搜索结果：Ceramics

Optical ceramics of yttrium aluminum garnet (Y3-xCaxAl4.95Cr0.05O12) doped with 0.1 at.% of chromium ions and 0.5, 0.8, and 1.2 at.% of calcium ions were prepared by reactive sintering in vacuum at 1750 degrees C. The influence of SiO2 and CaO sintering aids on the optical properties and microstructure of Cr,Ca:YAG ceramics was investigated. A decrease in CaO concentration led to a reduction of Cr,Ca:YAG transparency from 81 to 0 percent at 1064 nm; moreover, ceramics with lower CaO content exhibited abnormal grains and high porosity. These features were attributed to interactions between silica and calcium oxide during vacuum sintering. Two mechanisms are proposed to explain the effect of CaO and SiO2 on the formation of Ca,Cr:YAG ceramics. The first involves the formation of a liquid phase due to the CaO-SiO2 interaction during the heating stage, resulting in abnormal grain growth. The second mechanism is the mutual consumption of Si4+ and Ca2+ ions during the isothermal stage of sintering, which leads to a decrease in Cr4+ concentration. Both mechanisms negatively affect the optical and laser properties of the ceramics.

The resent progress in the technology of transparent ceramics extends the application of CW and pulsed lasers. The parameters of the transparent ceramics are comparable with the single crystals both for active elements (Nd:YAG, Yb:YAG, etc.) and passive Q-switchers such as Cr4+:YAG. Despite the reaching of considerable progress, the sintering of Cr4+:YAG remains a challenge up to now. Up to the present the influence of the CaO, MgO and Cr2O3 additives on the sintering process is poorly understander. Moreover, there is an absence of the unified model of Cr4+ ions formations in YAG ceramics. This factor limits the progress in the development of Cr4+:YAG ceramics. This review focused on the influence of the single additives and their combinations on the sintering trajectory of tetravalent chromium - doped YAG ceramics and the Cr4+ ions formation.

Dislocation-mediated plastic deformation in ceramic materials has sparked renewed research interest due to the technological potential of dislocations. Despite the long research history of dislocations as one-dimensional lattice defects in crystalline solids, the understanding of plastically deformable ceramics at room temperature seems lacking. The conventional view holds that ceramics are brittle, difficult to deform at room temperature and exhibit no dislocation plasticity except in small-scale testing such as nanoindentation and nano-micropillar compression. In this review, we attempt to gather the evidence and reports of room-temperature dislocation plasticity in ceramics beyond the nano-/microscale, with a focus on meso-macroscale plasticity. First, we present a mechanical deformation toolbox covering various experimental approaches for assessing the dislocation plasticity, with a focus on bulk plasticity. Second, we provide a materials toolbox listing 44 ceramic compounds that have been reported to exhibit dislocation plasticity at meso-/macroscale under ambient conditions. Finally, we discuss the mechanics of dislocations in ceramics, aiming to establish a foundation for pr

The quest for room-temperature ductile ceramics has been repeatedly fueled by hopes for large-scale applications but so far has been not successful. Recent demonstrations of enhanced functional properties in ceramics through judicious dislocation imprint, however, have been sparking renewed interest in dislocation plasticity in brittle ceramics. Here, we propose a facile approach using room-temperature mechanically seeded mobile dislocations with a density of ~10^14/m^2 to significantly improve the room-temperature plasticity of ceramics with a large plastic strain beyond ~30%. The seeded mobile dislocations trigger profuse dislocation multiplication via cross slip and motion. Hence, they offer an avenue to suppress brittle fracture and harvest plasticity in ceramics without any additional high-temperature process. We employ both in situ nano-/micromechanical deformation and ex situ bulk deformation to bridge the length scales. This finding tackles the pressing bottleneck of dislocation engineering in ceramics for achieving ductile ceramics and harvesting both versatile mechanical and functional properties.

