Wilson coefficients in dimension-six effective field theory are constrained in a combined fit to several ATLAS measurements. These inputs probe Higgs-boson processes across multiple production and decay modes, di-Higgs signatures in the $b\bar{b}γγ$ and $b\bar{b}ττ$ final states, $WW$ and $WZ$ diboson signatures, electroweak $Zjj$ final states, high-mass Drell-Yan interactions, and $t \bar t$ events in both resolved and boosted topologies. Precision electroweak observables from LEP, SLD, and ATLAS are also included. A total of 48 parameters, including individual Wilson coefficients in the Warsaw basis and linear combinations of Wilson coefficients, are constrained simultaneously. Constraints on two-Higgs-doublet models and heavy-vector-boson models are also obtained by matching a relevant sub-set of the results with their parameters. This combined fit provides the most comprehensive effective field theory interpretation of experimental data by the ATLAS Collaboration to date. No significant deviations from the Standard Model are observed.
The ATLAS Collaboration at CERN's Large Hadron Collider is at the forefront of particle physics research and is equally committed to bridging the gap between cutting-edge science and the wider public. Since 2010, the ATLAS Virtual Visits programme has provided live, interactive tours of the ATLAS detector and control room to global audiences in their language, without the need to travel. The programme has grown significantly since its inception, as demonstrated by quantitative data collected since January 2019 and case studies of large-scale implementations in Brazil and Greece. The impact on individual participants is also discussed.
Charged-particle reconstruction is a fundamental part of the event reconstruction in modern multi-purpose high-energy physics detectors. This paper describes the algorithms used to reconstruct charged particles and primary vertices with the ATLAS Inner Detector. The most recent software configuration deployed for data-taking is described, and the performance obtained when this software is used to process Run 2 (2015-2018) data, a subset (from 2022) of Run 3 (2022-2026) data, and corresponding simulated data is presented. The ATLAS track and vertex reconstruction performance is shown for up to 80 simultaneous proton-proton interaction. It maintains a high efficiency, good resolution for key parameters, and low rates of mis-reconstructed candidates for Run 2 and Run 3 conditions.
After ten years of operation at the LHC, the planar pixel sensors of the innermost barrel layer of the ATLAS Pixel detector have accumulated an average bulk damage fluence in excess of $2\times10^{15}$ 1 MeV-neutrons equivalent/cm$^2$. The macroscopic effects of this radiation are an increase of the sensor leakage current, a loss of charge collection efficiency and an increase of the depletion voltage. Using regular bias voltage scans performed at the beginning and end of each data taking campaign the evolution of the pixel cluster charge and bulk depletion is studied as a function of particle fluence. Results are interpreted with the modelling provided by standalone TCAD and ATLAS Monte Carlo simulation including radiation damage effects. The dependence of the collected charge and the depletion voltage with integrated luminosity are studied through the full period of operation.
Inelastic beam-gas collisions at the Large Hadron Collider (LHC), within a few hundred metres of the ATLAS experiment, are known to give the dominant contribution to beam backgrounds. These are monitored by ATLAS with a dedicated Beam Conditions Monitor (BCM) and with the rate of fake jets in the calorimeters. These two methods are complementary since the BCM probes backgrounds just around the beam pipe while fake jets are observed at radii of up to several metres. In order to quantify the correlation between the residual gas density in the LHC beam vacuum and the experimental backgrounds recorded by ATLAS, several dedicated tests were performed during LHC Run 2. Local pressure bumps, with a gas density several orders of magnitude higher than during normal operation, were introduced at different locations. The changes of beam-related backgrounds, seen in ATLAS, are correlated with the local pressure variation. In addition the rates of beam-gas events are estimated from the pressure measurements and pressure bump profiles obtained from calculations. Using these rates, the efficiency of the ATLAS beam background monitors to detect beam-gas events is derived as a function of distance
