alumina platelets along a common plane, and which utilizes solvent evaporation to induce polycondensation of the monomers resulting in a vinylogous urethane vitrimer after ex

Texture in dense or porous ceramics can enhance their functional and structural properties. Current methods for texturation employ anisotropic particles as starting powders and processes that drive their orientation into specific directions. Using ultra-low magnetic fields combined with slip casting, it is possible to purposely orient magnetically responsive particles in any direction. When those particles are suspended with nanoparticles, templated grain growth occurs during sintering to yield a textured ceramic. Yet, the final grains are usually micrometric, leading weak mechanical properties. Here, we explore how to tune the grain orientation size using magnetic slip casting and templated grain growth. Our strategy consists in changing the size of the anisotropic powders and ensuring that magnetic alignment and densification occurs. The obtained ceramics featured a large range of grain anisotropy, with submicrometric thickness and anisotropic properties. Textured ceramics with tunable grains dimensions and porosity are promising for filtering, biomedical or composite applications.

The incorporation of ceramics into polymers, forming solid composite electrolytes (SCEs) leads to enhanced electrical performance of all-solid-state lithium metal batteries. This is because the dispersed ceramics particles increase the ionic conductivity, while the polymer matrix leads to better contact performance between the electrolyte and the electrode. In this study, we present a model, based on Hybrid Elements Methods, for the time-dependent Li metal and SCE rough interface mechanics, taking into account for the oxide (ceramics) inclusions (using the Equivalent Inclusion method), and the viscoelasticity of the matrix. We study the effect of LLTO particle size, weight concentration, and spatial distribution on the interface mechanical and electrical response. Moreover, considering the viscoelastic spectrum of a real PEO matrix, under a given stack pressure, we investigate the evolution over time of the mechanical and electrical performance of the interface. The presented theoretical/numerical model might be pivotal in tailoring the development of advanced solid state batteries with superior performance; indeed, we found that conditions in the SCE mixture which optimize both th

The joining of ceramics with metals have been extensively used in applications requiring high strength and excellent heat insulation. However, evaluating the residual stress generated inevitably due to the mismatch in coefficients of thermal expansion of ceramic and metal is challenging, which is very important for fabrication and characterization of layered inhomogeneous material. A simplified analytical model considering the overall deformation compatibility is established to compute the interlaminar residual stresses of the ZrO2/(ZrO2+Ni) sandwich ceramics, which agrees well with the results obtained by the commercial finite element package. The effects of the thickness ratio of the transitional layer to the middle layer, and the number of transitional layers on the properties of the ZrO2/(ZrO2+Ni) sandwich ceramics are researched to obtain the optimal structure.

This study aims to shed light on processing pathways towards functional silicate ceramics, which show some promise in various emerging applications, including dielectrics and bioactive implant materials. Polycrystalline silicate ceramics of Neso, Soro and Inosilicate families were synthesised by three different techniques: (i) a co-precipitation method, (ii) a modified sol-gel method and (iii) standard solid-state reactions. Co-precipitated samples show increased sintering and densification behaviour compared to sol-gel and solid-state methods, with diametral shrinkage values during sintering of 28.8%, 13.3% and 25.0%, respectively. Well-controlled phase formation in these ceramics was most readily achieved through the steric entrapment of cations and shorter diffusion pathways afforded by the modified Pechini-type sol-gel method. Substituting Zn2+ for Mg2+ in enstatite samples was found to enhance the formation of orthoenstatite during cooling, which is otherwise very slow. We present guidelines for the design of synthesis methods that consider the requirements for different functional silicate ceramics in terms of phase formation and microstructure.

