搜索结果：Alloys

La-Mg-Ni-based alloys are promising negative electrode materials for 3rd generation of Ni-MH$_x$ batteries. In this work, we investigate the effect of Mg substitution on the electrochemical and electronic properties of La$_{2-x}$Mg$_x$Ni$_7$ materials. The mechanical alloying technique is used to produce a series of La$_{2-x}$Mg$_x$Ni$_7$ alloys ($x$ = 0.00, 0.25, 0.50 and 0.75). The X-ray diffraction measurements indicate multiphase character of the samples with majority (La,Mg)$_2$Ni$_7$ phases of hexagonal Ce$_2$Ni$_7$-type and rhombohedral Gd$_2$Co$_7$-type. Electrochemical measurements show how the maximum discharge capacity ($C_{max}$) increases with Mg concentration and that reach the highest value of 304 mAh/g for La$_{1.5}$Mg$_{0.5}$Ni$_7$ ($x$ = 0.5). The experimental efforts are followed by the density functional theory (DFT) calculations performed with the full-potential local-orbital minimum-basis scheme (FPLO). To simulate chemical disorder, we use the coherent potential approximation (CPA). The calculations are focused on the La$_{1.5}$Mg$_{0.5}$Ni$_7$ composition with the highest measured value of $C_{max}$. Additionally, several other structures are considered as r

The structure of evaporated amorphous Ge$_x$Sb$_x$Te$_{100-2x}$ ($x =$ 6, 9, 13) alloys was investigated by neutron diffraction, X-ray diffraction and extended X-ray absorption spectroscopy (EXAFS) at the Ge, Sb and Te K-edges. Large scale structural models were generated by fitting the experimental datasets (5 for each composition) simultaneously in the framework of the reverse Monte Carlo simulation technique. It was found that the alloys are chemically ordered (Ge and Sb have predominantly Te neighbors) and within the experimental uncertainty each component satisfies the $8-N$ rule. A comparison with the pair correlation functions of melt quenched Ge$_{20}$Te$_{80}$ revealed that the first minimum of $g_{\mathrm{TeTe}}(r)$ is shallower in the ternary alloys than in Ge$_{20}$Te$_{80}$. On the other hand, the separation of the first and second coordination environments of Ge atoms is stronger in the Ge-Sb-Te alloys investigated.

In this work, we investigate the effect of Gd and Co substitutions on the electrochemical and electronic properties of La$_{1.5}$Mg$_{0.5}$Ni$_7$ alloy. Two series of La$_{1.5-x}$Gd$_x$Mg$_{0.5}$Ni$_7$ ($x$ = 0.0, 0.25, 1.0) and La$_{1.5}$Mg$_{0.5}$Ni$_{7-y}$Co$_y$ ($y$ = 0.0, 0.5, 1.5) alloys are produced using mechanical alloying technique. The X-ray diffraction indicates multiphase character of the samples, with the majority of hexagonal Ce$_2$Ni$_7$-type and rhombohedral Gd$_2$Co$_7$-type structures of (La,Mg)$_2$Ni$_7$ phase. Partial substitutions of La by Gd or Ni by Co in La$_{1.5}$Mg$_{0.5}$Ni$_7$ phase result in increase of cycle stability of the metal hydride (MH$_x$) electrodes. All considered alloys reach the maximum discharge capacity after three charging-discharging cycles. Two optimal compositions, in respect of electrochemical properties, are subsequently investigated by the X-ray photoelectron spectroscopy (XPS). The experimental analysis of the valence band is further extended by the density functional theory (DFT) calculations. We also discuss the effects of alloying and site preference of dopants on the position of the van Hove-type singularity, as observed in t

High-entropy alloys (HEAs) are attracting attention due to their exceptional properties, such as enhanced mechanical toughness, superconducting robustness, and thermoelectric performance. Numerous HEAs have been developed for diverse applications, ranging from self-healing in fusion reactors to addressing environmental concerns with thermoelectric materials. Understanding atomic diffusion within HEA crystals is crucial for these applications. Here, this study investigates diffusion mechanisms in PbTe-based HEAs, focusing on the role of indium (In). Molecular dynamics simulations reveal that In inclusion prompts spontaneous Frenkel defect formation, notably enhancing diffusion not only of In$^+$ but also other cations. Frenkel defect formation, closely linked to alloy properties, is predominantly influenced by charge rather than cation size. This insight not only enhances comprehension of HEA diffusion mechanisms but also develops HEAs with properties such as self-healing from damage and high ion permeability, advancing the field of material science.