The ATLAS Google Project was established as part of an ongoing evaluation of the use of commercial clouds by the ATLAS Collaboration, in anticipation of the potential future adoption of such resources by WLCG grid sites to fulfil or complement their computing pledges. Seamless integration of Google cloud resources into the worldwide ATLAS distributed computing infrastructure was achieved at large scale and for an extended period of time, and hence cloud resources are shown to be an effective mechanism to provide additional, flexible computing capacity to ATLAS. For the first time a total cost of ownership analysis has been performed, to identify the dominant cost drivers and explore effective mechanisms for cost control. Network usage significantly impacts the costs of certain ATLAS workflows, underscoring the importance of implementing such mechanisms. Resource bursting has been successfully demonstrated, whilst exposing the true cost of this type of activity. A follow-up to the project is underway to investigate methods for improving the integration of cloud resources in data-intensive distributed computing environments and reducing costs related to network connectivity, which re
A calibration of the ATLAS flavour-tagging algorithms using a new calibration procedure based on optimal transportation maps is presented. Simultaneous, continuous corrections to the $b$-jet, $c$-jet, and light-flavour jet classification probabilities from jet-tagging algorithms in simulation are derived for $b$-jets using $t\bar t \to eμννbb$ data. After application of the derived calibration maps, closure between simulation and observation is achieved for jet flavour observables used in ATLAS analyses of Large Hadron Collider (LHC) Run 2 proton-proton collision data. This continuous calibration opens up new possibilities for the future use of jet flavour information in LHC analyses and also serves as a guide for deriving high-dimensional corrections to simulation via transportation maps, an important development for a broad range of inference tasks.
During the 2015-2018 data-taking period, the Large Hadron Collider delivered proton-proton bunch crossings at a centre-of-mass energy of 13 TeV to the ATLAS experiment at a rate of roughly 30 MHz, where each bunch crossing contained an average of 34 independent inelastic proton-proton collisions. The ATLAS trigger system selected roughly 1 kHz of these bunch crossings to be recorded to disk. Offline algorithms then identify one of the recorded collisions as the collision of interest for subsequent data analysis, and the remaining collisions are referred to as pile-up. Pile-up collisions represent a trigger-unbiased dataset, which is evaluated to have an integrated luminosity of 1.33 pb$^{-1}$ in 2015-2018. This is small compared with the normal trigger-based ATLAS dataset, but when combined with vertex-by-vertex jet reconstruction it provides up to 50 times more dijet events than the conventional single-jet-trigger-based approach, and does so without adding any additional cost or requirements on the trigger system, readout, or storage. The pile-up dataset is validated through comparisons with a special trigger-unbiased dataset recorded by ATLAS, and its utility is demonstrated by m
ATLAS, a general-purpose experiment at the Large Hadron Collider (LHC), makes use of a large internationally-distributed computing infrastructure, including over $10^6$ TB of managed data on disk and tape and almost one million simultaneously running CPU cores. Upgrades for the High-Luminosity LHC (HL-LHC) will increase the required computing resources by a factor of 3-4 by the beginning of the 2030s, and by an order of magnitude before the conclusion of data taking at the beginning of the 2040s. These resources are spread over around 100 computing sites worldwide. Efforts are underway within the experiment to evaluate and mitigate various aspects of the environmental impact of the sites, with the additional long-term goal of making recommendations to the sites that will significantly reduce the total expected environmental impact in the HL-LHC era. These efforts take several forms: building awareness in the experiment community, adjusting aspects of the computing policy, and modifications of data center configurations, either in ways that take advantage of particular features of ATLAS workloads or in generic ways that reduce the environmental impact of the computing resources. Thi
The high-luminosity phase of LHC operations (HL-LHC), will feature a large increase in simultaneous proton-proton interactions per bunch crossing up to 200, compared with a typical leveling target of 64 in Run 3. Such an increase will create a very challenging environment in which to perform charged particle trajectory reconstruction, a task crucial for the success of the ATLAS physics program, and will exceed the capabilities of the current ATLAS Inner Detector (ID). A new all-silicon Inner Tracker (ITk) will replace the current ID in time for the start of the HL-LHC. To ensure successful use of the ITk capabilities in Run 4 and beyond, the ATLAS tracking software has been successfully adapted to achieve state-of-the-art track reconstruction in challenging high-luminosity conditions with the ITk detector. This paper presents the expected tracking performance of the ATLAS ITk based on the latest available developments since the ITk technical design reports.