Fully bioresorbable polymer matrix composites have long been considered as potential orthopaedic implant materials, however their combination of mechanical strength, stiffness, ductility and bioresorbability is also attractive for cardiac stent applications. This work investigated reinforcement of polylactide-based polymers with phosphate glasses, addressing key drawbacks of current polymer stents, and examined the often-neglected evolution of structure and mechanical properties during degradation. Incorporation of 15 - 30wt.% phosphate glass led to modulus increases of up to 80% under simulated body conditions, and 15wt.% glass composites retained comparable ductility to pure polymers, crucial for stent applications where ductility and stiffness are required. Two-stage degradation was observed, dominated by interfacial water absorption and glass dissolution. Polymer embrittlement mechanisms (crystallisation, enthalpy relaxation) were suppressed by glass addition, allowing composites to achieve a more controlled loss of mechanical properties during degradation, which could allow gradual transfer of loading to newly healed tissue. These results provide a valuable new system for unde

Ferroelectric soft mode properties in ceramics and thin films are reviewed and compared with single crystals. In general, the permittivity in ceramics and thin films is markedly reduced compared to the single crystals mainly because of low-permittivity grain boundaries - dead layers - (sometimes also nano-cracks) present in the samples. In SrTiO3 and BaTiO3, this dielectric reduction is fully explained by stiffening of the soft mode frequency. In most other ferroelectrics, the soft mode accounts only partly for such a permittivity reduction, since the transition is only partially driven by the phonon mode softening. In these cases, additional relaxational dispersion below the optical phonon range (central mode) accounts for the main part of the dielectric anomaly near Tc. Influence of nano-cracks on reduced permittivity near Tc and related stiffening of the central mode is manifested in the antiferroelectric PbZrO3 ceramics.

We present a computational framework to explore the effect of microstructure and constituent properties upon the fracture toughness of fibre-reinforced polymer composites. To capture microscopic matrix cracking and fibre-matrix debonding, the framework couples the phase field fracture method and a cohesive zone model in the context of the finite element method. Virtual single-notched three point bending tests are conducted. The actual microstructure of the composite is simulated by an embedded cell in the fracture process zone, while the remaining area is homogenised to be an anisotropic elastic solid. A detailed comparison of the predicted results with experimental observations reveals that it is possible to accurately capture the crack path, interface debonding and load versus displacement response. The sensitivity of the crack growth resistance curve (R-curve) to the matrix fracture toughness and the fibre-matrix interface properties is determined. The influence of porosity upon the R-curve of fibre-reinforced composites is also explored, revealing a stabler response with increasing void volume fraction. These results shed light into microscopic fracture mechanisms and set the b

We present a Gaussian process machine learning model to predict the transformation temperature and lattice parameters of ZrO$_2$-based ceramics. Our overall goal is to search for a shape memory ceramic with a reversible transformation and low hysteresis. The identification of a new low hysteresis composition is based on design criteria that have been successful in metal alloys: (1) $λ_2 = 1$, where $λ_2$ is the middle eigenvalue of the transformation stretch tensor, (2) minimizing the max$|q(f)|$, which measures the deviation from satisfying the cofactor conditions, (3) high transformation temperature, (4) low transformational volume change, and (5) solid solubility. We generate many synthetic compositions, and identify a promising composition, 31.75Zr-37.75Hf-14.5Y-14.5Ta-1.5Er, which closely satisfies all the design criteria based on predictions from machine learning. However, differential thermal analysis reveals a relatively high thermal hysteresis of 137°C for this composition, indicating that the proposed design criteria are not universally applicable to all ZrO$_2$-based ceramics. We also explore reducing tetragonality of the austenite phase by addition of Er$_2$O$_3$. The i

We investigate a composite elastic meta-slab with exceptional transmission properties, particularly the presence of a W-shaped bandgap. A comprehensive study, utilizing experimental measurements, the finite element method, and an analytical approach, identifies this specific bandgap. The meta-slab design involves cutting an array of composite materials arranged in parallel with strategically placed incisions. This configuration ensures that the materials between the slits act as plate-like waveguides within the surrounding medium. The incorporation of steel into ABS-based Fabry-Perot cavities induces a notable coupling effect between longitudinal waves and localized modes traversing the structure, leading to the formation of two distinct Fabry-Perot resonators. These coupling effects generate a series of resonances and antiresonances, ultimately producing the W-band gap through the interaction of two symmetric Fano resonances.