Compositionally complex alloys hold the promise of simultaneously attaining superior combinations of properties, such as corrosion resistance, light-weighting, and strength. Achieving this goal is a challenge due in part to a large number of possible compositions and structures in the vast alloy design space. High-throughput methods offer a path forward, but a strong connection between the synthesis of an alloy of a given composition and structure with its properties has not been fully realized to date. Here, we present the rapid identification of corrosion-resistant alloys based on combinations of Al and Cr in a base Al-Co-Cr-Fe-Ni alloy. Previously unstudied alloy stoichiometries were identified using a combination of high-throughput experimental screening coupled with key metallurgical and electrochemical corrosion tests, identifying alloys with excellent passivation behavior. The alloy native oxide performance and its self-healing attributes were probed using rapid tests in deaerated 0.1 mol/L H2SO4. Importantly, a correlation was found between the electrochemical impedance modulus of the exposure-modified air-formed film and self-healing rate of the CCAs. Multi-element extende

Intermetallic Heusler alloys are amongst the most attractive half-metallic systems due to the high Curie temperatures and the structural similarity to the binary semiconductors. In this review we present an overview of the basic electronic and magnetic properties of both Heusler families: the so-called half-Heusler alloys like NiMnSb and the the full-Heusler alloys like Co$_2$MnGe. \textit{Ab-initio} results suggest that both the electronic and magnetic properties in these compounds are intrinsically related to the appearance of the minority-spin gap. The total spin magnetic moment $M_t$ scales linearly with the number of the valence electrons $Z_t$, such that $M_t=Z_t-24$ for the full-Heusler and $M_t=Z_t-18$ for the half-Heusler alloys, thus opening the way to engineer new half-metallic alloys with the desired magnetic properties.

Dislocations in single-phase concentrated random alloys, including high- entropy alloys (HEAs), repeatedly encounter pinning during glide, resulting in jerky dislocation motion. While solute-dislocation interaction is well understood in conventional alloys, the origin of individual pinning points in concentrated random alloys is a matter of debate. In this work, we investigate the origin of dislocation pinning in the CoCrFeMnNi HEA. In- situ transmission electron microscopy studies reveal wavy dislocation lines and a jagged glide motion under external loading, even though no segregation or clustering is found around Shockley partial dislocations. Atomistic simulations reproduce the jerky dislocation motion and link the repeated pinning to local fluctuations in the Peierls friction. We demonstrate that the density of high local Peierls friction is proportional to the critical stress required for dislocation glide and the dislocation mobility.

Martensitic and magnetic properties of ferromagnetic shape memory alloys are known to depend up on structural modulations and associated changes in the Fermi surface. These modulations although periodic and spanning over multiple unit cells, involve movement of atoms typically of the order of 0.01A. Therefore X-ray Absorption Fine Structure (XAFS) is an ideal tool to map both, local atomic movements and changes in density of states (DOS) due to changing hybridization as the system transforms from austenitic to martensitic phase. This paper presents a compilation of our XAFS studies on the Ni-Mn based shape memory alloys. A complete description of the changes in local structure around the constituent metal ions in the following alloy compositions: Ni2+xMn1-xGa, Ni2Mn1.4Sn0.6 and Ni2Mn1.4In0.6 in the austenitic and martensitic phases have been obtained. The results give the new experimental evidence for the crucial hybridization component that influences and leads to structural transition in these Ni-Mn based Heusler alloys.