The Higgs boson was discovered by the ATLAS and CMS Collaborations in 2012 using data from Run 1 of the Large Hadron Collider (2010$-$2012). In Run 2 (2015$-$2018), about 140 fb$^{-1}$ of proton$-$proton collisions at a centre-of-mass energy of 13 TeV were collected by the ATLAS experiment. This review presents the most important Run 2 results obtained by the ATLAS Collaboration regarding the properties of the Higgs boson and its interactions with other particles. The performed studies significantly enhance the understanding of the Higgs boson, while hunting for deviations from the predictions of the Standard Model of particle physics.
A search for the dimuon decay of the Higgs boson is presented based on pp collision data recorded by ATLAS during Run 3 of the Large Hadron Collider, corresponding to an integrated luminosity of 165 fb$^{-1}$ at $\sqrt{s} = 13.6$ TeV. To enhance the sensitivity, the results are combined with those from Run 2. An excess of events over the background is observed with a significance of $3.4 σ$ ($2.5 σ$ expected). The best-fit signal strength is $μ= 1.4\pm0.4$. This result provides evidence for the $H \to μμ$ decay with ATLAS data and offers a direct probe of the Higgs-boson Yukawa coupling to second-generation fermions.
A summary of the constraints from searches performed by the ATLAS Collaboration for the electroweak production of charginos and neutralinos is presented. Results from eight separate ATLAS searches are considered, each using 140 fb$^{-1}$ of proton-proton data at a centre-of-mass energy of $\sqrt{s}$=13 TeV collected at the Large Hadron Collider during its second data-taking run. The results are interpreted in the context of the 19-parameter phenomenological minimal supersymmetric standard model, where R-parity conservation is assumed and the lightest supersymmetric particle is assumed to be the lightest neutralino. Constraints from previous electroweak, flavour and dark matter related measurements are also considered. The results are presented in terms of constraints on supersymmetric particle masses and are compared with limits from simplified models. Also shown is the impact of ATLAS searches on parameters such as the dark matter relic density and the spin-dependent and spin-independent scattering cross-sections targeted by direct dark matter detection experiments. The Higgs boson and Z boson `funnel regions', where a low-mass neutralino would not oversaturate the dark matter rel
We present performance studies of the Time-of-Flight (ToF) subdetector of the ATLAS Forward Proton (AFP) detector at the LHC. Efficiencies and resolutions are measured using high-statistics data samples collected at low and moderate pile-up in 2017, the first year when the detectors were installed on both sides of the interaction region. While low efficiencies are observed, of the order of a few percent, the resolutions of the two ToF detectors measured individually are 21 ps and 28 ps, yielding an expected resolution of the longitudinal position of the interaction, $z_{vtx}$, in the central ATLAS detector of $5.3 \pm 0.6$ mm. This is in agreement with the observed width of the distribution of the difference between $z_{vtx}$ measured independently by the central ATLAS tracker and by the ToF detector, of $6.0 \pm 2.0$ mm.
The ATLAS trigger system is a crucial component of the ATLAS experiment at the LHC. It is responsible for selecting events in line with the ATLAS physics programme. This paper presents an overview of the changes to the trigger and data acquisition system during the second long shutdown of the LHC, and shows the performance of the trigger system and its components in the proton-proton collisions during the 2022 commissioning period as well as its expected performance in proton-proton and heavy-ion collisions for the remainder of the third LHC data-taking period (2022-2025).