The growing number of ceramics exhibiting bulk plasticity at room temperature has renewed interest in revisiting plastic deformation and dislocation-mediated mechanical and functional properties in these materials. In this work, a data-driven approach is employed to identify the key parameters governing room-temperature bulk plasticity in ceramics. The model integrates an existing dataset of 55 ceramic materials, 38 plastically deformable and 17 brittle, and achieves accurate classification of bulk plasticity. The analysis reveals several key parameters essential for predicting bulk plasticity: i) Poisson's ratio and Pugh's ratio as macroscopic indicators reflecting the balance between shear and volumetric deformation resistance, and ii) Burgers vector, crystal structure and melting temperature as crystallographic descriptors associated with lattice geometry, slip resistance and thermal stability, and iii) Bader charge as a microscopic measure of bonding character. Together, these parameters define a multiscale descriptor space linking intrinsic materials properties to bulk room-temperature plasticity in ceramics, bridging the gap between empirical ductility criteria and atomistic

Dislocations in ceramics have enjoyed a long yet underappreciated research history. This brief historical overview and reflection on the current challenges provides new insights into using this line defect as a rediscovered tool for engineering functional ceramics.

Oxide Y2.5Nd0.5Al5O12 (YAG:Nd) with garnet structure was synthesized in the powder and ceramics forms. Fine-grained YAG:Nd ceramics with a relative density of ~99% were obtained by the Spark Plasma Sintering method (SPS). The radiation resistance of ceramics was studied under irradiation with swift Xe-ions (E = 146 MeV). A gradient defect structure is formed in irradiated ceramics, varying from layer to layer. The strained YAG phase formed as a result of Xe ions irradiation is localized in a near-surface layer with a thickness of ~5 μm. Full amorphization of the samples was observed under irradiation with a fluence of 1x10^13 cm-2. The calculated critical fluence was 6.5x10^12 cm-2, which corresponded to 0.03 dpa. The microhardness of the surface layers of irradiated ceramics is less than the central layers, and, in general, decreases with increasing ion fluence.

Compositionally complex materials have demonstrated extraordinary promise for structural robustness in extreme environments. Of these, the most commonly thought of are high entropy alloys, where chemical complexity grants uncommon combinations of hardness, ductility, and thermal resilience. In contrast to these metal-metal bonded systems, the addition of ionic and covalent bonding has led to the discovery of high entropy ceramics. These materials also possess outstanding structural, thermal, and chemical robustness but with a far greater variety of functional properties which enable access to continuously controllable magnetic, electronic, and optical phenomena. In this perspective, we outline the potential for high entropy ceramics in functional applications under extreme environments, where intrinsic stability may provide a new path toward inherently hardened device design. Current works on high entropy carbides, actinide bearing ceramics, and high entropy oxides are reviewed in the areas of radiation, high temperature, and corrosion tolerance where the role of local disorder is shown to create pathways toward self-healing and structural robustness. In this context, new strategie

Balaton Borders translates ecological data from Lake Balaton into ceramic tableware that represents human impact on the landscape, from reedbed reduction to shoreline modification and land erosion. Designed for performative dining, the pieces turn shared meals into multisensory encounters where food and data ceramics spark collective reflection on ecological disruption.

Potassium tantalate (KTaO$_{3}$) is a promising material for dielectric applications at low temperature. However, dense and single-phase ceramics cannot be obtained by conventional sintering because of the evaporation of potassium that leads to secondary phases. Here, we demonstrate that spark plasma sintering is a suitable method to obtain dense and single-phase KTaO$_{3}$ ceramics, by optimizing three parameters: initial composition, temperature, and pressure. A 2 mol% K-excess in the precursors leads to a large grain growth and dense single-phase ceramics. Without K-excess, a small amount of secondary phase (K$_{6}$Ta$_{10.8}$O$_{30}$) is observed at the surface but can be removed by polishing. At 10 K, the dielectric permittivity is 4 times higher in the ceramic from the 2 mol% K-excess powder, because of the larger grain size. The thermal conductivity decreases with decreasing grain size and stays above the thermal conductivity of KNbO$_{3}$ ceramics.