Cu${}_{50-x}$Zr${}_{x}$ (x = 50, 54, 60 and 66.6) polycrystalline alloys were prepared by arc-melting. The crystal structure of the ingots has been examined by X-ray diffraction. Non-equilibrium martensitic phases with monoclinic structure were detected in all the alloys except Cu${}_{33.4}$Zr${}_{66.6}$. Temperature dependencies of electrical resistivity in the temperature range of T = 4 - 300 K have been measured as well as room temperature values of Hall coefficients and thermal conductivity. Electrical resistivity demonstrates anomalous behavior. At the temperatures lower than 20 K, their temperature dependencies are non-monotonous with pronounced minima. At elevated temperatures they have sufficiently non-linear character which cannot be described within framework of the standard Bloch--Grüneisen model. We propose generalized Bloch--Grüneisen model with variable Debye temperature which describes experimental resistivity dependencies with high accuracy. We found that both the electrical resistivity and the Hall coefficients reveal metallic-type conductivity in the Cu-Zr alloys. The estimated values of both the charge carrier mobility and the phonon contribution to thermal and e

(Fe,Co)$_2$B-based compounds with specified 5$d$ substitutions are considered as promising materials for permanent magnets without rare-earth elements. We conducted a combined first-principles and experimental study focused on (Fe$_{0.7}$Co$_{0.3}$)$_2$B alloys doped with W and Re. First, we used full-potential local-orbital scheme to systematically investigate (Fe,Co)$_2$B alloys with 3$d$, 4$d$, and 5$d$ substitutions. Computational analyses showed a significant increase in magnetocrystalline anisotropy only for the Re doped sample. Simultaneously, the structural and magnetic properties of the (Fe$_{0.7-x}$Co$_{0.3-x}$M$_{2x}$)$_2$B ($M$ = W, Re; $x$ = 0, 0.025) alloys were investigated experimentally. The desired (Fe,Co)$_2$B tetragonal phase was synthesized by heat treatment of amorphous precursors. We observed that isothermal annealing increases the coercive field of all samples. However, the obtained values, without further optimization, are well below the threshold for permanent magnet applications. Nevertheless, annealing of substituted samples at 750$^o$C significantly improves saturation magnetization values. Furthermore, Mössbauer spectroscopy revealed a reduction of the

Wide ranging interest in Dirac Hamiltomian is due to the emergence of novel materials, namely, graphene, topological insulators and superconductors, the newly-discovered Weyl semimetals, and still actively-sought after Majorana fermions in real materials. We give a brief review of the relativistic Dirac quantum mechanics and its impact in the developments of modern physics. The quantum band dynamics of Dirac Hamiltonian is crucial in resolving the giant diamagnetism of bismuth and Bi-Sb alloys. Quantitative agreement of the theory with the experiments on Bi-Sb alloys has been achieved, and physically meaningful contributions to the diamagnetism has been identified. We also treat relativistic Dirac fermion as an interband dynamics in uniform magnetic fields. For the interacting Bloch electrons, the role of translation symmetry for calculating the magnetic susceptibility avoids any approximation to second order in the field. The magnetic susceptibility of Hubbard model and those of Fermi liquids are readily obtained as limiting cases. The expressions for magnetic susceptibility of dilute nonmagnetic alloys give a firm theoretical foundation of the empirical formulas used in fitting e

Dilute bismuth (Bi) III-V alloys have recently attracted great attention, due to their properties of band-gap reduction and spin-orbit splitting. The incorporation of Bi into antimonide based III-V semiconductors is very attractive for the development of new optoelectronic devices working in the mid-infrared range (2-5 $μ$m). However, due to its large size, Bi does not readily incorporate into III-V alloys and the epitaxy of III-V dilute bismides is thus very challenging. This book chapter presents the most recent developments in the epitaxy and characterization of GaSbBi alloys and heterostructures.