This paper presents a new $τ$-lepton reconstruction and identification procedure at the ATLAS detector at the Large Hadron Collider, which leads to significantly improved performance in the case of physics processes where a highly boosted pair of $τ$-leptons is produced and one $τ$-lepton decays into a muon and two neutrinos ($τ_μ$), and the other decays into hadrons and one neutrino ($τ_{had}$). By removing the muon information from the signals used for reconstruction and identification of the $τ_{had}$ candidate in the boosted pair, the efficiency is raised to the level expected for an isolated $τ_{had}$. The new procedure is validated by selecting a sample of highly boosted $Z\rightarrowτ_μτ_{had}$ candidates from the data sample of $140$ ${fb}^{-1}$ of proton-proton collisions at $13$ TeV recorded with the ATLAS detector. Good agreement is found between data and simulation predictions in both the $Z\rightarrowτ_μτ_{had}$ signal region and in a background validation region. The results presented in this paper demonstrate the effectiveness of the $τ_{had}$ reconstruction with muon removal in enhancing the signal sensitivity of the boosted $τ_μτ_{had}$ channel at the ATLAS detecto
The ATLAS tile calorimeter (TileCal) is the hadronic sampling calorimeter covering the central region of the ATLAS detector at the Large Hadron Collider (LHC). This paper gives an overview of the calorimeter's operation and performance during the years 2015-2018 (Run 2). In this period, ATLAS collected proton-proton collision data at a centre-of-mass energy of 13 TeV and the TileCal was $99.65\%$ efficient for data-taking. The signal reconstruction, the calibration procedures, and the detector operational status are presented. The performance of two ATLAS trigger systems making use of TileCal information, the minimum-bias trigger scintillators and the tile muon trigger, is discussed. Studies of radiation effects allow the degradation of the output signals at the end of the LHC and HL-LHC operations to be estimated. Finally, the TileCal response to isolated muons, hadrons and jets from proton-proton collisions is presented. The energy and time calibration methods performed excellently, resulting in good stability and uniformity of the calorimeter response during Run 2. The setting of the energy scale was performed with an uncertainty of $2\%$. The results demonstrate that the perfor
The search for supersymmetry with the ATLAS experiment at the CERN Large Hadron Collider intensified after the discovery of the Higgs boson in 2012. The search programme expanded in both breadth and depth, profiting from the increased integrated luminosity and higher centre-of-mass energy of Run 2, and gaining new sensitivity to unexplored areas of supersymmetry parameter space through the use of new experimental signatures and innovative analysis techniques. This report summarises the supersymmetry searches at ATLAS using up to 140 fb$^{-1}$ of $pp$ collisions at $\sqrt{s} = 13$ TeV, including the limits set on the production of gluinos, squarks, and electroweakinos for scenarios either with or without R-parity conservation, and including models where some of the supersymmetric particles are long-lived.
Searches for long-lived particles (LLPs) are among the most promising avenues for discovering physics beyond the Standard Model at the Large Hadron Collider (LHC). However, displaced signatures are notoriously difficult to identify due to their ability to evade standard object reconstruction strategies. In particular, the default ATLAS track reconstruction applies strict pointing requirements which limit sensitivity to charged particles originating far from the primary interaction point. To recover efficiency for LLPs decaying within the tracking detector volume, the ATLAS Collaboration employs a dedicated large-radius tracking (LRT) pass with loosened pointing requirements. During Run 2 of the LHC, the LRT implementation produced many incorrectly reconstructed tracks and was therefore only deployed in small subsets of events. In preparation for LHC Run 3, ATLAS has significantly improved both standard and large-radius track reconstruction performance, allowing for LRT to run in all events. This development greatly expands the potential phase-space of LLP searches and streamlines LLP analysis workflows. This paper will highlight the above achievement and report on the readiness of
The ATLAS experiment relies on real-time hadronic jet reconstruction and $b$-tagging to record fully hadronic events containing $b$-jets. These algorithms require track reconstruction, which is computationally expensive and could overwhelm the high-level-trigger farm, even at the reduced event rate that passes the ATLAS first stage hardware-based trigger. In LHC Run 3, ATLAS has mitigated these computational demands by introducing a fast neural-network-based $b$-tagger, which acts as a low-precision filter using input from hadronic jets and tracks. It runs after a hardware trigger and before the remaining high-level-trigger reconstruction. This design relies on the negligible cost of neural-network inference as compared to track reconstruction, and the cost reduction from limiting tracking to specific regions of the detector. In the case of Standard Model $HH \rightarrow b\bar{b}b\bar{b}$, a key signature relying on $b$-jet triggers, the filter lowers the input rate to the remaining high-level trigger by a factor of five at the small cost of reducing the overall signal efficiency by roughly 2%.