This article introduces an artistic research project that utilises artist-in-residency and exhibition as methods for exploring the possibilities of robotic 3D printing and ceramics. The interdisciplinary project unites artists and architects to collaborate on a proposed curatorial concept and Do-It-With-Others (DIWO) technological development. Constraints include material, specifically local clay, production technique, namely 3D printing with a robotic arm, and kiln size, as well as an exhibition concept that is further elaborated in the next chapter. The pictorial presents four projects as case studies demonstrating how the creatives integrate these constraints into their processes. This integration leads to the subsequent refinement and customization of the robotic-ceramics interface, aligning with the practitioners' requirements through software development. The project's focus extends beyond artistic outcomes, aiming also to advance the pipeline of 3D robotic printing in clay, employing a digitally controlled material press that has been developed in-house, with its functionality refined through practice.

This study aims to shed light on processing pathways towards functional silicate ceramics, which show some promise in various emerging applications, including dielectrics and bioactive implant materials. Polycrystalline silicate ceramics of Neso, Soro and Inosilicate families were synthesised by three different techniques: (i) a co-precipitation method, (ii) a modified sol-gel method and (iii) standard solid-state reactions. Co-precipitated samples show increased sintering and densification behaviour compared to sol-gel and solid-state methods, with diametral shrinkage values during sintering of 28.8%, 13.3% and 25.0%, respectively. Well-controlled phase formation in these ceramics was most readily achieved through the steric entrapment of cations and shorter diffusion pathways afforded by the modified Pechini-type sol-gel method. Substituting Zn2+ for Mg2+ in enstatite samples was found to enhance the formation of orthoenstatite during cooling, which is otherwise very slow. We present guidelines for the design of synthesis methods that consider the requirements for different functional silicate ceramics in terms of phase formation and microstructure.

The potential utilization of two-stage sintering for the production of highly dense and pure nickel diniobate (Ni4Nb2O9) ceramics with low firing temperature was demonstrated. Effects of designed sintering conditions on phase formation, densification and microstructure of the ceramics were characterized by X-ray diffraction (XRD), Archimedes method and scanning electron microscopy (SEM), respectively. It has been found that minor phase of columbite NiNb2O6 tended to form together with the desired Ni4Nb2O9 phase, depending on sintering conditions. The optimization of sintering conditions could lead to a single-phase Ni4Nb2O9 ceramics with orthorhombic structure. The ceramics doubly sintered at 950/1250 °C for 4 h exhibited maximum density value of 92%. Microstructures with denser angular grain-packing were generally found in both sets of the sintered Ni4Nb2O9 ceramics. However, the grains were irregular in shape when the samples are sintered at 1050/1250 °C. Two-stage sintering was also found to enhance ferroelectric behavior of Ni4Nb2O9 ceramic.

ZnO-based scintillation ceramics for application in HENPA LENPA analyzers have been investigated. The following ceramic samples have been prepared: undoped ones (ZnO), an excess of zinc in stoichiometry (ZnO:Zn), doped with gallium (ZnO:Ga) and lithium (ZnO:Li). Optical transmission, x-ray excited emission, scintillation decay and pulse height spectra were measured and analyzed. Ceramics have reasonable transparency in visible range (up to 60% for 0.4 mm thickness) and energy resolution (14.9% at 662 keV Cs137 gamma excitation). Undoped ZnO shows slow (1.6 μs) luminescence with maximum at 2.37 eV and light yield about 57% of CsI:Tl. ZnO:Ga ceramics show relatively low light yield with ultra fast decay time (1 ns). Lithium doped ceramics ZnO:Li have better decay time than undoped ZnO with fair light yield. ZnO:Li ceramics show good characteristics under alpha-particle excitation and can be applied for the neutral particle analyzers.