We report the observation of giant magneto-caloric effect (MCE) in ferromagnetic shape memory alloys (FSMAs) of nominal compositions Ni$_2$Mn$_{1.36}$Sn$_{0.64-x}$Ga$_{x}$ ($x$ =0.24, 0.28 and 0.32). Irrespective of the Ga doping, all the samples undergo long range ferromagnetic ordering below around 330 K. However, the martensitic transition temperature ($T_{MS}$) of the samples varies strongly with Ga concentration. Clear signature of field induced transition around $T_{MS}$ is visible for all the samples. The observed MCE ($ΔS$ = 13.6 J/kg K for field changing from 0 to 50 kOe) is found to be highest for $x$ = 0.28 with peak near 249 K, while $x$ = 0.32 shows $ΔS$ = 12.8 J/kg K at 274 K. This series of Ga-doped alloys are found to be interesting materials with high value of $ΔS$ over a varied range of temperature

In an effort to produce Giant Magnetocaloric effect (GMCE) near room temperature, in a first ever such study, the austenite transformation temperature (As) was fine tuned to ferromagnetic Curie temperature (TC) in Ferromagnetic Shape Memory Alloys (FSMA) and a large GMCE of delta-SM = - 81.75 J/Kg-K was achieved in Ni50Mn18.5Cu6.5Ga25 alloy during reverse martensitic transformation (heating cycle) for a magnetic field change of 9 T at 302.5 K. Fine tuning of As with TC was achieved by Cu substitution in Ni50Mn25-xCuxGa25 (0< x < 7.0)-based FSMAs. Characterizations of these alloys were carried out using Optical and Scanning Electron Microscopy, X-ray Diffraction (XRD), Differential Scanning Calorimetry (DSC) and DC magnetization measurements. Addition of Cu to stoichiometric Heusler type Ni2MnGa increases the martensitic transformation temperatures and decreases TC. Concurrently, DSM increases with Cu addition and peaks at 6.5 at. % Cu for which there is a virtual overlap between TC and As. Maximum Refrigerant Capacity (RCP) of 327.01 J/Kg was also achieved in the heating cycle for 9 T field change at 302.5 K. Corresponding values for the cooling cycle measurements (measured d

Introductory chapter for the book "Halfmetallic Alloys - Fundamentals and Applications" to be published in the series Springer Lecture Notes on Physics, P. H. Dederichs and I. Galanakis (eds). It contains a review of the theoretical work on the half-metallic Heusler alloys.

CHUF (cooling and heating in unequal field) protocol allows establishing phase coexistence through macroscopic measurements and enables distinguishing the metastable and stable phases (amongst the coexisting phase fractions across a first order magnetic transition) of a glass-like arrested state (GLAS). The observation of kinetic arrest in magnetic shape memory alloys has become a very active area of research. We highlight recent CHUF measurements on these materials that show behaviour similar to that reported earlier in manganites and other intermetallic alloys, emphasizing the generality. The martensitic transition provides an opportunity to study various properties as the CHUF protocol enables tuning of phase fractions, and controlled devitrification, of GLAS.

We have investigated the plastic deformation properties of non-equiatomic single phase Zr-Nb-Ti-Ta-Hf high-entropy alloys from room temperature up to 300 °C. Uniaxial deformation tests at a constant strain rate of 10$^{-4}$ s$^{-1}$ were performed including incremental tests such as stress-relaxations, strain-rate- and temperature changes in order to determine the thermodynamic activation parameters of the deformation process. The microstructure of deformed samples was characterized by transmission electron microscopy. The strength of the investigated Zr-Nb-Ti-Ta-Hf phase is not as high as the values frequently reported for high-entropy alloys in other systems. We find an activation enthalpy of about 1 eV and a stress dependent activation volume between 0.5 and 2 nm$^3$. The measurement of the activation parameters at higher temperatures is affected by structural changes evolving in the material during plastic deformation.

Modulated martensites play an important role in magnetic shape memory alloys, because all functional properties are closely connected to the twin microstructure and the phase boundary. The nature of the modulated martensites is still unclear. One approach is the concept of adaptive martensite, which regards all modulated phases as nanotwinned microstructures. In this article, we use the Ni-Mn-based shape memory alloys as an example to show the geometric rationale behind this concept using analytic equations based on the phenomenological theory of martensite. This could enhance discussions about the implications of the adaptive martensite by showing the exact relations between the various unit cells used to describe the structure. We use the concept to discuss the compatibility at the habit plane, the nature of high-order twin boundaries and the dependence of the lattice constants on the different types of modulation.