PbFe12O19 (PFO) powders in hexagonal structure have been synthesized by sol-gel process using lead acetate, glycerin and ferric acetylacetonate as the precursor. PbFe12O19 ceramics were obtained by sintering the PbFe12O19 powders at 1000\degree C for 1 hour. Distorted flaky hexahedron grains are frequently observed in the SEM images of sintered PbFe12O19 ceramics. Large spontaneous polarization was observed in PbFe12O19 ceramic at room temperature, exhibiting a clear ferroelectric hysteresis loop. The remnant polarization of PbFe12O19 ceramic is estimated to be Pr~21μC/cm2. The distortion of hexahedron grains as well as the Fe oxygen octahedron in its perovskite-like hexagonal unit cell is proposed to be the origin of polarization in PbFe12O19 ceramics. Meanwhile, PbFe12O19 ceramics demonstrate strong ferromagnetism at room temperature. Simultaneous occurrence of large ferroelectricity and strong ferromagnetism in PbFe12O19 ceramics holds promise for its application in new generation of electronic devices as a practical multiferroic candidate in single phase.

Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramics have demonstrated excellent dielectric, ferroelectric and piezoelectric properties in comparison to lead-based materials. The synthesis of pure and crystalline BCZT nanopowders at low temperatures of 25, 80 and 160 C was reported previously by using a sol-gel method followed by a hydrothermal route. In this study, the structural, dielectric and ferroelectric properties of sintered BCZT ceramics at 1250 °C for 10h were investigated. XRD measurements revealed the presence of a single perovskite phase at room temperature with the coexistence of the orthorhombic and tetragonal symmetries. The increase of grain size and the ceramic density in BCZT ceramics result in an enhancement of the dielectric and ferroelectric properties of BCZT ceramics. More interestingly, the synthesis temperature of BCZT powders with high dielectric and ferroelectric properties could be decreased to a low temperature of 160 °C, which is about 1200 °C lower when compared with solid-state reaction and 840 °C lower when compared with sol-gel methods. The BCZT ceramics elaborated at 160 °C revealed excellent electrical properties. Hence, the use of low-temperatu

We report here the realization of ferroelectricity, ferromagnetism and magnetocapacitance effect in SrFe12O19 ceramics at room temperature. The ceramics demonstrate a saturated polarization hysteresis loop, two I-V peaks and large anomaly of dielectric constant near Curie temperature. These evidences confirmed the ferroelectricity of SrFe12O19 ceramics after annealing in O2 atmosphere. The remnant polarization of the SrFe12O19 ceramic is 103 μC/cm2. The material also exhibits strong ferromagnetic characterization, the coercive field and remnant magnetic moment are 6192Oe and 35.8emu/g, respectively. Subsequent annealing SrFe12O19 ceramics in O2 not only reveals its innate ferroelectricity but also improves the ferromagnetic properties through transforming Fe2+ into Fe3+. By applying a magnetic field, the capacitance demonstrates remarkable change along with B field, the maximum relative change of dielectric constant is 1174%, which reflects a giant magnetocapacitance effect in SrFe12O19. These combined functional responses in SrFe12O19 ceramics opens substantial possibilities for applications in novel electric devices.

This invited talk will review a series of our recent studies on high-entropy ceramics (HECs) and compositionally complex ceramics (CCCs) and discuss the future perspective. Various single-phase equimolar quinary (five-component) HECs, e.g., MB2, MB, M3B4, MB4, and MB6 borides, MSi2 and M3Si5 silicides, perovskite, fluorite, and pyrochlore oxides, and (intermetallic) aluminides have been fabricated. We further proposed to extend HECs to CCCs to include non-equimolar compositions and further consider short- and long-range orders, which reduce configurational entropies but offer additional dimensions and opportunities to tailor and improve various properties. We also reported the first dual-phase HECs/CCCs. Using compositionally complex fluorite-based oxides (CCFBOs, which can possess fluorite or defect fluorite, pyrochlore, weberite, fergusonite, and bixbyite phases) as the model systems, we have recently discovered long- and short- range orders, composition- and redox-induced order-disorder transitions (ODTs), and ultrahigh-entropy weberite and fergusonite phases in several 10- to 21-component systems.